
24/7 setup 3.6ghz..
intel burn test 5 loops... ambient temp 28C.. =)
Max Temp : 59C
Min Temp : 34C
Intel Q9xxx and Xeon 33x0 Family, Show the rest what Intel Quadies can do!
|
|
Sep 4 2008, 10:55 AM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,988 posts Joined: Aug 2005 From: Puchong, Selangor |
![]() 24/7 setup 3.6ghz.. intel burn test 5 loops... ambient temp 28C.. =) Max Temp : 59C Min Temp : 34C |
|
|
|
|
|
Sep 4 2008, 11:12 AM
|
![]() ![]()
Junior Member
124 posts Joined: Feb 2005 |
mind sharing how you can get temp so cool?
summore, i saw your vcore is 1.36v. hows your vtt, vdimm, GTL? my voltage a bit low than yours but my temp reach 70+ C max. |
|
|
Sep 4 2008, 12:27 PM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,988 posts Joined: Aug 2005 From: Puchong, Selangor |
|
|
|
Sep 4 2008, 01:10 PM
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6 |
|
|
|
Sep 4 2008, 03:18 PM
|
![]() ![]()
Junior Member
124 posts Joined: Feb 2005 |
QUOTE(IcEMoCHa @ Sep 4 2008, 12:27 PM) i see. now i know why. me same as -pWs- then.my fm123 just arrived & will try it tonite to replace the stock fan. hopefully can drop 2-3C or more. planning to get it below 70 C on load. if possible 65 C max. anyone here get same vdroop as me? i got 0.08 - 0.1 vdroop. dunno why. |
|
|
Sep 4 2008, 03:32 PM
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6 |
Haha..I think yours confirm not same w me.
Core 1/2/3/4: 72/65/60/60 -pWs- |
|
|
|
|
|
Sep 4 2008, 03:52 PM
|
![]() ![]()
Junior Member
124 posts Joined: Feb 2005 |
^
is it? mine way hotter then. |
|
|
Sep 4 2008, 04:40 PM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,982 posts Joined: Aug 2005 From: TTDI |
QUOTE(manutd #1 fan @ Sep 4 2008, 03:18 PM) i see. now i know why. me same as -pWs- then. did u enable loadline calibration?my fm123 just arrived & will try it tonite to replace the stock fan. hopefully can drop 2-3C or more. planning to get it below 70 C on load. if possible 65 C max. anyone here get same vdroop as me? i got 0.08 - 0.1 vdroop. dunno why. mine 0.04 drop when enabled, when disabled drop alot moar.......... |
|
|
Sep 4 2008, 05:21 PM
|
![]() ![]()
Junior Member
124 posts Joined: Feb 2005 |
will have to find that setting on my bios.
haven't seen it before. |
|
|
Sep 4 2008, 07:31 PM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,864 posts Joined: Jun 2008 |
Ok after many days and tests: my 24/7 settings:
3.5Ghz@1.256Vcore. Passes IBT 20 passes, Prime >12 hrs. 100% load temp under Prime 61C, under IBT 72C (spike only) 3.6Ghz is only stable at 1.32V, which I'm not gonna put my processor through 24/7 la =p 3.75Ghz (500Mhz FSB!) is stable at 1.4V, which obviously cannot lor long term.. This post has been edited by zer0hour: Sep 4 2008, 07:34 PM |
|
|
Sep 4 2008, 09:37 PM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,254 posts Joined: Jan 2003 From: Penang |
Damn , TPower I45 is so promising. Tangan gatal already. Anyone want let go their mobo below rm350? Haha
|
|
|
Sep 4 2008, 09:41 PM
|
![]()
Junior Member
48 posts Joined: Mar 2006 |
wahh bro zer0hour
i'm so jealous with your OC achievement for X3320.. i'll try mine too. .. heheh.. did we had to disable all CPU Features (in BIOS) except Multicore?! |
|
|
Sep 4 2008, 09:48 PM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,864 posts Joined: Jun 2008 |
QUOTE(Cyclone87 @ Sep 4 2008, 09:37 PM) Damn , TPower I45 is so promising. Tangan gatal already. Anyone want let go their mobo below rm350? Haha Haha cannot get la. I put WTT my Tpower with another P45 (my CCF is blocking my CM690's top fan socket cos of the Tpower's CPU socket arrangement) so many ppl pm me offering to buy for RM430 to RM440.But now that I've done so much testing I'm gonna live with -1 fan la =p death - I've replied your PMs d. I disabled all the CPU features while I was doing the stress testing, but now they're all back on, including C1E and EIST. |
|
|
|
|
|
Sep 4 2008, 11:15 PM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
5,656 posts Joined: Sep 2007 From: wheres d oil price is higher than condoms.. |
|
|
|
Sep 5 2008, 12:05 AM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,167 posts Joined: Mar 2005 From: sunway/petaling jaya |
lol wrong thread post...aiyaa..
anyway i cant believe that my processor consider good...i hit 3.66ghz on 1.232v and stable,somemore i got this processor without looking much just straight ahead buy from jetkiat since i saw his WTS quite for sometimes and ppl seem to ignore it... i got it on july 10 just before that price slash for rm850 seal box... now im feeling lucky lol...anyway ice mocha good result have you try to get stable on 4.0ghz?? for mine i think the ram hold me back coz in order for me to run this at 3.66ghz my ram performance level have to drop down to 8(its a 2gbx2 stick)..i try a few other combo but seem like havent got any good yet,anyway since you under water why not try to hit 4.0 stable just maintain ur fsb vtt and crank up those vcore volt since watercool should low those temperature tremendously.. This post has been edited by kaiser_falco: Sep 5 2008, 12:27 AM |
|
|
Sep 5 2008, 12:50 AM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,982 posts Joined: Aug 2005 From: TTDI |
fuyoo power oc result...gratz!
|
|
|
Sep 5 2008, 10:35 AM
|
![]()
Junior Member
48 posts Joined: Mar 2006 |
|
|
|
Sep 5 2008, 01:38 PM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,988 posts Joined: Aug 2005 From: Puchong, Selangor |
QUOTE(kaiser_falco @ Sep 5 2008, 12:05 AM) lol wrong thread post...aiyaa.. 4ghz stable ar? crazy ah... =.= yeah i agree ... i rather have high vcore than increasing the vtt... i will try to stabilise at 4ghz and get temp reading for u guys when i have time... anyway i cant believe that my processor consider good...i hit 3.66ghz on 1.232v and stable,somemore i got this processor without looking much just straight ahead buy from jetkiat since i saw his WTS quite for sometimes and ppl seem to ignore it... i got it on july 10 just before that price slash for rm850 seal box... now im feeling lucky lol...anyway ice mocha good result have you try to get stable on 4.0ghz?? for mine i think the ram hold me back coz in order for me to run this at 3.66ghz my ram performance level have to drop down to 8(its a 2gbx2 stick)..i try a few other combo but seem like havent got any good yet,anyway since you under water why not try to hit 4.0 stable just maintain ur fsb vtt and crank up those vcore volt since watercool should low those temperature tremendously.. |
|
|
Sep 5 2008, 06:23 PM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
2,547 posts Joined: Oct 2007 |
QUOTE(manutd #1 fan @ Sep 4 2008, 09:50 AM) i can't find any GTL setting in my bios. try to use coretemp 0.99.3 bro... this one is accurate or is it CPU Reference? if it is, i already put 0.9 if im not mistaken. The default is 0.5. anyway, what i the most trusted core temp reader program that can be used to measure cpu & system temp? coz my easy tune app read max 50-55 C during load but core temp & real temp read 70-73 C max during load. i macam got seen realtemp 2.75 but not sure if the tjmax is adjusted already..... QUOTE(IcEMoCHa @ Sep 4 2008, 10:55 AM) » Click to show Spoiler - click again to hide... « 24/7 setup 3.6ghz.. intel burn test 5 loops... ambient temp 28C.. =) Max Temp : 59C Min Temp : 34C ur tjmax not adjusted to 100 This post has been edited by tkh_1001: Sep 5 2008, 06:23 PM |
|
|
Sep 5 2008, 06:38 PM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,988 posts Joined: Aug 2005 From: Puchong, Selangor |
QUOTE(tkh_1001 @ Sep 5 2008, 06:23 PM) try to use coretemp 0.99.3 bro... this one is accurate oh.. forgot -.-... so its +5C for all temps... and im not uncle u grandfather.. i macam got seen realtemp 2.75 but not sure if the tjmax is adjusted already..... uncle.... ur max temp shud be 64c... ur tjmax not adjusted to 100 |
| Change to: | 0.0257sec
0.87
6 queries
GZIP Disabled
Time is now: 10th December 2025 - 11:18 AM |