Outline ·
[ Standard ] ·
Linear+
Intel Q9xxx and Xeon 33x0 Family, Show the rest what Intel Quadies can do!
|
TSCyclone87
|
 Aug 22 2008, 10:09 PM, updated 18y ago
|
|
I found it weird when i fail to find overclocking thread on this yorkfield series , therefore i open this thread after 5minutes of searching. Let dedicated this thread to Intel Quadies 45nm ( Codename : Yorkfield ) . Here the complete Yorkfield family list  QUOTE Yorkfield Family
Yorkfield 6mb L2 Cache
# Core 2 Quad Q9300 2.50Ghz (FSB 1333)
# Core 2 Quad Q9400 2.66ghz (FSB 1333)
Yorkfield 12mb L2 Cache
# Core 2 Quad Q9450 2.66ghz (FSB 1333)
# Core 2 Quad Q9550 2.83ghz (FSB 1333)
# Core 2 Quad Q9650 3.00ghz (FSB 1333)
Yorkfield XE 12mb L2 Cache
# Core 2 Quad QX9650 3.00ghz (FSB 1333)
# Core 2 Quad QX9770 3.20ghz (FSB 1600)
Xeon Yorkfield
# Xeon 3320 2.50Ghz 6mb L2 Cache
# Xeon 3350 2.67Ghz 12mb L2 Cache
# Xeon 3360 2.83Ghz 12mb L2 Cache C2Q 45nm users, come in and show me you break 4.0ghz barrier with your quad . I cant even break 3.5ghz properly with my X3320. Going to try harder later by pump up the vcore. This post has been edited by Cyclone87: Aug 23 2008, 09:35 AM |
|
|
|
|
|
TSCyclone87
|
Aug 22 2008, 10:16 PM
|
|
|
QUOTE(kucingfight @ Aug 22 2008, 10:13 PM) Technically, it's tough to get over 450fsb on quads. Even to stablised it on 440fsb is not easy Yea i was kinda disappointed because i was aiming for 4.0ghz just like my E7200. But stuck at 444FSB at the moment. |
|
|
|
|
|
TSCyclone87
|
Aug 23 2008, 09:00 AM
|
|
|
QUOTE(tech_frix @ Aug 23 2008, 07:50 AM) waaa....really need this thread!!! any X3320 user??? post up somtng lor....  Later i bump voltage on my X3320 all to max and see whether can break 450fsb wall or not.  |
|
|
|
|
|
TSCyclone87
|
Aug 23 2008, 06:55 PM
|
|
|
Damn it seem like going to 460FSB is not possible for me even i pump to 1.5v. But there is a guy at garage sales with the same X3320 doing 480FSB at only 1.3v .
|
|
|
|
|
|
TSCyclone87
|
Aug 23 2008, 10:51 PM
|
|
|
Anyone with P35-DS3 ? Which option in bios is the VTT? Seem like my bios dont have that option  |
|
|
|
|
|
TSCyclone87
|
Aug 23 2008, 11:55 PM
|
|
|
QUOTE(kucingfight @ Aug 23 2008, 11:28 PM) Bro, u got to understand, those boards without GTL ref has its limitation like most of the budget P35 yup..GTL ref,.it's useful on quads Damn now i know why there is ppl who buy those expensive board from shop. |
|
|
|
|
|
TSCyclone87
|
Aug 24 2008, 08:40 PM
|
|
|
Is intelburntest really that accurate? I pass 40 loops at 450FSB on 1.20 vcore. But then after the intel test, i open my IE, my computer just freeze out . Even super PI fail . But i can pass the test.
|
|
|
|
|
|
TSCyclone87
|
Aug 25 2008, 12:06 AM
|
|
|
QUOTE(tkh_1001 @ Aug 24 2008, 11:54 PM) wa...40 loop so much ka? better not be over stress till *touchwood* *touchwood*  i tried on 5 loops config only.... but it can only pass 2 loops when i already tested my proc to pass prime95 small fft for 7hours I put 40 loops then go sleep. Wake up, my pc still running. Click close program, and open IE, it hang. Then i restart run another 5 loops, drink coffee, it finished and success. Then i on microsoft word, hang again. Not sure why this happen, but problem solve after increase voltage. |
|
|
|
|
|
TSCyclone87
|
Aug 27 2008, 08:12 AM
|
|
|
Hmmm with board that capable to adjust the VTT/GTL how far more then can push the fsb? I was thinking to change to DFI P35 Iron because it has that features in the bios .
|
|
|
|
|
|
TSCyclone87
|
Aug 27 2008, 08:48 AM
|
|
|
QUOTE(tech_frix @ Aug 27 2008, 08:40 AM) what we need to change for??  Change the board so we can break the FSB barrier. I got problem looking at my Cpu speed below 3.4ghz. My target is close to 4.0ghz actually. Disappointed when got touch my processor. |
|
|
|
|
|
TSCyclone87
|
Aug 29 2008, 09:41 AM
|
|
|
Cheapest board with VTT/GTL around rm350 exist?
|
|
|
|
|
|
TSCyclone87
|
Aug 29 2008, 10:42 AM
|
|
|
Hmm what hsf you using ? I run 444Fsb at 1.25v and my temp also around 80C , but i m running fanless. |
|
|
|
|
|
TSCyclone87
|
Aug 29 2008, 11:21 AM
|
|
|
QUOTE(IcEMoCHa @ Aug 29 2008, 11:18 AM) Q9450 4.0ghz run 500fsb with superpi.. minimal tweak... lazy CPU-Z Validation <- Click for larger image Omg 500FSB. Mind share you tweak?  |
|
|
|
|
|
TSCyclone87
|
Aug 29 2008, 02:16 PM
|
|
|
I did some experiment with IBT last nite.
My X3320 at 3.33ghz only stable with around 1.3vcore.
So i go in window, and i use EasyTune, and tune down my vcore to 1.23volt. As i predicted, IBT max stress 40loops , all success. But after i close the IBT program, my PC straight BSOD.
My window is Vista 64bit. Window problem? Or my IBT problem?
|
|
|
|
|
|
TSCyclone87
|
Aug 29 2008, 04:49 PM
|
|
|
QUOTE(manutd #1 fan @ Aug 29 2008, 03:08 PM) same here. but not like straight away BSOD, i can't open welcome center and all application inside windows control panel. it happens if i set @ 3.3GHz above. Yes finally someone face the some problem like me. But the IBT test still pass no matter how many loops. I did tried 60 loops, success then hang. lol |
|
|
|
|
|
TSCyclone87
|
Sep 3 2008, 12:49 PM
|
|
|
I just boat to 6600 G0. But stuck at 3.2ghz. Bang my head on wall*  This post has been edited by Cyclone87: Sep 3 2008, 12:49 PM |
|
|
|
|
|
TSCyclone87
|
Sep 3 2008, 03:49 PM
|
|
|
QUOTE(tech_frix @ Sep 3 2008, 12:50 PM) on what vcore dude?? On default.  Anyway i think i back to X3320 because 6600 not that impressive. Cant go too far from X3320. Futhermore X3320 got nice name . My friend was like Woah, when i tell them my desktop is power by Intel Xeon. |
|
|
|
|
|
TSCyclone87
|
Sep 3 2008, 06:46 PM
|
|
|
QUOTE(zer0hour @ Sep 3 2008, 05:04 PM) Haha yeah, a lot of ppl impressed by Xeon name. My cousin came to my place, I asked him which he think is faster - my QX9650 or the X3320. He thought X3320 =p Cyclone - X3320 is ~5-10% faster than Q6600 at the same clock rate, due to Yorkfield core optimizations. That translates to 200-360Mhz (around there la) at our current overclocking So there's no point going back to Q6600 when X3320s can reach 3.5-3.6Ghz lor.. Yea i going back to my X3320 and run it at 450FSB daily. Gotta learn how to satisfied. |
|
|
|
|
|
TSCyclone87
|
Sep 3 2008, 08:12 PM
|
|
|
QUOTE(OC4/3 @ Sep 3 2008, 07:55 PM) Q6600 of your quality should hit 3.6ghz 24/7 Too bad , when open CPUz, core 2 quad. Not enough to impress my friend. |
|
|
|
|
|
TSCyclone87
|
Sep 4 2008, 09:37 PM
|
|
|
Damn , TPower I45 is so promising. Tangan gatal already. Anyone want let go their mobo below rm350? Haha
|
|
|
|
|
Quote
0.0602sec
0.41
7 queries
GZIP Disabled