Anyone with P35-DS3 ? Which option in bios is the VTT? Seem like my bios dont have that option

Also known as FSB Termination Voltage.
Try yourself as this vary from setup to setup

Bro, u got to understand, those boards without GTL ref has its limitation like most of the budget P35

yup..GTL ref,.it's useful on quads

Damn now i know why there is ppl who buy those expensive board from shop.

VTT, GTL, etc not available on P35 chip. it's introduced by intel on P45 board, iirc


side story ,
tested my OC 448*7.5 at 1.248v LOAD and successfully run IntelTestBurn 20 loops.
huge jump in temp and needed vCore compare to Prime95 (1.200v LOAD)



3DMark06 15931marks (earlier result with lower vCore and loose timing )


next mission, finding max OC at 1.000v LOAD

p35 chipset oso have vtt and gtl ref adjustment oso actually

if got, how to tweak it bro??

Those settings are available in some P35 mobos.... even my DFI Infinity Blood Iron P35-T2RL has it..... too bad that board is running on my 2nd rig with my E2160....

dont know bro...me noob don understand what the edgeofstability.com is saying


i heard abit ip35-e oso got

my bad. i just recalled dfi p35 board oso have it. so gayboard p35 missed those function out...

good point is that once u mess with vtt and gtl and u have no idea what u doing, u will end up aiming for nothing. just merry-go-round it's not for n00b like me hehe

update on x3320
430*7.5 at 1.088v LOAD passed 20x loop IntelBurnTest. now test clocking higher with that voltage

nice X3320...
where u got it??

got it from raksasalaut, seamonster

another update, seem like it cant go any higher than 430*9 without failing 20x IBT with 1.088v LOAD (bios= 1.14375, idle=1.104).

screenies and 16000+ 3Dmark06 post later

dat is soooooooo nice bro...
u got good mobo to pair up with the proc...
will get mine next week...

3.23GHz IBT 30 LOOPS!!!
Loadline Calibration:DISABLE
vCORE: 1.14375V
IDLE: 1.104V
LOAD: 1.088V





3DMark 06 v1.0.1
Score 16058
SM2: 6710
SM3: 6561
CPU: 5438

Is intelburntest really that accurate? I pass 40 loops at 450FSB on 1.20 vcore. But then after the intel test, i open my IE, my computer just freeze out . Even super PI fail . But i can pass the test.

how bout ur temp??
sounds error to me....
will trust OCCT and Orthos for stability test...
any tip for picking d best X3320??

This post has been edited by tech_frix: Aug 24 2008, 11:01 PM

Can't quite find batch info on teh internet. I suppose the lower the stock VID the better?
psst.. tech_frix.. alf booted into windows with 3.77ghz. 3.8ghz no boot.

will join d force this tuesday!!!i hope!!!
so ur VID as same as alf??

Yepp... stock vid 1.2v
What mobo ure going to match the x3320 with??

abit IP35-e...
is it ok ka??
maybe will stuck with fsb wall but as long as it can manage 3.2-3.3ghz @stock vcore, it should be great!!!!