Ohreally?

Now burning the 1st. board (remember 1st. patient thingy?) with this 10uH coil.. kinda like it now after 2 hours..
Am playing Sean Ghazi's Semalam.. old song sounding laid back.. very good indeed!

I've also made two 1uH value toroid inductors. Thought wanna replace the stock inductor.. Can't stop the music yet!

I am immune to that avatar oledi..

This post has been edited by jazzy939: Aug 31 2008, 01:48 AM

that monitor should be OK, how much new set now?
samsung should carry 2 to 3 yrs warranty.

If got budget go for 22" wide....good

hahah but 1 side 1uh 1 side 10uh weird...hahaha

new unit 650 or higher i think

good to get? hmm mayb ask for receipt, if there is 1 then ok...

sure lah...you see, you can understand all my Qs right? Even close to 2am now

can't stop music then take out your 2nd patient loh!

hmmm need to bring out secret weapon!!! hahaha

try and see if the 1uh any different with stock

2? Last nite I hit the sack at 3+

2nd patient cannot! Already been discharged! Well balanced that one.I am going to use 2nd. patient to drive my woofers in the bi-amp config. The force (bass) is strong with this one..

This is another verdict. Using a 10uH inductors is similar to having a 10uF input caps. The overall sounds that is.
Only some little details not quite the same. Small issue eh?

Take it out, bring it on, I am ready!

Yes. This is important! My gut feeling say it will oncertain aspects of the sounds.. need to find it out, right?

Will have to try out air core next!

This post has been edited by jazzy939: Aug 31 2008, 02:05 AM

wonder how many "turns" to get 10uH

About 23 turns of a 0.055mm enamelled copper wire
and about 14 for a 1uH inductor.

walau...bro jazzy really liau, i mean "air core"
faster go "recharge" by your music

hahah go go go

test the toroid 1uh vs the stock 1uh...

eh ongbs, samsung 1 year waranty only....

hmm there is another unit rm550, 1 month usage only....

will lcd quality degrade alot after longer usage?

actually I have already made one!, but NOT happy with the finishes. Need to improve the finished product. Don't have any idea yet..

'recharge'? I am charging now... hehe

---

Added on August 31, 2008, 2:31 amFinal for tonite.
The 1uF toroid inductors are IN!
Will burn in till morning after a short audition.. pretty good what I am listening now..

This post has been edited by jazzy939: Aug 31 2008, 02:31 AM

oh didnt compare with ori 1uh?

I am comparing both right now!
My verdict? I will replace ALL the stock inductors!

Findings:
midrange and high end got a little sharper. The cymbals sound are sharper with just the right attack/decay.
The stock 1uF input caps connected in series if were to be replaced with higher quality caps will definitely make this one leap to a new level!
The depth got slightly better. Slightly better ambience.

Damn. Hitting the sack at 3 again

oh the 1uh toroid is sharper then the ori 1uh??

hmm so the value does make a difference....haha...me loose

duno whats the caps value tht form the filter, will measure it tomolo i guess...

From what I heard, yes. Not much but there is.

Yes.. values also affect the output. It is part of a filter, remember?

The value is 0.47uF (C25, C27).
This one I saw being replace with a 220nF yellow coloured caps..

This post has been edited by jazzy939: Aug 31 2008, 03:01 AM

so 1uh is shapr and 10uh is warm...hmmm

supposingly 0.47uf

im thnking of sticking to the spec, since i edi have 0.47uf on the way...

.22uf is recomended for 4ohm speaker if i read correctly...

This post has been edited by xtorm: Aug 31 2008, 03:04 AM

220nF for 4 ohms? Hmmm yeah... I think so too!

Great. We'll keep the 0.47uF then! Bought already!

There's nothing wrong by sticking to the original spec.

Hitting the sacknow xtorm. Have a great day ahead! G'nite!

yea good nite...me dong the same too

gona test balance setup tomolo hope i dont burn anything

Balance? Great! You better do a review too, ya!