Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed
134 Pages « < 106 107 108 109 110 > » Bottom

Outline · [ Standard ] · Linear+

DIY T-Amp user/diyer come here :), TA2024 complete build board diy

views
     
jazzy939
post Oct 12 2008, 01:41 AM

reel is real
*******
Senior Member
8,186 posts

Joined: May 2005
From: Beaumont, Baile Ath Cliath, EIRE.



Oh yeah... sounds good! Thanks for the lead, will look into that! thumbup.gif

QUOTE(bsl555 @ Oct 12 2008, 01:35 AM)
Its quite possible to clone the X-10D. Nothing very complicated and you need a 12V tranny with voltage double rectifier for the B+. Remember that Ebay HK DIY site that sells the X-10D PCB kit? You get the same exact layout. The original X-10D does NOT contain super quality pcb or whatever. The DIY kit could be even better quality.
All in all, it may work out to be cheaper than the original X-10D and you can even add a ALPS volume pot after the buffer stage.
*
Y.C.
post Oct 12 2008, 01:57 AM

Casual listener
*****
Senior Member
906 posts

Joined: Dec 2006


I’d quite a tight schedule today, all non work related. I’ve also sold off my Epos m5 to a nice gentleman this afternoon whom I must say is happy with their flawless condition and loudspeakers are not even run-in as they were only used briefly.

We listened to some music through my Sansui cdp and T-amp; he’s really impressed with the T-amp and would be contacting Xtorm soon. Epos m5, like I’ve predicted, sounded a lot better than Q Acoustics 1010 when paired with the T-amp – wider soundstage with more depth and better bass to boot. I’m sad to see them go but happy on the other hand as they’ve finally found a new owner.

Jazzy, to your question whether my attenuator could be used as a pre-amp during the T/T session, I must say it’s soldered to my T-amp and must be de-soldered and soldered each time – too inconvenient and I must rule it out. The best solution is to ‘pinjam’ a passive pre for the session or make do with my test kit comprising of a 50k ohm Alpha carbon potentiometer connected to a pair of RCA connectors. If you guys really need it, I would need to buy and solder another pair of RCA connectors to it. Do let me know.


bsl555
post Oct 12 2008, 02:07 AM

Look at all my stars!!
*******
Senior Member
8,046 posts

Joined: Jan 2003


Hmmm..come to think of it, I have a Soundstage 6922 tube pre-amp. Highly modded by yours truly and using personally selected tubes. The stock version from Tong Lee is NO-WHERE by comparison. Trouble is, I didn't bother to fit an Alps 50k pot inside...lazy dah!.

This post has been edited by bsl555: Oct 12 2008, 02:09 AM
jazzy939
post Oct 12 2008, 02:08 AM

reel is real
*******
Senior Member
8,186 posts

Joined: May 2005
From: Beaumont, Baile Ath Cliath, EIRE.



Y.C.,
Glad that you can make it! Thought you must be terribly busy.. I was right. biggrin.gif

Question. Why are you keeping the Q Acoustics? tongue.gif

Your test kit should be sufficient, I think? Who would have a passive pre to pinjam? hmm.gif
If it's not already too much trouble on your side..

Anybody got any ideas/proposals?




QUOTE(Y.C. @ Oct 12 2008, 01:57 AM)
I’d quite a tight schedule today, all non work related. I’ve also sold off my Epos m5 to a nice gentleman this afternoon whom I must say is happy with their flawless condition and loudspeakers are not even run-in as they were only used briefly.

We listened to some music through my Sansui cdp and T-amp; he’s really impressed with the T-amp and would be contacting Xtorm soon. Epos m5, like I’ve predicted, sounded a lot better than Q Acoustics 1010 when paired with the T-amp – wider soundstage with more depth and better bass to boot. I’m sad to see them go but happy on the other hand as they’ve finally found a new owner.

Jazzy, to your question whether my attenuator could be used as a pre-amp during the T/T session, I must say it’s soldered to my T-amp and must be de-soldered and soldered each time – too inconvenient and I must rule it out. The best solution is to ‘pinjam’ a passive pre for the session or make do with my test kit comprising of a 50k ohm Alpha carbon potentiometer connected to a pair of RCA connectors. If you guys really need it, I would need to buy and solder another pair of RCA connectors to it. Do let me know.
*
Y.C.
post Oct 12 2008, 02:19 AM

Casual listener
*****
Senior Member
906 posts

Joined: Dec 2006


Jazzy,
I'm keeping my Q Acoustics for different application – purely to listen to music close range without the hifi connotation. I’d not be seeking for soundstage and ultimate bass extension with this setup and reason why I must get back the tonal balance and micro details as a result of replacing caps on power rail of my T-amp to Panasonic FM 1000uF.

Okay then, I shall go JP to buy another pair of RCA connectors for my test kit. biggrin.gif




jazzy939
post Oct 12 2008, 02:22 AM

reel is real
*******
Senior Member
8,186 posts

Joined: May 2005
From: Beaumont, Baile Ath Cliath, EIRE.



I see your point Y.C! biggrin.gif

Thanks in advance for the usage of your test kit.. and all! thumbup.gif
Y.C.
post Oct 12 2008, 02:27 AM

Casual listener
*****
Senior Member
906 posts

Joined: Dec 2006


You are welcome; it is all for the common hobby we share. thumbup.gif


TSxtorm
post Oct 12 2008, 02:42 AM

^O....OO.....ooo^
*******
Senior Member
3,160 posts

Joined: Jan 2003
From: KLANG!
ok the letter is from KLIA kastam, either i go myself or appoint poslaju to declare the stock, poslaju cost rm49.50 which i think is fair enough considering time travel there and tol and petrol...

didnt mention abt the amount need to pay for tax, so do i pay poslaju rm49.50 all settle? or there is more cost to it if i dont go myself
jazzy939
post Oct 12 2008, 02:58 AM

reel is real
*******
Senior Member
8,186 posts

Joined: May 2005
From: Beaumont, Baile Ath Cliath, EIRE.



I think, poslaju will be your 'handling agent' and will do the necessary 'clearing' for that sum.
Don't think there would be 'tax'. SIRIM was in the picture just to verify the stuffs, I think..? hmm.gif

btw bro, I got your stuff that you ask earlier. Unless you have forgotten? tongue.gif

QUOTE(xtorm @ Oct 12 2008, 02:42 AM)
ok the letter is from KLIA kastam, either i go myself or appoint poslaju to declare the stock, poslaju cost rm49.50 which i think is fair enough considering time travel there and tol and petrol...

didnt mention abt the amount need to pay for tax, so do i pay poslaju rm49.50 all settle? or there is more cost to it if i dont go myself
*
TSxtorm
post Oct 12 2008, 03:10 AM

^O....OO.....ooo^
*******
Senior Member
3,160 posts

Joined: Jan 2003
From: KLANG!
yea i remember, and i though you have forggotten tongue.gif

duno how much is the tax tho, hmm stupid me forgotten to change sending address.....sad.gif
jazzy939
post Oct 12 2008, 03:18 AM

reel is real
*******
Senior Member
8,186 posts

Joined: May 2005
From: Beaumont, Baile Ath Cliath, EIRE.



great. will pass it during our TT session.

I am sure next time you will not forget! tongue.gif


QUOTE(xtorm @ Oct 12 2008, 03:10 AM)
yea i remember, and i though you have forggotten tongue.gif

duno how much is the tax tho, hmm stupid me forgotten to change sending address.....sad.gif
*
Y.C.
post Oct 12 2008, 10:24 AM

Casual listener
*****
Senior Member
906 posts

Joined: Dec 2006


Xtorm,
I'd agree with Jazzy - let Poslaju be the clearing agent for you.

If it's purely to do with Sirim, the question of tax has not arisen yet; even there is possibility of tax later, Poslaju should handle the matter better than you do.

I could sensed that you're still worried, try to relax a bit bro.

QUOTE(xtorm @ Oct 12 2008, 02:42 AM)
ok the letter is from KLIA kastam, either i go myself or appoint poslaju to declare the stock, poslaju cost rm49.50 which i think is fair enough considering time travel there and tol and petrol...

didnt mention abt the amount need to pay for tax, so do i pay poslaju rm49.50 all settle? or there is more cost to it if i dont go myself
*
jazzy939
post Oct 12 2008, 01:06 PM

reel is real
*******
Senior Member
8,186 posts

Joined: May 2005
From: Beaumont, Baile Ath Cliath, EIRE.



bro xtorm,
as advised by Y.C, take it easy k.. It's just paperwork/protocol exercise. Just look forward to our first T-Amp TT Session! biggrin.gif
TSxtorm
post Oct 12 2008, 01:30 PM

^O....OO.....ooo^
*******
Senior Member
3,160 posts

Joined: Jan 2003
From: KLANG!
haha, i was worry but not to the extend tht it takes over my life ;P

yea ill appoint pos laju for the matter, all i have to do now is wait for them to call me for futher info? they dont need any document for me right, since parcel was written a gift, there is no such thing as invoice or receiptmah tongue.gif parcel value they put usd25 or 30, not too sure...
jazzy939
post Oct 12 2008, 01:47 PM

reel is real
*******
Senior Member
8,186 posts

Joined: May 2005
From: Beaumont, Baile Ath Cliath, EIRE.



yep. all you need to now is wait. biggrin.gif
btw, have you 'talk' to poslaju so that they can take up the matter? I think you have to pay that RM49.50 first for the services.
ongbs
post Oct 12 2008, 06:31 PM

Who am I ?
******
Senior Member
1,083 posts

Joined: Sep 2004
QUOTE(bsl555 @ Oct 12 2008, 12:37 AM)
I've always thought opamps are nearly always lower noise, less prone to HF radio interferences and more accurate (which doesn't always translate to better sound) than discreet which anyone is going to have a tough time in the layout and implementation which will contribute to a variety of problems. Preamps is the next most difficult stage to build up to achieve a high standard. Of course the worst is a phono stage. The smaller the signal amplitude, the harder to deal with.
Having said that, there's so many opamps to play with and its entirely up to you for your own flavor. It's tough  to tune discreet components.
*
How about this bro smile.gif
http://66.196.80.202/babelfish/translate_u...32%2520yd-b.htm
jazzy939
post Oct 12 2008, 06:48 PM

reel is real
*******
Senior Member
8,186 posts

Joined: May 2005
From: Beaumont, Baile Ath Cliath, EIRE.



Looks good. Very well laid out.
out of stock? how much eh?

QUOTE(ongbs @ Oct 12 2008, 06:31 PM)
ongbs
post Oct 13 2008, 02:03 AM

Who am I ?
******
Senior Member
1,083 posts

Joined: Sep 2004
QUOTE(jazzy939 @ Oct 12 2008, 06:48 PM)
Looks good. Very well laid out.
out of stock? how much eh?
*
Not sure about the price, maybe can ask our bulk sifu-------xtorm to contact them tongue.gif
Y.C.
post Oct 13 2008, 11:19 AM

Casual listener
*****
Senior Member
906 posts

Joined: Dec 2006


Xtorm, do share with us the progress of 'problem' with SIRIM/KLIA Kastam the moment you receive latest news, k?


bling*2
post Oct 13 2008, 07:59 PM

Getting Started
**
Junior Member
134 posts

Joined: May 2006
From: ~...Heaven...~
There's agent from my company, and i ask him to check out the taxed incurred for me when he's there. Well, the Kastam declare that's a phone. but they didn't actually open up the parcel and check. So my agent request to open up and check out, they need the invoice and specification for clearance.

As the suplier stated it was a gift, the kastam ask why it's a gift? So i planned the story that it use for amp, and the thunder burned it, this is for replacement. The kastem request for original receipt and warranty letter and so on rclxub.gif ~Is lady officer, you know la doh.gif
And they actually want to take it for What sirim test this and that.So, i just ask the agent to Gao Tim it.

If we're using pos laju, they might need those invoice, specification and so~ding ding dong dong. Don't know when can clear out. Another charges if delivery needed to send it. Else, pos laju will send it to nearer post office and I need to go and take it out.

So,in the end, i didnt appoint the POS laju. Since i ask my agent to check out, so i ask him to settle for me smile.gif




134 Pages « < 106 107 108 109 110 > » Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
0.0279sec    0.71    6 queries    GZIP Disabled
Time is now: 13th December 2025 - 08:01 PM