Hehe..

I doubt it if there would be any sonic differences detectable.. unless you have super duper hearing capabilities.. 

Anyway, do report in if there is any..

Have you completed the assembly of the whole kit?

That’s a fair statement!

But important thing is, how's the sound now?

Oh yes.. this is true. T-Amp NOT suitable for driving headphones...

Customs? As in? 

ongbs,
my donuts that I wound seems to be performing terribly well. The airiness is excellent! On my 'teeny weenie' donuts, I need about 14 windings to get it right.
I guess the type of materials of the donut have direct influence over the inductance, hence the final audio output.
Will be a permanent feature on my first board, on my second board, I want to use a heavier wire gauge or an air core.. coming, next change

Only 5 huh? Lets see some pix!!

never notice that i already have this great amp...nearly sold few month back...i'm so lucky then...here my yulong t-amp internal pic...



but will start shopping for diy part tomorrow...hopefully nothing goes wrong as i'm super noob in diy

hello! Berapa banyak T-Amp you mau?

Probably this is already stale news but here’s my own experience with the T-amp kit:

I helped my colleague (one of the guys I managed to poison) to solder an el-cheapo RM3.00 volume potentiometer to the T-amp using JP’s 40sen per metre multistrands wire and plugged it into and bypassing the built-in amp of a JVC UX-5000 midi compo in my office.

When the sound comes about after ridding off some initial hums, viola, it sang so well. I had never heard my JVC midi to sound so complete before – the clarity, details, tone of instruments, macro dynamics, decay, the emotion factor, PRaT and not forgetting the bass I am now hearing through the 3” paper-cone speakers are awesome. I was also able to notice the recording of a particular CD was made from aged master tape, yes, the T-amp is that transparent! And all these from a RM55 kit amp? Hard to believe but it’s definitely true. So much so, when we finally took out the T-amp from the JVC midi, it was rendered not listenable anymore – blur by comparison.

The day proceeded with both guys I poisoned calling /sms-ing me at my mobile even at wee hours of the night. Boy, both are badly poisoned and excited by the unbelievable sound they are getting from their T-amps.

A finding by my friend (the other guy poisoned by me) – he has been following comments made by forumers of this thread and he experimented with some input caps himself before finally settled for my extra pieces of made-in-Portugal Vishay 2.2uF 63V polypropylene caps. He noticed that the slight pop sound to loudspeakers after changing input caps are still there even with these caps and thought perhaps the offending small caps which came standard with the T-amp kit are more to discharge off the extra charge stored in the caps and so to take care of pop sound rather than to enhance the sound quality. He felt with Vishay 2.2uF, the highs are more apparent, sweeter-sounding and more ‘flesh’ to vocals. Hmmm, ……

As for my own T-amp, I shall be fixing a 24-steps 50K ohm discreet attenuator to it and commence work after office today after having double-confirmed the input/output soldering points to it. And at rate things are progressing, I reckon I will spend my entire weekend with my T-amp. 

hahah bro great to hear that

btw got your sms, im totally not free tis weekend, my friend also bugging me abt the t-amp for his car,try once edi kena very deep

so probably meet u up next week at working hours or see howlor...h

hahaha

canot ah tea timemah....

wei u got alot of support wor...hehehe i mean the other side

Heyy. What you guys talking about ler... 

Oh yes.. we're always on the look out for 'gems'..
Personally I have NOT used any Vishays. This would be the first time. No doubt we have read all the good words, in the end, the proof in the pudding is in the eating, and we'll know soon enogh! I don't think it will disappoint our expectations

We're gonna be busy this weekend, huh?

BTW, do caps need to be 'burned in' too? 

some people are not bothered. as long as they have what they wanted, thats all it matters. don't want to share anything.
isn't that selfish?

aik. where are they?

  and I was referring it to you!
Hey.. pics of your post- 'King donuts' are sopposed to be uploaded

Thanks on compliment on wooden casing. I like natural woods but most people will actually look at the issue here as it is people like me who caused more trees to be felled. 

Y.C.,
You're most welcome
True to the words, we're doing this, ie sharing and learning at the same time because of our passion. Yes.. time for me tocontribute after all this while just reading and learning all those great stuffs from the forums all over 

Local mag? Engaging us? Would you accept the offer?  I would!    I got to play with the TOYS! 

Nah NOT the Cerafine, just a 'normal' one.. Will put up some pictures later.. I am 'not at home' this moment..

Can't wait to get my other stuffs for the 'upgrade'.. looks like more reviews coming up...

Eh, don't la like that bro..
We're here to share mah... incl. pix!

what's leng lui?????????

joint....will give answer tomorrow