= =
But usually,if the orthos fail,gaming me will BSOD.But after increased VCore abit,orthos fail,when gaming no BSOD..

5000 Black Edition | anep | ax78 | Corsair | 800 | 4-4-4-12 | Freezer64 Pro

isn't it something missin?

The Speed of processor and the ram speed.

Maybe he want to enter entry using default speed ler

-pWs-

Hi to all OC Guru

Need advice to oc my proc to 3.0GHz.

Here my cpuid

Can i push this proc with my lame ram?

Please share your setting with me . Just for reference.tq

increase [vNB 1.1] to 1.20v, add some vcore, voila... there u go...

This post has been edited by ah_khoo: Jul 26 2008, 12:07 AM

Mine so far 3.4Ghz @1.4V only

Orthos and prime are very sensitive to errors, both are made to create and detect them. Games on the other hand, will only hang if theres smth wrong which affects them directly. End of the day, orthos/prime is the best reference for stability, though there are times where they might be wrong

whers ur ss? its quite good to achieve 3.4 within 1.4...mine need 1.425 to achieve 3.4..3.6 might achievable if ur in an air conditioned room..

i have been reading many link on the overclocking info. i'm headache. too much info.
lowered my htt and increase my vcore to 1.45 and i cant push to 2.5ghz.

@imsmiko
can u list ur hardware plz..

please check my first signature.
change few parts today.

This post has been edited by imsmiko: Jul 26 2008, 02:58 AM

plz follow the format that attached at first post,
New Announcement:
-I made some changes, because this is the OC thread, all default speed processor will not key in to the main database
-To enter u must have at least 10Mhz increment from the default speed

thx, happy overclocking

No need to increase vcore that high. 1.25~1.3v is enough for 2.5ghz.
Try to lower NB(northbridge) multiplier and HT link. Make sure both speed are the same using cpu-z.

Finally.. Break the 3.0GHz barier.

Can I enter the AM2 clan?






My ram is rojak Kingston(Hyundai) 1GHz 600Mhz+Kingston 1GHz 800Mhz

Dont know how to write in the offical format la.

do u need to pump that much vcore to achieve 3Ghz ?

So stressing the oc with orthos (at least 1 hour) or SPI 32M
and post the SS is all pass ..then ur oc resuft will in AM2 OC clan database

My screen blackout at 1.35v while Super PI 32M ,so pump up more power .
Try again and pass Super PI 32M,
Now running stable.. but not running orthos yet ..busy finishing my report

Is my vcore to high?
It is effect my ram?

vcore is no high ..we do hv a ocer from here so same with u 1.40v at 3ghz

ur ram...u should use 2T mode for command rate
use all the ram setting at auto and set command rate (CR) to 2T
ur ram will run more stable if u use 2T then 1T (1T ram will run more faster but no stable)