use all the ram setting at auto ? What do you meant?
I've set to 667.

fail to boot up after change to 2T using memset.

667Mhz is ram divider.
I think what bro digwell meant is the ram timing.

-pWs-

Already run orthos for 6 hours straight




Super PI 32M


Can i enter the clan? Cpuz and memory detail have been sent in previous reply.

Good ....see like is stable edy at 3ghz.
wat is cpu temp ?? maybe can usage for 24/7

oc the at big higher see how far the cpu can go if the temp is ok ...maybe 3.2ghz or 3.3ghz (for database only )

OFF TOPIC
U stay kampung melayu subang....4 years ago i work near there subang perdana

This post has been edited by digswell: Jul 27 2008, 10:26 AM

Plz follow this code, i will not enter urs until u do so

For 32M n OCCT database

CODE

Processor Model | LYN Nick | Mobo Model | Ram Type | Ram Speed | Ram Timing | Cooler Model

For SPI 1M

CODE

Time | Nick | Speed HTT x multi | motherboards | ram model & capacity | Ram speed & timing | cooler model

Great achievement there.. push more la bro..

For 32M n OCCT database


For SPI 1M

[/b]

Idle Temp

20minute with orthos



I think the tempature is very high la. (already open the case sidepanel+blowing kipas at it and me). My room dont have aircond

How about your temp?.


This post has been edited by MENCHELSEA: Jul 27 2008, 05:55 PM

try to include cpu-z showin ya cpu & memory timin mate...

Try dropping the vcore to around 1.35v. My brisbane 4400+ G2 runs stable at 3ghz around that vcore.

Edited

eh....ur using unmatched ram.....could be why you need higher volts to be stable

u need to take d orthos screenshot along with d cpu-z, else ya entry won't be considered i think...

for example like this...

My CRT Screen can only support 1280x768. Can not go any higher la.

Wanna ask ~xixo_12~ if she accept all my printscreen result.

or you can borrow your monitor to me?

aiyoo .. u done all the necessary. theres no reason xixo wont put ur name la.

any updates on the sb750?

u don't need to do exactly what i did... be flexible abit lah...

something like this would be enuf...

hi boys. did everything. lowered the htt and push the voltage. disable cool and quite and virtualization. update bios and i am only able to push to 2.47g.

mind to post ya cpu-z showin cpu & mem timin tabs mate? do include hardware monitor too if possible to show d voltages...

Here you go mr khoo. This what I am running now.


Attached thumbnail(s)

lower ya htt link usin lower htt multi.

vdimm = ???

before i did lower my htt to 1.400mhz. and 1000mhz. didn't help.