Just bought WRT54GL v1.1 .

Flash this file?
-Tomato_1_23.7z (WRT54G_WRT54GL.bin)


can i revert flash back linksys official firmware??

Thanks

---

Added on December 27, 2008, 9:35 pmsuccess flash to tomato firmware ^.^


do i need Erase all NVRAM?

This post has been edited by yangxi: Dec 27 2008, 09:35 PM

after flash to tomato 1.23

problem:
-wireless ipcam can't detect.
-PPPOE also cannot connect.

now revert back official firmware. work properly .
weird~..

Billion 5112s modem (ip: 192.168.1.254)
Router (ip: 192.168.1.254)


--------------------------

2.) Tomato_RAF_1.23.8500ND.7z (ND = new wireless driver)

WRT54GL 1.1 can flash ??

might test vitek version later~.

This post has been edited by yangxi: Dec 28 2008, 06:16 PM

official stock firmware cannot login telnet. Need flash 3rd party firmware first ??

ok, today flash to Tomato RAF 1.23.8025 version.

wireles & p2p everything works fine.


-nice background (dark color)compare tomato ver.. . can change color?
-Can enable back router led (cisco logo) ?



problem (view in IE7):

-http://192.168.1.x/qos-detailed.asp (no respond , hang)
-Can't view graph in Bandwidth & QOS page.

but Firefox 3 works fine.

This post has been edited by yangxi: Dec 29 2008, 06:41 PM

thanks

What is easier,best way to set high priority only for HTTP browsing and also not affected P2P.




2.) Login telnet, but pass/user incorrect. why not same with router password?

Router
WRT54GL 1.1 (CL7B) , might want test this -> Tomato RAF 1.23.8505ND.

tomato-ND.trx , can flash without renaming?

4mb streamyx user.
i'm heavy BT download. want give high priority for browsing and youtube without lag. sharing internet to my neighbour

or just enable TCP VEGAS??


2.) Bridge LLC or VC-MUX from billion 5112s modem. any differents?

please help. thanks.

This post has been edited by yangxi: Dec 29 2008, 10:58 PM

ok, i will do more test.


1 more question:

can we tweak ? what is best safety range.
-CPU Frequency
-Transmit Power Mw

minor problem:

- When do wireless setting (basic&advance page) , router reconnect WAN PPPOE.

can disable it? because quite hard to get some TMNUT ip range.


======================================


# nvram get wl0_corerev (press enter)

my router is "9"


Tomato RAF 1.23.8505ND.
tomato-ND.trx , flash without renaming?


This post has been edited by yangxi: Dec 30 2008, 08:53 AM

try Victek version. Interface looks great.


found out problem:

When login using IE7, QOS view detail load long time .. feel hang. but firefox don't have problem.

victek version can solve this. lowest class for xunlei and limit outbound bandwidth (5% - 50%).
*suggest turn off DHT,Upnp.

but found out problem , PPPOE not stable and reconnect every 2-3hrs.
my last billion 7402gl modem connection active more than 90days.



question:
- If run 24/7 , does it use out all Free Memory ?? because memory keep decrease.

some tmnut iprange hardly get, don't want restart router.



wish tomato have this feature .... ~


today try Victek v1.23.8505 firmware. my wireless ipcam signal increase 9% -> 22% without increase tx power

This post has been edited by yangxi: Jan 2 2009, 11:35 PM

After flash new ND version firmware and clear nvram. connection getting better.

but this router can't handle faster speed torrent?

get disconnect peak 400kb/s.




Jan 3 02:00:01 unknown syslog.info root: -- MARK --
Jan 3 03:00:01 unknown syslog.info root: -- MARK --
Jan 3 04:00:01 unknown syslog.info root: -- MARK --
Jan 3 04:17:18 unknown daemon.warn pppoe[116]: LCP appears to be disconnected (pending: 5).
Jan 3 04:17:18 unknown daemon.notice pppoe[116]: Disconnected.
Jan 3 04:17:18 unknown daemon.notice pppoe[116]: Connect time 624.6 minutes.
Jan 3 04:17:18 unknown daemon.notice pppoe[116]: Sent 1806241577 bytes, received 3496749250 bytes.
Jan 3 04:17:29 unknown daemon.notice pppoe[116]: Connected.
Jan 3 04:17:29 unknown daemon.notice pppoe[116]: IP Address: 60.53.x.x
Jan 3 04:17:29 unknown daemon.notice pppoe[116]: DNS Address: 202.188.0.133, 202.188.1.5
Jan 3 04:17:29 unknown daemon.info dnsmasq[396]: exiting on receipt of SIGTERM
Jan 3 04:17:30 unknown daemon.info dnsmasq[1798]: started, version 2.46 cachesize 150
Jan 3 04:17:30 unknown daemon.info dnsmasq[1798]: compile time options: no-IPv6 GNU-getopt no-RTC no-DBus no-I18N no-TFTP
Jan 3 04:17:30 unknown daemon.info dnsmasq[1798]: DHCP, IP range 192.168.1.100 -- 192.168.1.149, lease time 1d
Jan 3 04:17:30 unknown daemon.info dnsmasq[1798]: reading /etc/resolv.dnsmasq
Jan 3 04:17:30 unknown daemon.info dnsmasq[1798]: using nameserver 202.188.1.5#53
Jan 3 04:17:30 unknown daemon.info dnsmasq[1798]: using nameserver 202.188.0.133#53
Jan 3 04:17:30 unknown daemon.info dnsmasq[1798]: read /etc/hosts - 0 addresses
Jan 3 04:17:30 unknown daemon.info dnsmasq[1798]: read /etc/hosts.dnsmasq - 3 addresses
Jan 3 05:00:01 unknown syslog.info root: -- MARK --


Jan 5 03:59:16 unknown daemon.warn pppoe[826]: LCP appears to be disconnected (pending: 5).
Jan 5 03:59:16 unknown daemon.notice pppoe[826]: Disconnected.
Jan 5 03:59:16 unknown daemon.notice pppoe[826]: Connect time 625.1 minutes.
Jan 5 03:59:16 unknown daemon.notice pppoe[826]: Sent 1705174483 bytes, received 2354120756 bytes.
Jan 5 03:59:24 unknown user.info redial[825]: WAN down. Reconnecting...
Jan 5 03:59:24 unknown daemon.info dnsmasq[835]: exiting on receipt of SIGTERM
Jan 5 03:59:24 unknown daemon.info dnsmasq[1968]: started, version 2.46 cachesize 150
Jan 5 03:59:24 unknown daemon.info dnsmasq[1968]: compile time options: no-IPv6 GNU-getopt no-RTC no-DBus no-I18N no-TFTP
Jan 5 03:59:24 unknown daemon.info dnsmasq[1968]: DHCP, IP range 192.168.1.100 -- 192.168.1.149, lease time 1d
Jan 5 03:59:24 unknown daemon.warn dnsmasq[1968]: no servers found in /etc/resolv.dnsmasq, will retry
Jan 5 03:59:24 unknown daemon.info dnsmasq[1968]: read /etc/hosts - 0 addresses
Jan 5 03:59:24 unknown daemon.info dnsmasq[1968]: read /etc/hosts.dnsmasq - 3 addresses

This post has been edited by yangxi: Jan 5 2009, 08:13 AM

this



This post has been edited by yangxi: Jan 12 2009, 07:58 AM


Attached thumbnail(s)

you mean menu color?

http://xxx/admin-access.asp -> Color Scheme

try revert old firmware 1.19

Tomato 1.19 SpeedMod
http://netsalvo.com/tomatomod/Tomato119-SpeedMod-8502.7z

Tomato 1.19 ND SpeedMod
http://netsalvo.com/tomatomod/Tomato119ND-SpeedMod-8502.7z


and also fix pppoe disconnect issue.

This post has been edited by yangxi: Feb 18 2009, 08:45 PM

wifi don't have problem. did you adjust Transmit Power?



This post has been edited by yangxi: Feb 19 2009, 10:10 PM

how do block wan access , but still allow wifi client.

thanks~ try later.

i have 2 adsl line different ip, connect same switch. want restrict wifi user connect one of internet line.

This post has been edited by yangxi: Mar 4 2009, 05:40 PM

yes. can.

before flash, please read intruction.

http://www.polarcloud.com/f/Tomato_1_23.7z

run whr_install.bat

use ND version
http://victek.is-a-geek.com/tomato.html

http://cdn.adslzone.net/pub/repos/victek/T...1.23.8513-ND.7z