Do let us know of the diagnosis. I hope this is an isolated issue. I watched 2 movies in a row yesterday afternoon; P2 and Vantage Point. The pj doesnt seems to be 'quiet hot'

Are you sure Optoma does the downscaling job?
I noticed the HDMI still read the same 1080p on the blue display. I think it failed to downscale. It would have been either 1080i to be accurate.

That's the reason i go for 720p for the Native Precision.

Just watched Celine Dion, it was awesome. Planning to get Mariah Carey.

This post has been edited by hackwire: Jul 7 2008, 11:54 PM

Some shot taken using IS080 on tripod. Cheapo digicam Ixus80IS. Manual setting with timer. Not very nice. Maybe need to use DSLR


Black Hawk Down






300




Room : Darkened (Night time)

This post has been edited by htkaki: Jul 9 2008, 09:21 AM

yes... cos it is native 720 ...how to squenze more pixel out??

they use so called software rendering to down/squenze more pixel into less pixel display

for 1080i is diff stori lo.... it feed 540 at 1 time !

that's wat i mentioned before. Different camera has different reproduction. We cannot judge the quality of the pic with cameras. It looks like recording for pirated movies..haha.!!

Is optoma HD65 come with colour adjustment? Coz i need to get the true colour of photo

This post has been edited by enriquelee: Jul 11 2008, 01:50 AM

It does have a setting for photo in the menu but I am not sure whether it is giving out true colour of photo as I am totally hopeless in photography. Maybe other HD65 users can give their opinions / views on this.

Anyway, here's the features :

http://asia.optoma.com/product/ProductDeta...==&Type=Feature

Not sure if this is what you're looking for, but have a look at post #953 for the screen shot of the HD65 OSD menu.
http://www.avsforum.com/avs-vb/showthread.php?p=14051759

guys,

advisable to put aircond where the pj room is located? would ceiling fan suffice the longetivity usability issue

thats why better buy AE2000 from HTleg.. got free bulb..

I think normally if bulb blow, not covered under waranty right? even if it's few months old and 200-300hrs only..

iman, the cooler the better, but my peasant living hall fan nia

i think a cooler environment is better for the pj .. of course i am not an engineer who knows what i am talking abt .. i just read from other forums so if they r wrong, i am wrong too..... my aircon was always blowing at my pj direction but my pj lamp paucha also after some low hours usage

yeah i wanted to install but then my house is only on single plase...got two 1.5 aircond install already...

if got i dedicated room must install another 1hp aircond scared it would just trip if all on together...

This post has been edited by iman_210: Jul 11 2008, 11:57 AM

I think most probably will trip since single phase can support only 3hp only and you are using 4hp. correct if I am wrong.

single phase max usually=60A so approx 4-5hp simultaneously on.

i have about 5hp on simultaneously on single phase is ok, which leaves some spare for the water heaters, lights, etc.

woohoo.. my pj is ready to be picked up with a new bulb .. i dont say this often abt hifi stores but hiway laser did gave me the best service possible.. all done in four days .. what surprised me the most was they update me everyday with sms abt my pj without me asking them.. i have nvr known any shop that does that... big thumbs up to them!!!

if that the case then yuhuu...a dedicated room would be on its way then...thanx for the advise guys...hope for a lotful bonus...

Going to join our club eh?

As for my pad, the combined hp is 5.5. But, never on above 2 units since only 3 of us in the pad. So, single phase aint a problem to me (for now)

Thanks for the link htkaki and kiam

my sofa arrived