Singapore has a chinese input , Squall_kay is using one. Confirm with him Yes SEUS will download the update first.If you just change the CDA you wont have the firmware for that CDA, you must go through SEUS to have the firmware for the CDA you flashed.

Well T shirt printing (from my knowledge) uses an image then printed on top of the shirt by a sticky substance (rubber?) then it awaits to be dried. So theoretically it should be doable. I created a high res CMYK 16bit image of the curved lines, should be able to do it.

Not only your phone has two CDAs , it appears to have three firmwares on the phone as well (besides I think the word CCPU refers to the P1i ressurrection firmware that is used when a P1i is bricked or locked due to failed flashing,someone please confirm this). Someone should have tampered your phone and flashed multiple CDAs like mine. I have Austria and Indonesia CDA
If your phone doesn't have the focus bracket, I think you might have to flash your phone again. Better take it back to the shop and ask them to do for you. Since theres 3 firmwares and 2 CDAs, it might be better for them to do it.

This post has been edited by carbon14: Apr 28 2008, 12:04 AM

sorry but i',m a newbie here. wad does bricked mean?
if my phone has ever been bricked before will it somehow make it bad or something?
can i flash it myself?
does having multiple cda affects the phone in any way?

This post has been edited by n0name8886: Apr 28 2008, 12:24 AM

Its a badly flashed phone, but basically it won't bring any harm to your phone.
What you can do now is either:
1. If you need Chinese read and write, change the firmware to SG firmware.
2. If you do not need Chinese read and write, change the firmware to GW firmware.
How to do? My sig got teach you.

Yes SG firmware has Chinese input, I'm using it not squall_kay.
He's using GW firmware.
He itu the x paham itu Chinese.

Why his phone don't have focus bracket?
Cause he's on older version of firmware.
New users are lucky you all can have the focus bracket thingy on your phone.
We old user have to wait 2 firmwares until we can get the focus bracket thingy.

This post has been edited by Shufflerz: Apr 28 2008, 12:38 AM

i need chinese. can u gimme the link on how to flash my phone?
if i fail to flash it can it be rescue?

sorry sorry... too rushy just now...
if i go back to the shop will they charge me?

wanna ask y'all...
i wanto flash my firmware to singapore chinese...
and i followed the steps provided here...
but at the end of the SEUS update, it says Update Failed!
can i know what's goin wrong?

another thing...
how to set contact ringtone?

thanks~

Yea yea, squall_kay x paham Chinese. I already ask him last night. Refer to my previous posts.

Bro shufflerz, in SG version, lag will only happen during messaging, right? As both Chinese and English input are there together. Any other places will lag in SG version compared to GW version? In my GW version, leftover RAM is around 70MB

can we change the icon of P1 menu?

its kinda boring...

i wan to changes it to iphone icons.. is it posible?

wo hu..... finally got ppl cracking the walkman v3, i follow the instruction at the first page n now i got it running! thanks man!

got one question, if i want to delete this player in the future and since i replace the files in the c drive of the phone, will i be able to recover the files by doing factory reset? or do i need to reflash my phone?

If you buy Thorus set, they won't charge you.
If AP set, I also not sure.
You can do it yourself, why need to refer back to shop?
Maybe they all also don't know what's that.
I remembered last time I went to do survey on this phone, 5 out of 10 said "what phone is that?".

Restart your computer once, and you'll get SEUS connected already.

Contact Ringtone:
Go to Contact -> More -> Edit Contact -> and on the above tab, select the music icon -> then see bottom part got Ringtone.
You can change at there.

I've compared with fx_53_tx before, nothing much different actually.
Messaging also won't laggy, as long as you know how to deal with it.
About the RAM left over, a clean SG firmware will and a clean GW firmware are almost the same.
Its between 68MB to 72MB.

Highlight the icon -> More -> Edit

Unless you got backup you those folder up, or else, you have to reflash your phone to get back the default setting.

Shufflerz...where ar u stayin.. can we meet somewhere and teach me how to flash n hack the phone.. quite tempting to get Walkman 3.0... hahahah.. then i'll treat u milo ais la... hahaha..

thanks Shufflerz...

Wow..U seems so happy to have SG version U really encourage me to flash to SG version

If wan change writing input, need to tap on the screen? cant change by pressing any key?

I'm from Penang lor.
To be exact, Butterworth lor.
Actually I'm also not a pro or whatever, I just follow every single step in the tutorial.
Sometime when I'm flashing my phone(or whatever gadget), I will still refer back to the tutorial, for safety 1st.

You're welcome.

Hold ↑ and press 0.
The thing that quite annoy me is the stroke input.
If you use my method to change input, you have to cycle between English - Pinyin - Stroke.
If you tap on the screen, it only switch between English and Pinyin.
I wish someone can find out a way to get rid of the Stroke input. ><"

This post has been edited by Shufflerz: Apr 28 2008, 12:29 PM

Huh? I read from guideline that "English - Pinyin - Stroke" is for HK version o..SG version only "English - Pinyin"

PDA software version:
CXC 162156 R6G04

Phone software version:
CXC 162037 R9K009

Bluetooth software version:
CXC 162143 R1D

CDA version:
CDA 162024/95 R10A

No need to say much, you got the point.

I've tried all the firmware myself.
For HK, you'll get Traditional Chinese(which I personally very like), instead of Simplified Chinese.
But, HK firmware suffer a worse lagging issue, so I decided to get back to SG firmware.

This post has been edited by Shufflerz: Apr 28 2008, 12:40 PM

Mine is like this:

Organizer:
CXC 162108 R6G04

Phone:
CXC 162037 R9K009

CDA:
CDA 162024/52 R8A

This 52 is from which region?

This post has been edited by uhlaw: Apr 28 2008, 12:51 PM

Indonesia lor.
Got chinese input?

No chinese input in my phone right now. I just use chinese fonts that i copied to my memory card to read chinese.

Previously i use "English" to write my pinyin and my friends keep complaining coz they cant even understand most of my "pinyin"

So, consider to flash to SG version as U have build a strong confidence in my mind that SG version also as good as GW version

But, how come mine is Indonesia... I think i am the only one here with Indonesia version