Blitz formula user here, OC e8400 4.0ghz 24/7....
Still waiting for 9 series Penryn

haha...cpu e4xxx series are bad ocers.now i know...what bout e6xxx series?

@tnhafiz : before u think of changing proc, why dont u try to look for a matching pair of RAM?it will help u a lot in OC'ing,trust me. your mobo can reach fsb of 450MHz+ easily, i've tried and tested it before this.
keep in mind that at the same clockspeed : (higher fsb X lower multiplier) is always better than (lower fsb X higher multiplier)

Anyone manage to use AFUDOS revert the motherboard into older version?

This post has been edited by ahsiah: Mar 27 2008, 07:08 AM

yeah...actually now im planning to get a pair ram.but no money....

if anyone manage to do it .. please teach me how .. hehehe
i oso wanna flash back to older version BIOS firmware laa

Mine is

Asus P5k
Core 2 duo E8200
Gigabyte 9600GT

All stock.

Something is wrong with my sensor for CPU. Always read at 0C to -4C. Updated bios also same problem so i never overclock.

Asus P5KR user here. Very satisfied with this board. Manage to OC Q6600@3.7Ghz easily. 1.52v at idle No BSOD appear until right now.Huhu.....

For 24/7 use @ 3.38Ghz succesful prime more than 12 hour. Screenshot

Stacker 832|Q6600|Asus P5KR|Gigabyte Odin Pro 550W|Thermalright Ultra 120 Extreme|Crucial Ballistix 6400 4GB Kit|MSI 8800GT 512MB|Logitech X-540|Logitech MX3200|WLCD Samsung 19"|Samsung DVDRW|

Bold=New added Hardware

This post has been edited by graphicp: Mar 27 2008, 09:16 PM

whats your load temp for the Q6600 ?? u use which software to stress test ??

its stated in the SC link, and as well as his post. what more clearer? :S



@graphicp
nice oc , cannot get it stable at 3.7?
you're using a xigmatek HDT or TRUE 120?
and room air-cond or not during the tests?

This post has been edited by bryanyeo87: Mar 28 2008, 12:51 PM

i wanted to ask for the 3.7 OC one la ... 3.4 one is there la i can see

Im very care about temp. Thats why all my test consists of two different torture test software. Always use TAT and Prime95. I like to take my temp reading when cpu is fully stresses by prime95. 12hour prime, highest cpu temp is 63. The average is 57 using Core temp and CPUID. Load vcore 1.352v.

My room very hot because facing the sunshine and no aircond. And the time i stress my system was start at 11.30pm. Good time to stress system at this condition. hot day, hot room, hot cpu........I believe when stressing my system at full night my temp reading will decrease around 3'C, because that time temp around u usually drop significantly.

For information, running my quad@3.7 , idle 47'C, fully load at 70'C. Quite hot due to 1.52v CPU-Z reading.

---

Added on March 28, 2008, 1:22 pmBro, i cant say stable at 3.7 becoz for me stable means stable under stress test more than 8 hours. But me fail after 4hours ++ 1 of my core was fail. , Im using TRUE 120, no aircond at my room, very hot room becoz facing sunshine.

Screenshot Q6600@3.7Ghz

This post has been edited by graphicp: Mar 28 2008, 01:36 PM

Have u try EZFlash from bios.?
I tried b4..i think use the bios ezflash to flash back old one

I will set up my floppy drive for this revert back. Before that, I will post my result for Super PI and 3dmark06.

oo an asus mobo thread i wanna ask all the sifus here im planning to get an overclockable mobo bt since there's a few brand and 1 is asus im wondering which mobo is good for overclock i wan got hd audio and also integrated vga wan n im using amd 4200 btw hmm?

well i have a asus engineering afudos here somewhere in my hdd

it was to flash back the rampage formula bios on the maximus
back to the original maximus formula.

What's wrong with the current BIOS?

sishh.. a silly question aint it..

chill man, newbie marr
give chance

@`my` usually 1st release of BIOS, it will have unfixed bugs or compatibility issues with latest hardware etc. thats Y new BIOS will available to fix the pr0b

bro.. why didn't insert asus p5e? it's also a good mobo for oc