Czone got TX2 i think....

this cooler is good coz it enough to cold down my 1.45Vcore on 3800 F2 in 2.8Ghz...

i cannot close my casing since i bought this thing

the price is..?

haha, that's my concern too, it's too tall to fit into my poor mid-tower

btw, anyone using Xigmatek HDT-SD964, wonder can it tame Q6600?


Below are the review, one good one poor
Good Comment

Poor comment

@sotong168
i'm using it for my E6700.... bought at Robyncom for RM120...

at idle, no matter the fan speed its almost at ambient temp of 28-30C...
(my room's air cond is busted at the moment so cant test at air conditioned ambient temp)
on load, max temp is 45C, compared to my Hyper TX which was 65C..
and this is with the supplied TIM, since its temporary didnt bother to waste my limited supply of MX1.
ridiculously good cooler, comparable temps with a friend's WC system..

plan to lap it, then use it on the Quad Xeon + p45 combo later..

fan is rather noisy at max speed tho its quite audible, at least compared to the dead silent Hyper TX
i picked this over the 120mm variants simply because those will definately not allow me to close my casing door...

@pikacu
don remember the exact price.... it was a few months back.. sorry bro
i only remember that it was cheaper than the MX2 i bought from them @ RM40

This post has been edited by 00007kel: Jun 3 2008, 12:43 PM

@00007kel

eh..post some screenies oso la... this thread so long no temp SS already

sure ^^

E6700 @ 3.00Ghz @ HDT-S964 with supplied TIM

Load temp on both max fanspeed and min fanspeed. 4C difference only... come to think of it not worth the noise increase
(its raining now, so its probably as close as air cond temp as i can get )

1st time doing temp screenie so correct me if its wrong.. newb hehe..

This post has been edited by 00007kel: Jun 3 2008, 07:50 PM


Attached thumbnail(s)

imo its normal for me as fan speed doesnt affect much. btw, i think u should stress a lil longer. maybe around 15min but from i see, ur result are quite good too.

here they are.. yeap the temps are abit higher at 48C max fan and 52C min fan...
same thing.. 4C difference..

This post has been edited by 00007kel: Jun 3 2008, 08:22 PM


Attached thumbnail(s)

hey, are u using the stock fan? s964 stock fan can go till 3000rpm one ka?

btw, it will be nicer if u can host ur image thru imageshack or photobucket

yep using the stock fan @ 3000rpm
any other 92mm fans to recommend tho? this one is awfully noisy at max RPM..

This post has been edited by 00007kel: Jun 3 2008, 09:13 PM

Went to C-Zone last week to buy TX2 but they're selling it too expensive @ RM25....so went down to Imbi Plaza instead and bought it @ RM18...

erm..try vizo or nucleartec lo... but not really powerful fans... if u wan power u have to go find bro AllnGAp

our forummer here oso got sell what

u are using stock tim right...

maybe u should try out other tim like mx-2, artic silver 5 or bang for bucks tx2

coz i think ur temp is a lil high but still acceptable la

hey bro , which forumer selling this ?
I mean trustable one ... hehe

Seems like only 1-2 person selling only too bad.

I want buy one for myself and my friend want 1 unit too !

yah the stock tim is sucky...
yep as i said will use proper tim on my new xeon quad + p45 rig...
will use MX1... got limited amount... wanna save


try rockrock...

now TIM so cheap.

last time i compare stock tim and tx-2, there is like 10c difference. lagi its only RM18, so i dont think its very expensive

ohh..from sabah is it?
if u want me buy for u,pm me..
im going to kota kinabalu this saturday
cuti2 malaysia ,visit my brother who working there actually

that guy seems like very busy ...
he work at imbi plaza isit ?
trustable ?

kke... not so fast lah bro