Xigmatek HDT-s1283 Red Scorpion Review



Official Website Link : Click Here

Xigmatek S1284 Achilles Review: Click Here

If interested to any of the Xigmatek Product?? Go to Prodigius's thread: Click Here

This is my first time doing this so i hope it is acceptable. The picture is just taken by a cheap N70ME hand phone, so please
bear with me if there are some picture of low quality. This mini review will be done step by step and will keep on updating including
some benches. Comments, pictures, screenshots are totally welcomed.

================================================================================
Content

1. Overview / Features / Specifications / Application
2. Differences Between Plain Vanilla Xigmatek s1283 VS s1283 Red-Scorpion
3. Packaging
4. Spring & Screw Kit Accessories
5. Test bed
6. Fixing
7. Temperature
8. Graphs
9. Conclusion

================================================================================
1. Overview / Features / Specifications / Application









================================================================================
2. Differences Between Plain Vanilla Xigmatek s1283 vs s1283 Red-Scorpion [updated 17th March '08]

There is some confusion in this part since xigmatek website spec and the product box spec have different value, i've include both of them inside.
Hope it wont confuse u all.

NOTE: There isn't any big difference between old s1283 VS Red Scorpion Heatsink, The Nickel coated heatpipe in red scorpion is merely for cosmetic
purpose, the only difference between both product is the fan itself. Hence the performance for both heatsink is totally EQUAL / SAME.

1. HEATPIPE ---- [No coat heatpipe] VS [Nickel coated heatpipe]

2. LED ---- [Plain Black Fan] VS [4 White LEDs Fan]

3. LIFESPAN ---- [40,000 hrs] VS [50,000 hrs]

4. AIRFLOW ---- [56.3 cfm] VS [61.3 cfm] <------ from website --- but from box, both are same at [72.1~99.6 cfm]

5. AIR PRESSURE ---- [1.516 mmH2O] VS [1.57 mmH2O] <------ from website --- but from box, both are same at [2.4~4.8mmH2O]

6. NOISE LEVEL ---- [20.6 dBA] VS [27.2 dBA] <------ from website --- but from box, both are [20~32 dBA] VS [18~28 dBA] respectively

7. FAN SPEED ---- Both [800~1500 rpm]<------ from website --- but from box, both are [1000~2200 rpm] VS [800~1500 rpm] respectively



================================================================================
3. Packaging

The size of the box is the same with the old Xigmatek s-1283, which the only difference is the very cool looking with reddish color
with a scorpion on it. On the back of the box is the SPECIFICATION of the Red-scorpion and one of the side is the APPLICATION which
also means types of sockets supported while the another sides is with 3 cool looking pictures showing Heatpipe-Direct-Touch (H.D.T),
the new stylist 4 white LEDs 120mm Fan of transparent black with Amber color fins and lastly the picture of the heatsink fins with
radiating fins.

Box (Front)



Box (Both Sides)



This post has been edited by vincentlaw: Jul 31 2008, 05:03 PM

Box (Back)



Inside the Box we have the gigantic heatsink, stylist fan and a bag of accessories. The heatsink is made up of 3x u-shape Heatpipes,
with the base is heatpipe expose to the processor(H.D.T) and made up of 54 tiny fins. Xigmatek has combined the efficient design
of three exposed copper heatpipes with an extremely durable (and quiet) 4-white-LEDs 120mm fan in their newly released HDT-S1283
Red-Scorpion.

Comparing both old S1283 and s1283 Red-Scorpion with the specification, this new Red-Scorpion fan have better specs interms
of Airflow, Life Expectance and Noise Level. The Life Expectance is 50,000 hrs which is amazingly 10,000 hrs longer compared to
the predecessor s1283. The fanspeed is rated at 1000-2100rpm for the old while the new 1 have lower rpm which is only 800-1500rpm.
Due to its lower fanspeed, the noise level is lower too which is [18~28 dBA] only, an improvement from [20~32 dBA]. There is
confusion for the specs from Xigmatek official website and box specification for the airflow. The box stated both of them have the
same airflow which is [72.1~99.6 cfm] while the website have both different value. Wondering which is the correct one. Anyway
its still a great improvement for the fan.

Heatsink + Fan



Manual



Heatsink

Xigmatek uses 100% copper in their 8mm heatpipes here which is the same as the old s1283, which tremendously improve
the evaporation and condensation cycle in the HDT-S1283 Red Scorpion. This time the coated the all the heatpipes with nickel
except the base, which it mustn't be do so.



Looking from the top down, we can see how Xigmatek have added small dimples in the aluminum fins for the spoiler to attach to.
The heatpipes are positioned towards the outer edge of the cooling fins, directly in the path of the highest airflow from the fan.

As the heatpipes extend upwards, multiple layers of "fins" are attached. The heatpipes transfer the heat into the much thinner fins,
and then the air blown by the fan takes the heat from the fins.

Fan



Heatsink Base

The usable area of the Xigmatek HDT-S1283's base is 42x35mm in size. the three 8mm diameter copper heatpipes have been swaged
into the aluminum base block, and each surface made flush by a light sanding.



Accessories Included

Same as the old s1283, the Red Scorpion ships with brackets for LGA775 and AMD K8 processors (754/939/940/AM2 respectively).
The Intel socket 775 clips use the standard push-to-lock plastic clips that insert into the four motherboard holes around the
processor socket. AMD Athlon64 processors on 754/939/940/AM2/AM2+ work with a modified spring clip that attaches to the
lugs on the AMD heatsink retention frame. A cam lever at one end of the clip applies pressure to the heatsink base directly.
The AMD clip is tool free, but the metal is thin and tends to bend towards one side or another after clamping pressure is applied.
3-pin to Molex converter, high performance thermal compound, 2-screws and a radiating fin.



This post has been edited by vincentlaw: Mar 29 2008, 03:05 AM

Fan + heatsink Combine (Front + Side + 45' View)

When it combine with the stylist fan, it looks very attractive as it will almost attract everyone from getting
it. Below are some different viewing angle when it is combine. Attractive isn't it?





Front Side of Fan (Dark Room)



Fan + heatsink Combine + Power On

The Fan speed is a little different from the old s1283 blackish fan which have 1000-2000RPM, this new fan
is spinning at minimum 750RPM to a maximum of 1,500RPM. Amazingly the fan didn't make much noise at
its maximum speed or at least u wont be hearing anything from 1 meter away from the casing with the side
panel closed.



================================================================================
4. Spring & Screw Kit

NOTE: Please take note that this SS Kit is sold separately...



(Socket 775's enhance kit, it can protect your motherboard from getting bend, provides secure installation
and increase the cooling performance too, from 1-3'C)

================================================================================
5. Test Bed

Software
Windows Vista Ultimate Edition
Everest Ultimate Edition 4.10.1126
CoreTemp 0.97.1 (LINK)
CPU-Z 1.42 (LINK)
PRIME95 v25.6 Build 6 (LINK)

Hardware
HSF = Intel Stock Fan(E6750) & Xigmatek s1283 Red-Scorpion
Processor = Intel Core 2 Duo E6750 2.66ghz 1333FSB 4mb L2-cache G0-Stepping
Motherboard = Gigabyte P35-DS3 (Rev1.0)
Memory = 4x 1gb Kingston Value Ram DDR2-800mhz
Graphic Card = Asus 8800GT TOP Edition 512mb (700/1750/2000)
Power Supply = Silverstone Strider ST56F 560W
Casing = Cooler Master CM690 With 5x 120mm Silent/LED Fan
[1x Front-Bottom(Intake), 1x Bottom(Intake), 1x Back(Exhaust), 1x Top(Exhaust), 1x Side Panel(Intake)]

Thermal Compound = Artic Cooler MX-2 High Performance Thermal Compound

NOTE: Test is done with EIST, C1E, TM2 and virtualization turning OFF for LOAD bench



================================================================================

This post has been edited by vincentlaw: Mar 29 2008, 03:06 AM

================================================================================
6. Fixing

Spring & Screw Kit (sold separately) is easily installed onto the base of the heatsink with 2 screw provided. Thermal paste AC MX-2 is applied with
a line across the 3 heatpipes at in the picture below to achieve a better performance. Its just to make sure all 3 heatpipes is contact
with the processor with the compound in between.



The Red-Scorpion have no problem with Gigabyte P35-DS3... no chance of touching the northbridge HS at all



Complete Red-Scorpion is installed on the test bed. It looks gigantic isn't it? Yes it is. But who cares as if it performs well.
Below are some pictures taken from difference angle of it.





The whole system is pllaced into the casing. I have a bit difficulty on plug in the 3.3v power into the mobo when it is inside the
casing due to the Red-Scorpion have a gigantic size and my top fan too which makes the whole upper area becoming very small.
But no worries as the socket is not blocked at all.



Side Panel closed. The Red-Scorpion is Gigantic as mention alot of times earlier. It is just enough for the CM690 Casing side panel
to close it and leaving not much space between the top of the heatsink and the side panel. For those who small casing or any CM690
casing with fan directly onto the processor... you wont have enough space to close the side panel if u have a fan there.

This post has been edited by vincentlaw: Mar 29 2008, 03:08 AM

================================================================================
7. Temperature

(Screenshots already reduced to 75% for better view in smaller screen)

Red-Scorpion + 2.66ghz.... IDLE....... (Stock Vcore[1.325v] + Stock FSB/MCH voltage) = 31'c



Red-Scorpion + 3.0ghz.... IDLE....... (Stock Vcore[1.325v] + Stock FSB/MCH voltage) = 31'c



Intel Stock Fan + 3.0ghz.... IDLE....... (Stock Vcore[1.325v] + Stock FSB/MCH voltage) = 36'c



Red-Scorpion + 2.66ghz.... LOAD....... (Stock Vcore[1.325v] + Stock FSB/MCH voltage) = 52'c



Intel Stock Fan + 3.0ghz.... LOAD....... (Stock Vcore[1.325v] + Stock FSB/MCH voltage) = 65'c



Red-Scorpion + 3.0ghz.... LOAD....... (Stock Vcore[1.325v] + Stock FSB/MCH voltage) = 54'c



Red-Scorpion + 3.2ghz.... LOAD....... (Stock Vcore[1.325v] + Stock FSB/MCH voltage) = 56'c



Red-Scorpion + 3.4ghz.... LOAD....... (Vcore set to 1.375v + FSB/MCH set to +0.1v) 59'c



Red-Scorpion + 3.6ghz.... LOAD....... (Vcore set to 1.400v + FSB/MCH set to +0.1v) = 61'c



================================================================================
8. Graphs




================================================================================
9. Conclusion

The Xigmatek HDT-S1283 Red-Scorpion is a massive cooler with just as big 8 mm heat pipes. The great upside of such a large
heatsink is the use of a large fan, which does significantly decrease the noise level and it does manage to cool the CPU well. So
if you are looking for a quiet alternative to that stock cooler, the very well built Red-Scorpion is a good choice as it will also cool
the surrounding components.

The Fan was extremely quite. Cant hear anything from 1 meter away with side panel closed even at its full speed which is 1,500rpm.
This Red-Scorpion is amazing as it still cooler at 3.6ghz with Xigmatek VS 3.0ghz with Intel stock fan which is 61'c and 65'c respectively.
Predict and estimate it can bear E6750 overclocked till around 3.8ghz. Really a recommended cooler which have an amazing price/performance.
There is no comparison between the old plain vanilla s1283 with this Red Scorpion for now. Hope we will see one somewhere soon. Its
even better when C1E, EIST, TM2 is activated..... at 3.6ghz with all thermal features activated... it idle at 37'c which I'm using it as my
default clockspeed now. It is incredibly AMAZING!!!!!

Pros
- HDT design
- Quality
- Very quiet fan compared
- Compatibility with motherboard
- Replaceable fan
- PWM fan
- Great value/performance

Cons
- LED Fan is not as bright, attractive, and nice as in advertise picture
- Will not fit in all cases - height.
- No External Fan Controller (not so important)
- Confusing for specification from website VS product box

This post has been edited by vincentlaw: Apr 19 2008, 07:39 PM

how much is the damage?

RM209 from ckhoong.

http://forum.lowyat.net/topic/483850/+860

xigmatek red scorpion user reporting in!

man.. this cooler is powderful... the cpu temp(not core temp) dropped from 68 to 44 on load @1.3v 475x8=3.8ghz on my e8400 compared to intel stock HSF


here's some screenies for red scorpion on load in aircond room.... no screenies for intel HSF available cos lazy want to fit it back to test but i still remember clearly the temp is around 68 on the same clock





This post has been edited by tkh_1001: Mar 16 2008, 12:48 PM

any chance to compare how much improvement from normal version to this?

oh my god... i was looking this HDT S1283 non Scorpion before, seems like no1 bulk it....

keke...now ada dah....
saving money for E8400

performance nice or not? or the previous one btter? lol

U can easily reach 4GHz what...

any comparison between the old n this red scorpion in term of the temperature

sry i cant carry out old VS new s1283 coz i dont have the old 1.... i'll be comparing stock intel VS redscorpion...

yup..that was just the test clock i use on stock HSF to compare with red scorpion... stock HSF cant be used to compare if use 4ghz... the temp is too high

This post has been edited by tkh_1001: Mar 16 2008, 11:26 AM

another red scorpion coming in.... i got to tell u that this thing is magnificent... my e6550 temp drop like hell more than 20 degrees...

stock HSF
load=70 degrees (max)
idle=40-45 degrees

Xigmatek Red Scorpion S-1283
load=50 (max)
idle=30-35

i can conclude that it is the best cooler i ever seen so far... the HDT is just so good and the scorpion keeps poisoning my e6550 to cool down...

some pics for u guys.... pm ckhoong if u r interested...




the old version has lower cfm, lesser life span, sound level are higher..... other than that everything are the same except for the colours...



EDIT: sorry bout the post... just too excited bout the cooler...

This post has been edited by ham_revilo: Mar 16 2008, 05:16 AM

he mean benchies..... as the theoritical differences already mention in section 2........

my fault then... sorry ya...

but just want to let u guys know the diff...

hehe no worries.....

wow man the cooler can reduce to 20 deg that should be amazing cooler