me also waiting for my xigmatek S1283
bro vincentlaw need ur permision to post some s.shot here later

my Xigmatek s1283 just arrive today..but not the red Red-Scorpion one..
this is the previous xigmatek s1283..
very happy cause it perform better than my stock intel cooler..(sure everyone know bout this la)..

previous setup with stock cooler
O`c test result : max temp- around 65`c

after change to this xigmatek s1283
and the result



sorry..only short test..

ya..in aircond room..
if without aircond turn on..the temp r around 57-59c max

yesterday night i make test again
start at 11.58pm,i leave my pc and go baring² but suddenly i fall asleep

ok the result different as b4..where my temp is around 55c(aircon on) on my previous test
and here the new one

1st test:


2nd test:


after this i`ll test without aircon and see hows the temperature..
but its not fair cause maybe next time i ady change the tim inside..
currently using capkucing t. compound..

This post has been edited by fesick: Mar 22 2008, 06:59 AM

ram?u can see from my 1st test..
i use c.ballistix 2x2ram
vcore 1.35 on bios then it drop on load..

take picture let us see inside ur case..

dont know what to say..
even a quad processor i never test yet..
anyway guys,hve u see anyone sell the smallrubber thingy?
the one that we use to hold-up the fan..lazy to do by own..

ya..thats the 1st try..
but the 2nd test much lower..the temp around 49c
but its on aircond temp..still waiting if got time will do it iwif room temp..

This post has been edited by fesick: Mar 26 2008, 03:57 PM

ya..i test ady,mine can do 500fsb but yet stable..

its default multiplier in e6550..

@maxz663
your fan speed run at fullspeed?

edited

This post has been edited by fesick: Mar 27 2008, 04:41 PM

try look for fan control in your bios..try disable it

just disable the cpu smart fan control

aah ah how much drop ah u guys?
mine before running with stock intel hsf at 3.3ghz wif 1.35 vcore = around 53-55c
with xigmatek drop to 43-45c (on load)

thats why i hate to use push pin..b4 this i also use push pin..
i`ll takeout my mobo first then only do the installation so u can see from the back if it install properly..


This post has been edited by fesick: Mar 28 2008, 05:59 PM

3.6ghz edi ok what..
if 4ghz u havnt push switch on button your cpu fly edi~
joke joke


This post has been edited by fesick: Mar 30 2008, 09:14 PM

magna_voxx ,what mobo u use anyway?

try find smart fan control in ur bios,then disable it

my fan wont go higher than 1400rpm..haha,but its ok

hahaa..i dont know..later i check it back..