same setting as fesick, vcore=1.35v and fesick temp was way below (48c)


but i manage to go further and temp also look the same only

This post has been edited by ham_revilo: Mar 26 2008, 11:25 AM

bro... did u just came back from the future ? look at the cpu-z core speed!

anyways..fesick's temp is around 55c with normal s1283 la @ aircond room iinm... seems like red scropion n the old ones not much difference

ya..thats the 1st try..
but the 2nd test much lower..the temp around 49c
but its on aircond temp..still waiting if got time will do it iwif room temp..

This post has been edited by fesick: Mar 26 2008, 03:57 PM

damn revilo did u just pump a trainer to boost ur cpu speed to that amount hahahaha..........

bout that... the cpu-z sometimes goes crazy and i also didnt notice when i took the screen shot...
but the actual speed should be 480x7....



i think with that low temp u can go for higher fsb... anyway 495x7 is the max for me... maybe due to my ram...



no trainer la... just xigmatek only...

This post has been edited by ham_revilo: Mar 26 2008, 07:26 PM

ya..i test ady,mine can do 500fsb but yet stable..

why r u guys using multiple of 7? much nicer kaa?

nope la... e6550 on have highest multi of 7... unlike ur q6600 have multi until have multi until 9

its default multiplier in e6550..

oic luper lak korunk guna proc lain hahahha....

so when is ur 4.0ghz coming?

hahah want to see kaa.....will try do this weekend as more free time at those days

e6550 all this while is known for high oc ability but the multiplier is too low so those who like oc kaw kaw wont go for it....
too bad my ram cannot tahan... or not i bet can go higher than 495x7...


@fesick
i also can seem to get it stable at 500mhz.. keep bsod when testing...

that will be an insane overclocking.... 66.6% overclocking...

actually that could be mobo limitation too right? but 495 @ stock vcore very good edi la... my proc langsung nonit to dream reaching even 410 on stock vcore

mobo could be the issue as very few board can go above 500mhz... but i think ds3 can do better than that....
anyways most e8xxx has difficulties reaching more than 4.0ghz... so if u could reach 4.0ghz is really good edi...

E8xxx series has difficulties??? i tot they ez go beyong that especially E8400...

afaik not all 8400 can do that... the very first batch can do that but still rare... 3.6 for 8400 is peanut but go higher or reaching 4.0 may be a problem for some...

why???.....

that i really dont know... maybe intel made it to be like that