what do you guys think will it bring much difference if i change from my current thermaltake v1 to the xigmatek red scorpion?

oso got the red scorpion at 2pm just now COD with ckhoong.....

well it cant go that low below ambient temp lorr vincent for air cooling.......unless ur room aircond can do 0 celcius than only its possible if im not mistken, (which would make u an ice cube already hahahhaa)

wow thats good to hear eoma......havent got the time to crack open my rig yet to install the scorpion....

where r going to sukhoi?

will try to post some test result when i put it in the rig this sunday perhaps......

waiting for my new rams to arrive before dismantling everything........

ur real temp is oso showing a 5C difference in the TjMax xeno

yaa lorr....u bettter go and book. its depleting like like pizza on a pizza plate......

anyway care to explain whats the use of the fin? should i use it or not

ive just dimantled my whole pc damn there lots of junk in there..............hahaha now adding more junk in it hahaha.....

This post has been edited by ir1z: Mar 23 2008, 04:13 PM

hahha OCed my Q6600 @ 3.6Ghz using vcore at 1.525v getting full load (use OCCT) max temp at 76C compared to last time 90C very good indeed.........will try post some pics later

This post has been edited by ir1z: Mar 23 2008, 10:04 PM

hahaha dont worry thats when it is at full load.....when on earth do you ever use ur pc to full 4 cores at 100% as i dont do folding by the way

im currently running on a daily basis start now at 3.6Ghz using vcore 1.5v temp at idle is core 1-4 = 44C cpu showing 31C........

manage to get stable at 1.5vcore now at load down to 70C max

This post has been edited by ir1z: Mar 23 2008, 11:19 PM

another succesful test result hahahha

using same 3.6 succesful with 1.475 vcore and 1.45v nb, my instability before this must have been due to my RAMS

got this result


This post has been edited by ir1z: Mar 24 2008, 12:09 AM

hahha next time see lorrr..... i didnt put coz already available at the everest the RAM timings.

as for core tempt it shows the same temp as everst almost identical every time. so decide not to put it on. But i can tell u i have a vid of 1.3

p/s: i am in a air-conditioned room with temp at 23C on the remote but doubt it is accurate as my room has lots of holes on the top going out to the house balcony ( meaning it would be hotter than that )

might even be able to push this up a notch to 4.0Ghz maybe next try

some pics for u guys:


This post has been edited by ir1z: Mar 24 2008, 01:28 AM

my temp readings are not at 23C lorr vincent.......i state that is the celcius setting on my air cond. heheh u must have just miss read it. No harm done.

My full load setting is getting reading at 61-62C max. Idling at 35C

do you mean that "at that sort of speed" on 3.6 or 4.0 Ghz as mine at 3.6 dont even reach 70C if 4.0Ghz should easily reach that though

r u using the same q6600 bryan? i have set mine at 1.475vcore getting idle 35C-38C load 61-65C this is on air yaa using the red scorpion..........
will push the proc more but not now.wait the thermal paste fully settle down another day or two.

p/s: havent dont the pencil mod yet. Will do that oso nanti. current vid at 1.300v

This post has been edited by ir1z: Mar 24 2008, 09:57 PM

u mean rite now ur HSF+fan are facing downwards is it? and not towards the rear? and another thing, u would be better off with current market thermal paste not the one they give in the box. Just my opinion though...

it would be a better idea to put them facing the rear fan like what vincent and most of us others here do....

waaa tak dan nak habih pueh pakai lagik yg scorpion nie dah ader yg lagik baru erk....

hmm seems would be not and advantage for intel quad core to be used with a 4 HDT