yeap.... if going for OC, should be good for the fin to direct some air flow towards ur mobo chip located near PROC... =P

pls post some pics to show off its poison...

some screen shot on its performance too will be better...

you mean the spoiler right?
it's useful for hot mosfet on some mobos like my abit IP35E and IX38 QuadGT.
the temperature passive heatsink can reach 110C very easily during load.

This post has been edited by sukhoi37: Mar 23 2008, 09:11 PM

110c ? above boiling point ? I think you need to recheck your figures.

hahha OCed my Q6600 @ 3.6Ghz using vcore at 1.525v getting full load (use OCCT) max temp at 76C compared to last time 90C very good indeed.........will try post some pics later

This post has been edited by ir1z: Mar 23 2008, 10:04 PM

wat the... are u craZ to go 90'C or 76'c?? 90'c shud be in dead zone while 76'c in danger zone.... shud avoid that.. unless u plan to get new proc

hahaha dont worry thats when it is at full load.....when on earth do you ever use ur pc to full 4 cores at 100% as i dont do folding by the way

im currently running on a daily basis start now at 3.6Ghz using vcore 1.5v temp at idle is core 1-4 = 44C cpu showing 31C........

manage to get stable at 1.5vcore now at load down to 70C max

This post has been edited by ir1z: Mar 23 2008, 11:19 PM

bro, it's not only me got this figure.
i've seen other users got the same figure as well. (http://www.clunk.org.uk/forums/reviews/861-abit-ix38-quad-gt-living-review-ii.html)

another succesful test result hahahha

using same 3.6 succesful with 1.475 vcore and 1.45v nb, my instability before this must have been due to my RAMS

got this result


This post has been edited by ir1z: Mar 24 2008, 12:09 AM

in one of the CPU-Z.. u shud shown memory tab instead of SPD tab... >_<".... that doesnt really prove anythg bout the memory timing u use... its okay since the Everest OSD already show
all..

hmm very nice temp.... show with coretemp also next time

This post has been edited by vincentlaw: Mar 24 2008, 12:30 AM

hahha next time see lorrr..... i didnt put coz already available at the everest the RAM timings.

as for core tempt it shows the same temp as everst almost identical every time. so decide not to put it on. But i can tell u i have a vid of 1.3

p/s: i am in a air-conditioned room with temp at 23C on the remote but doubt it is accurate as my room has lots of holes on the top going out to the house balcony ( meaning it would be hotter than that )

might even be able to push this up a notch to 4.0Ghz maybe next try

some pics for u guys:


This post has been edited by ir1z: Mar 24 2008, 01:28 AM

I can see your old thermaltake lying down there retiring.
Please update if you manage to push it all the way to 4.0GHz.

wat is the price for tis cooler and where to get it ?

i wonder, what is the performance difference between red scorpion and the s1283, since that they are both practically the same thing, with the exception of a higher rated cfm fan?

but afaik, the s1283 performance does not scale that well, probably 1~3c improvements on load when i strap on a 180cfm nmb screamer :S

U can get all the infomation u want through this link :

http://forum.lowyat.net/topic/483850

still acceptable for holes at the top since hot air rises and cool air falls so basically the hot air will flow out from ur room.. but yes it wont be as cold as sealed room with aircon.... but i guess with some holes on top for airflow is better too coz fresh air coming in..

really nice temp there... 23'c.. how i wish i can get that..... how about full load?... pushing Q6600 to 4ghz is too extreme since the voltage for even 3.6 is in danger zone already...

im sry this post really out of topic... forgive me

This post has been edited by vincentlaw: Mar 24 2008, 05:07 PM

my temp readings are not at 23C lorr vincent.......i state that is the celcius setting on my air cond. heheh u must have just miss read it. No harm done.

My full load setting is getting reading at 61-62C max. Idling at 35C

ohya misread it... 23'c is for aircon temp.. haha i tot proc temp...
dont go too far already la... the voltage will kill ur proc...

temps would probably hit the high 70's if not low 70's at that sort of speed

my quad at 3.8ghz 1.45v is already spewing 66c on water using prime, ambient is 33c, and reservoir temps is 40c

so what say on air?



@ir1z
intel warranties their q6600 up to 1.5v, so go have fun

This post has been edited by bryanyeo87: Mar 24 2008, 07:47 PM

do you mean that "at that sort of speed" on 3.6 or 4.0 Ghz as mine at 3.6 dont even reach 70C if 4.0Ghz should easily reach that though

r u using the same q6600 bryan? i have set mine at 1.475vcore getting idle 35C-38C load 61-65C this is on air yaa using the red scorpion..........
will push the proc more but not now.wait the thermal paste fully settle down another day or two.

p/s: havent dont the pencil mod yet. Will do that oso nanti. current vid at 1.300v

This post has been edited by ir1z: Mar 24 2008, 09:57 PM