joestar, you should be doing 17.5 seconds with 3.4Ghz, and i am using team value too. U dont need crucial rams for such things. Let me post my SP1m.

i did joestars 18.6seconds with just team value rams and also not to mention just 3.2Ghz

the speed is just 2400Mhz coz of EIST and C1E



This post has been edited by a1098113: Mar 21 2008, 03:16 PM

SuperPI @ tight timing + higher CPU clock total pawnage

i remember the old days when i'm on DDR 700, while some at DDR 500 IIANM, but mine @3-4-4-8, while him... extremely tight, it's not 2-2-2-5, it's way tighter than that and some figure was at 0 value...

well, that's the old days, currently i'm on 2x1GB + 1x1GB (3 RAM Modules) with loose timing (5-5-5-15) @DDR2 800MHz, also Kingston KVR + Aeneon..., not badla for crappy chipset available

overclocking isn't entirely about luck... it's about get the most potential possibility of your (whatever) processor, RAM and GPU you have at the moment...

Updated.......played with my ram and this time shutoff all unecessary processes



@a1098113
Quite close to you ady
Btw since you also hv team value i wanna ask u, currently i am having a problem booting above 850mhz even at 5-5-5-15. Strange thing is i can boot fine at 850mhz with 4-4-4-11 Any ideas?? I'm ald overvolting it to 2.2v. Lastime with my amd system the ram nvr used to be stable above 900mhz.

EDIT: just realized the screenshot i took doesnt show the ram speed Anyway it is at 426(852mhz) with 4-4-4-12-2T

EDIT2: suddenly I'm booting above 850mhz. Weird More testing to come

This post has been edited by joe_star: Mar 21 2008, 06:05 PM

I just realized that there's a huge voltage increasing to run 3Ghz to 3.2Ghz for a E2 series.

This post has been edited by ocz: Mar 21 2008, 07:09 PM

you got a good point there.

which 1 u mean?...
if u mean de rx1250...dun...haha
it sux...it gave me black screen le...now de com can start...jus no display...dunno y?...
can help?...
it jus black out when i restarted the com as vista update need restart...
setting of OC is 333*10 vcore = 1.368v, nb =1.8++ cant recall
yes...i think de e2200 is quite promising too...
it can go on stock vcore till 3.1Ghz...jus de board 'mmm zang hei'<--cantonese

ok...so i'm now officially looking for new board...
pls recommend me a goo matx board..
jus wanna ask is g35 similar to p35?...except for the IGP..
how bout g33?...oc good?...1333mhz strap right?
sorry for these question as my com wont start n i dun hav much connection currently to do some rnd...
hope all sifu help me...

yeah coz of the native strap and the voltage needed would be at a non linear rate.

---

Added on March 21, 2008, 8:19 pmwhats your fsb:dram ratio for this? is it at default? i play at 4:5 or 2:3 i think.. Ratios can often give varied results.

---

Added on March 21, 2008, 8:21 pmi realise from all my experience that once u have IGP on your board, ur just asking for trouble.. thats why performance boards that i see dont come with IGP, i am not too sure... i am looking at the IGP option, but...

This post has been edited by a1098113: Mar 21 2008, 08:21 PM

but matx dun come with non-IGP boards right?..
see how lo...if worst come worse then i might jus sell of de sugio for a full atx board
haiz...i reali like the sugio...compact but good stuff..

currently these two boards on my mind to squeeze every bit of my e2200 n ocz..
1. P5E-VM SE <--G35 chipset, LYP selling de HDMI version and it cost like 600+like so i better go for mars right?...haha
2. GA-G33M-DS2R <---G33 chipset, dunno how this perform...

---

Added on March 21, 2008, 9:19 pmyes...my board seem no prob...
now everything is ok le?...o.O...weird hor...
haha...guess matx aint such a good idea for OC...

bout performance board with IGP...
de old nforce2 maybe?...haha

This post has been edited by razr_sped: Mar 21 2008, 09:19 PM

i am really curious about the abit fatality... i wanna see how hard you can actually push the fella, as it is rated as one of the best Matx boards there is.

i had a hard time pushing it over 350mhz...
stability is another prob..as stated by others, the board fail at the 9th hour of orthos..even on stock
u wan?...thinking of selling it...maybe...haha

so now i'm researching for a full atx board le...
no $$ to buys mars..so m considering foxconn p35a
as it can cf..although 16x/4x...but similar price to ip35 le
any comments?

back to the same thing lor if u r interested in ip35e./// i might be interested in your board... but at the moment i want either the 965/975 board/

at the moment ip35 is in my list...as its a proven performer
but i might wanna cf later...so thinking of the p35a...
now still gathering info on it

Whats the speed for E2160 at stock for SuperPI?

bro its a hanging q.... what speed at sp??

hmmm......realized smth. Above FSB380 any other multi except 9 is useless. Comp wont boot. Any ideas? I am using bios 15.

32s~33s with 1.8Ghz(EIST, C1E disabled) with RAMs at 800mhz 3-3-3-8.

joe_star, might to explain more ? higher multi or lower 1 ?? may be u could try to adjust DQ calibration (this is gor DFI, other got some other names)

btw just a question is is normal that everest report cpu temp is higher compare to cpu core temp?? got this weird reading from my e2220...

Haha....sorry..
Yeah i mean the speed for super PI.

Same with AMD X2 3800 2.01Ghz.

everest might be better for reading temps of allendale processors. In core temps, the T-JUnction for this type of processors are 85 degrees centigrade, this means that you will have to remeasure the temps in relevance to the Tjunction= 100 degrees centigrade... I am not sure how many degrees you would have to add to get that.. everest follows the Tjunction = 100. This is what i read from core temps.. it might be true..

gonna o LYP today to RMA my mobo...
somthng wrong with my mobo...multi lock @ 9 and now it doesnt boot at all...