Could I have the contact, my contractor quote me RM2.50 without downlight opening. what about the price for LBox-light through?

---

Added on May 25, 2012, 9:31 amcan i just install L Box without doing the flat ceiling in middle? coz my ceiling is just 9 feet and I plan to install ceiling fan, I dont want to lower down my ceiling...

---

Added on May 25, 2012, 9:33 amCan I have the contact? Thanks

This post has been edited by Olivia1988: May 25 2012, 09:33 AM

hi wai teong,

u charge $50 for cut 1 downlight hole.. is i correct say ah?
i is tink is a bit expensive lo..

Hi friends.. need your advice on cost incurred to install flat plaster ceiling..
Area is 9ft x 11ft and 8ft x 8ft...

Your reply is much appreciates..

163sf x RM2.50(estimated) = 407.50 ++

downlight hole RM3 to RM5 or free depend on your negotiation skill...

in klang

a sabahan for rm2.4, 19ft near to 20ft he count it as 19ft

a chinese for rm2.3, but he count it as 20ft

in total almost the same but in the end i choose chinese cos all his worker is chinese

hi, i think u misunderstanding liao...impossible cut 1 hole = rm 50.00
it is RM 5.00 per hole

Thanks

Wow... 1 contractor quote me 1400...

I think because urs 163sqft is a small job, so they quote you lump sum instead. or another reason is they ain't interested in the job i guess

---

Added on June 12, 2012, 6:21 pmbtw, mine was done with below :

1) RM2.50 / sqft - Flat Board
2) RM14 / ft - L Box
3) RM500 - Lump sum for unlimited Man holes, Fan Hooks and Light Holes


In total I have :
Manholes : 4
Light Hole : About 40
Fan Hooks : ABout 7

------------------
some may think its on the high side for the RM500 lump sum...but I m very happy with the workmanship and quality...they use thick aluminimum 3.5 inches and 9mm boards (if i remembered correctly)

Hope it helps.

This post has been edited by coconutzz: Jun 12 2012, 06:22 PM

Mine was done by Wai Teong, very responsible guy and fast delivery and he is flexible based on your schedule. Price is reasonable too

for plaster ceiling, i just wanna do side, mainly for wiring routing, is it ok?
my ceiling is about 10.5 ft, if do the L-box side and middle, would make my ceiling 9 ft.....i was thinking i can just do L-box on the side (rectangle) with downlight, middle part leave it as is it.

other alternative is to just use pvc trunking

Hi Sifus,

is this plaster ceiling considered "L-box" or "Flat standard" with cornice? tks


Attached thumbnail(s)

can pm me your contractor contact ? thx a lot

Mine also done by him, responsible and friendly guy
Nice white civic he has =.="

This post has been edited by boomber: Jun 15 2012, 01:49 AM

L-Box lah.

this called double step

---

Added on June 15, 2012, 8:56 pmthks for support bro, great to hear that u satisfied with my services...appreciated

---

Added on June 15, 2012, 8:58 pmthks for support bro, great to hear that u satisfied my service, appreciated!

This post has been edited by Wai Teong: Jun 15 2012, 08:58 PM

wai teong u do wiring also for house?

4.5/sq ft for flat ceiling with cornice all round. include painting. reasonable price? this is including removal of old ceiling and use existing timber framing. with additional works if required. if with new gi framing is 5.0/sq ft

quite like the "double step" design, may i know how much does it cost per sq ft? is it cheaper than L-box?

hi bro, yes, we r doing wiring as well...feel free to contact me, Thanks

---

Added on June 17, 2012, 12:21 amhi it is RM 20.00 per feet, feel free to contact me if u interested. thanks

This post has been edited by Wai Teong: Jun 17 2012, 12:21 AM

flat plaster ceiling berapa per sqf? if do for 915 sqf, how much it will cost?