@Edmin
Lol.. No wander the clock speed are different from what i see. Btw, stable at that speed huh? 100mhz extra juice from GPU and 150mhz extra from memory.. Thats alot of juice man.. Whats ur idle temp for this OC result?

On my way to OC mine now. Lazy to OC my procs as recently keep on torrent for drama an anime..

OT: The Sarah Connor Chronicles season 1 gonna end soon is it? Was download it now.. Got ah moi cantik inside..

@kabukiawie
Haha.. Wait the price drop until RM200!

@Sang
Hm.. Seems like the driver was causing u problem.. Are u using CRT or LCD? Had try the latest driver from ATI? U using the official driver right? Try to swap with 3rd party type and see how was it. Omega driver was one of my choice last time.

@Ray
Lol.. Kabu 73GT should be able to hook decent fps without AA on. But once AA on, i think he will start suffer already as 128mb vram wasnt enough for shader thou.

@fylon,that's why i ask kabu not to practice that.Else he will be crying along the game.Haha.Your 76GT if can o/c another extra 100MHz...wao i just you problem will be able to solve in crowded scene.

@sang
are you able to see the loading bar?? if just blank when reach desktop and all your keyboard still working, then should be driver problem.

yes, rock stable at that speed. idle temp with the zalman HSF is 43C, load @ 55C. And yes, Sarah Chronicles ending @ episode 12 for Season 1.

as expected, V6 in just a few months
come come oc ur rig
then we all cn prepare popcorn

@raymond
hey bro u haven edit my rig ler in the 1st page
could u edit it as shown at my sig?
thx man

i can see the loading bar .... it's all ok until the loading bar and then the siaran habis screen starts ... will try use that omega drive today ... ..one more thing, is it normal my 160Gb hdd detected as 130Gb when i make partiton for that hdd?

Sorry i was not aware that you have change mobo and RAM. Your Gigabyte sold off already ?Already updated on the first page.

Your GC still have problem with driver use? Seems like ATI GC has serious campatibility issues.

@sang
if omega still give you the same problem, maybe get older version driver try it out. since the difference is not much as newer driver mostly for game fix and optimize newer gc. just my 2 cents.

as for hdd detect fewer gb, its normal.

@ray
Lol.. Yea! He told me before. Well.. 128mb really not enough juice for AA. Just tried to push my GC. 600/750 seems stable during 3Dmark06.

@sang
Seems like my previous case where the driver was having issues with the monitor refresh rate. Try revert to older version and see how was it. And its normal for hdd to lost few GB of space when u plug it into ur rigs. Haha.. Dont worry its fine.

@edin
Not bad.. Are ur card using samsung chip? Mine wasnt, but hopefully it can be still push more abit.

@khai84siong
C'mon siong! Got get a DDR booster and boost ur rigs!! Go go go!!

@fylon,600/750 on your card can get how many marks?3D mark 06 is a bit stressing on your 7600GT.

@sang
i think there's smth wrong when u do partition
should be the same total when u add all the other partition 2gether
i mean if ur hdd is 160GB, u should hv between 145-150GB
130GB is too low

@raymond
thx man
my gigabyte mobo i keep at home
spoil ad nt sure cn repair o nt
keep as memory

@fylon
still searching for the booster

fylon, with the siong's rig. i would recommend get a better hfs before get the ddr booster. presHott ma... other components are fine. to get further, grap high performance ram.

Latest overclocking

Trying to reach sub 40's with stock cooler



Attached thumbnail(s)

@ray
Haha.. Didnt run the full test. Just run part of the test to the stability. So far so good.. Even with the HIS chip atleast its better then my previous 68GT which cant be OC.

@Kabu
Lol.. But then light OC stock HSF should be ok. Just his ram hold back the OC ability thou. BH-5!! Ever think once to get this type of ram but end up still stick with TCCD.

@ReaperOfSoul
Nice score u got there. By then ur proc was C0 stepping.. That might one of the reason ur temp is high. AFAIK, C0 was a piece of hot chip. Whats ur ram timing dude?

This post has been edited by fylon: Feb 29 2008, 05:51 PM

3-3-3-8 Kingston Value Rams

Edit: I cool the rams with a 8cm fan

This post has been edited by ReaperOfSoul: Feb 29 2008, 05:54 PM

i tot next week is the 2 hour season finale already? @@

How do i reach higher clocks ? It seems like my rams are limiting me...Should i put looser timings or tighter one? should i put 2.5-3-3-7 ?

@ReaperOfSoul
Ic.. No wander the PI score seems abit slow. Hm.. VR its a bit hard to be clock higher. Whats ur ram chip? D-43? If it was, then ur had a pair of overclockable ram thou. Mine ever high FSB251 with 3-4-4-8 timing.

Oh yea.. If ur ram was base on D-43 chip then i suggest u loosen the timing to 3-4-4-8 to archived high speed. These chip can hit very high speed with 2.8v vdimm but with the conditon u must ran it at loosen timing. Btw, what ratio are u using?

@Redundant
Ur terminator fan's also? Haha.. I was on my way to DL the whole series now. I was watch chinese sub's.. Latest epi was 07.

bro, u r absolutely right. looks like i m outdated. hm..sorry for that. original plan was 12 episodes. now they cut it short to 9 epsisodes during post production. thank you for correcting me.

My kingston rams are labelled as Kingston. How do i check what chips is it?

Edit: I dont think my mobo have the ram divider ratio thing lar...only see Auto / DDR 333 / 400 bla bla...nothing much

This post has been edited by ReaperOfSoul: Feb 29 2008, 07:55 PM