dont think so u can.

wat bios d board is loaded with currently? try to flash to 0605, latest one are quite buggy to me. everything back to default becoz d system is unstable. 

put htt to 200 and crank up d cpu multi. if not playin w multi buy b.e for wat... 

Drop your HT multiplier to 4X
Drop your ram divider.
change trfc to 195ns
it's either ram, HT Link or sub timings stop you
why don't you just remain everything, then push up the cpu multiplier only
since you're using 5000 BE, it has unlocked multiplier.
you can use this method to figure out what's the limit of your proc 1st without worrying your ram and your HT link

p/s: it's not FSB, it's HTT. No such thing as FSB in am2 platform
bro pws already explained it in earlier post

5000+ BE can go up to 4Ghz and above lar...

Why not 3.3GHz?? Only need a better cooling on the proc.

bro, if most b.e can hit 4.0GHz easily we should see some have done that here... those found in d net mite be of golden batch. "normal" 5000+ b.e usually walled @ 3.2GHz or near that range. 

---

Added on February 25, 2008, 9:54 am
Wokey wokey, 2 big bro scolded me joking lar...

@ ah_khoo,
You mean the old bios? Current one is the new one.. I think Biostar officially released 3 type only... I'll check it out later...
Btw, the reason i lowered my multiplier because I want to OC my RAM in stable status lar... Everytime over 3GHz and orthos fail.

since the start I already ignored my RAM OC and push my limit...
It's as same as reviewed stated.

Stock Vcore @ 3.1GHz (15.5X200)
Vcore +0.05 @ 3.2GHz (16X200)

Above than this I don't dare to try as I had only stock cooler Somebody, donate me some crappy cooler please

Here's come my new OC result...

[attachmentid=404320]

And below are the error message when I try to OC it beyond 290Mhz even thou the HT Link alraedy set at 16bit

[attachmentid=404321]

Any solution??

how muc ur vdimm bro?

5000+ BE can go up to 4Ghz and above lar...

Why not 3.3GHz?? Only need a better cooling on the proc.

it is quite hard i think.. unless the 5000+ be is a vr good batch~ or else nid hell of vcore

go to rebelheaven's forum to download d 0605 bios. 

since ur limited by ya coolin, u can:

- try to find how far ya chip can go w stock voltage.
- play w d cpu multi by not touchin d htt, oc sometimes are limited by high htt. by usin lower htt, u won't be hittin d wall so early.

ya ram is of wat chippies? 

Could you google up before reply

5000+ BE only have single batch and same chippy in Malaysia. Yet I'm unable to encountered different batch of BE.

3.1GHz with stock Vcore
3.2GHz with 1.36V-1.38V
3.3GHz with 1.42-1.45V

Yeah, I've mention, you need a good cooling. Else, Buy bulk and fried them one by one like french fries

Bro where u read those information?coz currently wif my setup HTT is running at 1114Mhz mean it is too high or?when i was playing Hellgate London there are a lot of artifacts..could it be the HTT porblem?

yea, i hav google up and i hope my be same as the one reviewed too. unfortunately, i can do 3.1ghz at stock orthos pass, 3.2 at 1.36V-1.38V but cant pass orthos.. the review can even pass 3.3ghz with crapy stock cooler.. what do u think?

err .. what ur clock speed, 111.14Ghz ?? 
HTT = intel FSB ( -pWs-)

example HTT (220Mhz) * multiplier (10) = clock (2.2Ghz)

by the way, i read those in Rebel Haven forum 

Mind to show me the link where those review stated they pass orthos or prime???
So far, I see them can boot only, but never show me that they pass orthos or prime for god sake.

Oh yeah, 3.3GHz can boot up with 1.45V or above with stock cooler but you have to think about the temp. You can use, but it's not healthy.

Oh yeah, board play a parts of it as well...

Rebel Haven Forum is very good forum for we all wan to learn..
bro cracksys learning very fast from there too

here is the links http://www.tomshardware.com/2007/10/22/bud...cker/page5.html
got 1 more review but cant find it now

here is the links http://www.tomshardware.com/2007/10/22/bud...cker/page5.html
got 1 more review but cant find it now

That was how long? 5 minutes of Prime??
I can show something like that too lar

hahaha .. they called 3 loop of prime95 as "stable operation"    .. n we here need to do orthos 1 hour to satisfy bro -pWs-

at tat vcore i cant do even 1 minute.. lolz