Ops...everyone Vcore drop when load.
How come my setup difference? DFI pattern

-pWs-

mine same figure all the time xD

onli if using 45W

f2 should be can struggle at 1.6v than G1/G2 but,on my rig F2 same batch za_az,i can run 2.7 at 1.405v but not guarantee stable for 24/7.

my rig now stick at 2667mhz just to fix pci/pcie/htt freq

I'd upgraded my CPU from 3800+ to 5000+ BE.

Pls update me on the page

X2 5000+ BE Brisbane 3210mhz | k3et | MSI K9N Ultra-2F | Kingston Value DDR2 667 | 402mhz | 5-6-5-18-23 2T | Cooler Master Hyper TX

Thanks Might try vcore at 1.6v tonight and see how it goes

I think u need to attach SS of orthos > 1hour or SuperPi 32M for ur result to be updated

This post has been edited by za_az: Feb 24 2008, 06:09 PM

just finished test it...sad the speed quite slow..
i tried 235*11...but cant boot with the same vcore..
vdimm 2v..


Attached thumbnail(s)

bro .. same la .. but mine drop and oso increase
biostar pattern
wooo 1.6v ha ..
bro amedion might feel challenged

---

Added on February 24, 2008, 8:21 pmdecrease ur HT link multiplier to 3x ..
in my case .. it helped.. a LOT

This post has been edited by cracksys: Feb 24 2008, 08:21 PM

i manage to oc my 5000+ BE at 3.2Ghz with vcore 1.45
is the vcore considered high?

hello nid u guy advice bout tis

Few time try do oc my 4200 f2 ....at speed 310 x10 ..Boot starup bios ok can see the startup windows.. after tat it stop at startup windows ..no hdd active

oledi try vcore from 1.425 to 1.525....vdimm 2.2 or 2.3 oso cannot even with losen timing and divider
but still fail

any guy know wat i nid to do ???

---

Added on February 24, 2008, 9:32 pmstill ok not very high..my 5000+be also nid vore 1.425 oc to 3.2g

This post has been edited by digswell: Feb 24 2008, 09:32 PM

u already hit the wall, either reach the limit of your mobo or ur proc

how high have someone oc 4200 (F2)?

still ok not very high..my 5000+be also nid vore 1.425 oc to 3.2g



but my 5000+ Be 3.2ghz vcore at 1.425 will fail to run Orthos for less than 3 mins only.
i have to increase to 1.45 then only can run Orthos for more than 1 hour.

This post has been edited by lee1767: Feb 24 2008, 09:38 PM

from stock vcoe 1.35 increace to 1.45 ..is oledi good ...
different mobo will different result...urs 5000 with tat vcore can say is very good

i read somewhere that high HTT could lead to corrupted harddisk and oso, artifact in display
why dont u go with higher multiplier bro ??

thats why not got ppl try as high like tis...so i going to try it

---

Added on February 24, 2008, 9:51 pmtry b4 with 290 x11 ...but nid vcore bout 1.5 to 1.6....every stressing fail
then i try at 300 x10 ....all stressing pass
so i try i 310...it fail to boot into windows
i no think high HTT cannot boot into windows ..
i saw db bro f3 oc ss post with tis ta770..
htt can do at 370 and HT link can do 1800

This post has been edited by digswell: Feb 24 2008, 09:54 PM

i'm a believer in slow oc not that it exist or what
try 306, 308 first and see the result ... oso, try lowering ur ram divider which i know u wouldnt

aeneon ddr2 800mhz ?? that one that claimed can reached to 1200mhz ha bro ?? i need to get one of those

what chipset code aneon using can reach at 1200mhz?

interested,any review?

Seem like lots of ppl using 5000+ BE.

i'm using it now with TA770.

I tested my rig,
11*290=3190 vcore+0.075 Orthos more then 9 hour no problem
12*270=3240 vcore+0.100 Orthos more then 10 hour no problem

tried 11*300 with vcore+0.125 No problem into window but orthos fail
tried 13*250 with vcore+0.125 No problem into window but orthos fail

finding way to get 3.3ghz....any5000+ BE user here running 3.3ghz?

Latest update Dun think can push more Bro -pWs- update my results please

AMD Athlon64 X2 3800+ Windsor F2 | za_az | Biostar TF7050-M2 | Kingston Value Ram | 900MHz | 5-5-5-15-22 | CoolerMaster Hyper TX AMD

This post has been edited by za_az: Feb 24 2008, 11:36 PM


Attached thumbnail(s)

dont think so u can.