AMDŽ Socket-AM2/AM2+ Overclocking thread (V6), Will AMD alive??
|
|
 Feb 19 2008, 10:44 AM
Return to original view | Post
#1
|
 
Senior Member
3,668 posts Joined: Jun 2006 From: Bikini Abyss  
|
can i have comment on this ?? i assume this is stable as i ran prime95 for 22hours i cant seem to put it beyond 2.900Ghz whatever setting I tried ... afraid to increase vcore sumore  ** Info ** Cooler : XP-90 Idle : 46c Full load : 49c (crap ??) This post has been edited by cracksys: Feb 19 2008, 10:46 AM |
|
|
|
|
|
Feb 19 2008, 10:52 AM
Return to original view | Post
#2
|
|
Senior Member
3,668 posts Joined: Jun 2006 From: Bikini Abyss
|
QUOTE(Amedion @ Feb 19 2008, 10:46 AM) Aiyo.. Vcore 1.312v only scare liao meh? really ha ??Go BIOS put 80c auto shut down.. I pump till 1.650 also no scare.. Coz overheat will auto shut down.. Too bad brisbane cannot go more even if u pump 1.7v  scare woo ... coz d Biostar hardware monitoring keep "weong!weong!" sometime  . i dont know whats wrong.how bout its temp ?? can be trust ?? |
|
|
Feb 19 2008, 12:17 PM
Return to original view | Post
#3
|
|
Senior Member
3,668 posts Joined: Jun 2006 From: Bikini Abyss
|
QUOTE(temptation1314 @ Feb 19 2008, 10:57 AM) weong weong??? Your CPU fan pusing fast lar si it?? haha .. lalat no but lot of cable, yes  Or there's lalat camping inside  Don't worry, try up it to 1.4V and monitor the temp... if not above 60, you can try up to 1.45V and that's the maximum... but you got good cooler shouldn't be a problem if + the vcore more than 1.45V  i'm pushing my vcore rite now ... but there seems to be a problem ... its doesnt stay put i mean .. in a second, it changed from 1.34 (current) to 1.31 and then upped again to 1.33 .. is this normal ?? QUOTE(Amedion @ Feb 19 2008, 12:05 PM) Not all can go 4Ghz.. waa ... on the same route as me But if compare price between BE 5000+ vs E2160.. I'm in doubt.. Muahaha.. Now stressing my brisby at 2950Mhz.. NO error for 2 hours 15 minutes already... Load 54c~56c.. Based on my n00b experience .. Processor clock too high = system freeze GFX clock too high = artifacts all over the screen n system freeze Ram clock too high = system restarts Mobo HTT too high = Fail in ORthos?  currently stressing at 2.945 ... crossing fingers bout that n00b exp, i second that conclusion  |
|
|
Feb 20 2008, 10:05 AM
Return to original view | Post
#4
|
|
Senior Member
3,668 posts Joined: Jun 2006 From: Bikini Abyss
|
i could not take this anymore .. even though i'm still in the grey side ...
can i be on the list oso ?? CODE AMD X2 4000+ Brisby | cracksys | Biostar TA690G | Team Value DDR2 667 | 400 | 5-5-5-15 | ThermalRight XP-90 
i need assistance ... i upped d vcore to 1.4 but there are nothing ... i could only set the HTT to 310 doesnt matter if i'm on 1.28v, 1.32v or 1.4v does this mean, i'm hitting the wall odi ??  |
|
|
Feb 20 2008, 10:14 AM
Return to original view | Post
#5
|
|
Senior Member
3,668 posts Joined: Jun 2006 From: Bikini Abyss
|
QUOTE(za_az @ Feb 20 2008, 10:11 AM) @cracksys, use ur ram command rate as 2T might help okey .. this may sound weird as it may sound but ... i cant boot into windows if i set it to 2t (boot bios okay) |
|
|
Feb 20 2008, 10:27 AM
Return to original view | Post
#6
|
|
Senior Member
3,668 posts Joined: Jun 2006 From: Bikini Abyss
|
QUOTE(ah_khoo @ Feb 20 2008, 10:16 AM) try to set everything to auto EXCEPT 2T command rate enable. will do ... QUOTE(Amedion @ Feb 20 2008, 10:19 AM) Try different multiplier.. My no-fail in Orthos setting :- rite now my no fail in orthos is somewhat x10.5 = 2945Mhz x10 = 3003MHz x9 = 2835Mhz  x10.5 = 2750Mhz (260HTT) x10 = 2850Mhz (285HTT) x9.5 = 2945Mhz (310HTT) i'm starting to think, this is it  This post has been edited by cracksys: Feb 20 2008, 10:30 AM |
|
|
|
|
|
Feb 20 2008, 12:05 PM
Return to original view | Post
#7
|
|
Senior Member
3,668 posts Joined: Jun 2006 From: Bikini Abyss
|
QUOTE(ah_khoo @ Feb 20 2008, 10:16 AM) try to set everything to auto EXCEPT 2T command rate enable. nope ... doing this will make biostar setting all those timing into tight onestill bootable but will reset HTT to 200 QUOTE(za_az @ Feb 20 2008, 10:36 AM) @cracksys, theres other more option.. Have u try to loosen your trfc? more extreme outcome .. cannot boot at allneed to reset bios sumore ------------------------------------------ i wanted to go more but maybe its my ram thats holding me back ... or maybe its my bios version ... (updated one, flashed by previous owner)  |
|
|
Feb 21 2008, 08:14 PM
Return to original view | Post
#8
|
|
Senior Member
3,668 posts Joined: Jun 2006 From: Bikini Abyss
|
QUOTE(joe_star @ Feb 21 2008, 07:33 PM) Speaking of power consumption with overclocks, do any of you here use crystal cpuID's multiplier management setting? I'm using it with my rig and I think its better than C n Q as it allows you to customize your voltage(for sad ppl like me without F3's sue them if it burnt  )Heres how I got mine setup Full load: 3.0ghz @1.52V Middle: 2.2ghz @1.2V Idle: 1.3ghz @ 1.0V Each state is fully stable by itself and the system is also fully stable while running like this. I think its much better than the actual C n Q as that does not allow you to change volts  (i know, they said not responsible in their t&a odi)hahaha ... so, i came and i ask question, as usual ... if i enable C&Q, what will be my maximum clock ?? is it the one set for the proc (2100mhz for X2 4000+) or the overclocked clock (2+++mhz) ================================================ i heed for ah_khoo advice (sifu  ) and yes, my ram problem is connected to the most recent bios update .. so i tried 0605 like what had been advised but i didnt like the fact that there is no 1/2 multiplier...any suggestion what is the stable-lest bios for biostar ta690g ?? This post has been edited by cracksys: Feb 21 2008, 08:40 PM |
|
|
Feb 21 2008, 08:42 PM
Return to original view | Post
#9
|
|
Senior Member
3,668 posts Joined: Jun 2006 From: Bikini Abyss
|
QUOTE(xixo_12 @ Feb 21 2008, 08:35 PM) i think no one try the mod bios from rebel for ta690g.. a lot of tweaking, maybe u can try n inform here i might, i might ... but i dont understand this phare:To test this: YOU MUST BE ABLE TO RECOVER FROM A BAD FLASH! |
|
|
Feb 21 2008, 08:50 PM
Return to original view | Post
#10
|
|
Senior Member
3,668 posts Joined: Jun 2006 From: Bikini Abyss
|
QUOTE(FuiLo @ Feb 21 2008, 08:45 PM) After trying and testing with my fren's Biostar TF6100 AM2, still can't manage to get 3Ghz with my Brisby 4000+ i dont think you need that kind of vcore to get 2.9++ .. but with that kind of cooler, i assume you dont care  ..but 2.924Ghz is good enough for me ady..any sifus here can tell me wat actually is the problem..i was not manage 2 boot when the FSB is set to 280Mhz no matter how much vcore i pump .. |
|
|
Feb 21 2008, 09:04 PM
Return to original view | Post
#11
|
|
Senior Member
3,668 posts Joined: Jun 2006 From: Bikini Abyss
|
QUOTE(joe_star @ Feb 21 2008, 08:46 PM) Sue who? ... u made me jealous I'm using a freaking giant tuniq tower to cool the proc la, max temps are arnd 55C  QUOTE(FuiLo @ Feb 21 2008, 08:55 PM) haha..yalor..many people manage to get 2.8Ghz with stock vcore..but i wasn't able to pass Orthos if i leave it vcore at auto..at 1.4V also stucked somewhere at 5~6 minutes..herm..wat could be the prob?could it be the PSU prob?as when i run orthos the +12V is rated at 11.6x..so any advices?I saw my fren's Enermax FMA II is holding at 11.90 during stressing.. what psu are u using ?? 11.6-11.9 doesnt seems huge ... but maybe its technically huge |
|
|
Feb 21 2008, 09:08 PM
Return to original view | Post
#12
|
|
Senior Member
3,668 posts Joined: Jun 2006 From: Bikini Abyss
|
QUOTE(xixo_12 @ Feb 21 2008, 09:06 PM) u might wanna try if ta690g why ??because its cheap ka ?? u broke my dear ta690g heart bro  This post has been edited by cracksys: Feb 21 2008, 09:10 PM |
|
|
Feb 21 2008, 09:16 PM
Return to original view | Post
#13
|
|
Senior Member
3,668 posts Joined: Jun 2006 From: Bikini Abyss
|
QUOTE(xixo_12 @ Feb 21 2008, 09:11 PM) try la.digswell edi pro how to recover the bios from bad flash.. if he have 2 ta90, i think he aledi try it hahaha ... just joking bro.i might try it ... but like what has been said by forumer in rebel haven: QUOTE ta690g BIOS has every known memory timing in this world and i didnt recognize 3/4 of them .. is this okay ?? i mean, when i set it to auto, it made my system unbootable by setting other timing to the tight one  |
|
|
|
|
|
Feb 21 2008, 09:19 PM
Return to original view | Post
#14
|
|
Senior Member
3,668 posts Joined: Jun 2006 From: Bikini Abyss
|
QUOTE(xixo_12 @ Feb 21 2008, 09:17 PM) use wut divider?? 533 ... tried 667 but need to reset bios after that |
|
|
Feb 21 2008, 09:29 PM
Return to original view | Post
#15
|
|
Senior Member
3,668 posts Joined: Jun 2006 From: Bikini Abyss
|
QUOTE(digswell @ Feb 21 2008, 09:21 PM) hotflash my abit NF7S V2 coz bad bios ,KN2delta coz modded bios,biostar 770 coz try mooded bios okey, that have just reduce my confidence to 15% QUOTE(xixo_12 @ Feb 21 2008, 09:21 PM) when u set to auto.. it will follow as cpuz table.. for sure it very tight timing..n u cant boot at all.. unless u pump 2.4v but, but ... i dont know what to set for other setting :tRC Refresh Mode select tRRD tRTP Idle cycle limit tWR tWTR tRTW R/W Queue Bypass Queue Bypass Max Max Async Latency tRD any suggestion ?? |
|
|
Feb 21 2008, 09:34 PM
Return to original view | Post
#16
|
|
Senior Member
3,668 posts Joined: Jun 2006 From: Bikini Abyss
|
QUOTE(xixo_12 @ Feb 21 2008, 09:31 PM) look at cpuz.. just adjust the timing that basic for the beginner am2 x2 4000+ brisbanewut is ur spec?? biostar ta690g team value 667mhz psu .. silverstone stryder sumthing ( just bought) |
|
|
Feb 21 2008, 10:27 PM
Return to original view | Post
#17
|
|
Senior Member
3,668 posts Joined: Jun 2006 From: Bikini Abyss
|
guys, guys ... i know this sound stupid
but do you install those update from amd website ?? |
|
|
Feb 22 2008, 09:27 AM
Return to original view | Post
#18
|
|
Senior Member
3,668 posts Joined: Jun 2006 From: Bikini Abyss
|
QUOTE(alive88 @ Feb 21 2008, 09:38 PM) @cracksys here is the ss ... along with stable (overrated actually) superPIteam value..hmm mine to show some ss?the highest clock ram u oc?
hurm ... using d 2nd most recent bios and i'm kinda like it it allows 2t command rate and auto-reset setting for bootable-ity in most of the time CODE AMD X2 4000+ Brisbane | cracksys | Biostar TA690G | Team Value DDR2 667 | 750Mhz | 5-5-5-15 | ThermalRight XP-90 |
|
|
Feb 22 2008, 03:40 PM
Return to original view | Post
#19
|
|
Senior Member
3,668 posts Joined: Jun 2006 From: Bikini Abyss
|
QUOTE(-pWs- @ Feb 22 2008, 02:43 PM) I see. I will update when I m free. -pWs-  update me too ...Added on February 22, 2008, 3:41 pm QUOTE(digswell @ Feb 22 2008, 03:39 PM) Getting boring with 770 offical bios go bro digswell go !! might try The Rebels Haven mod bios This post has been edited by cracksys: Feb 22 2008, 03:41 PM |
|
|
Feb 22 2008, 03:51 PM
Return to original view | Post
#20
|
|
Senior Member
3,668 posts Joined: Jun 2006 From: Bikini Abyss
|
QUOTE(digswell @ Feb 22 2008, 03:48 PM) Sure i will go tonight... reached to stable 3.002 edi ... but the temp hope the bios won fail me again 1 more thing..u shold try yrs brisby beyond 3g.  ..no just stay at 2.95 only.keep try many sifu here like ah khoo alive db pws will help u  full load 62c, sure kaput ma |
|
Topic ClosedOptions
|
| Change to: |  0.0197sec
 0.12
 7 queries
 GZIP Disabled
Time is now: 7th December 2025 - 04:30 PM |
Quote