did u use lower ram divider and lower HT??

wan to know urs 4200 is windsor F2 or birsbane G1 core
try without increase the vcore 1st ..check out hw high can go
my 4200 f2 can go 2662  all stock voltage and wit CnQ on

everything looks ok..what may slack a bit here is ur vdimm..what vdimm do u use?

try reduce HT multiplier first....btw,it's hard to find 'org sarikei' here

so ur vdimm will stay at 1.8v default..now go to ur bios and find vdimm(ddr2 voltage)..increase it to 2.0 or 2.1...

when u reduce cpu multiplier, the speed will decrease,and less vdimm and vcore needed..thats why it is stable..
change back to 11x,and increase the vdimm ONLY.

sometimes bro..coz at 1.8v,then being stressed by cpu,i dont 1.8v going to be enuf..u can use and boot,but not stable when get stressed

---

Added on February 24, 2008, 11:45 am

of coz can do higher..but step by step bro..go and change the multiplier back..increase vdimm,and try stress

i think without increace vcore can go around 240 or 250

See my cpuz ss....
Stock Vcore tu

try tis..
multipier=11x
Vcore =1.25 to 1.3
Vdimm 2.0 or 2.1
CnQ Off
HT 600 or 800 (3x or 4x)

werd ...
what's ur ht link ?? my brisby could go 292*10 without vcore increment

try loosen those last number in ur timing ... 15 --> ++

Let  me help u to push it   

I downloading ur mobo manual   .....hv to read a bit thing in bout the bios 

after that can teach u step by step

yup, he's one of the few who have lotsa enthusiasm. 

htt link reduce to below or equal 1000. 

look like tis mobo  a bit hard for new ocer.... got a few setting which is very advance

CPU<>NB speed  SB<>NB speed  NB<>SB  speed  the 3  setting is HT link .....

why not increase the vcore?