Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed
115 Pages « < 37 38 39 40 41 > » Bottom

Outline · [ Standard ] · Linear+

 AMDŽ Socket-AM2/AM2+ Overclocking thread (V6), Will AMD alive??

views
     
alive88
post Feb 24 2008, 11:42 AM

Pata Pata Pon! Pon Pon Pata Pon!!
******
Senior Member
1,406 posts

Joined: Jun 2007
QUOTE(digswell @ Feb 24 2008, 11:37 AM)
macam Crucial Ballistix  susah run at stock vdimm ..betul ker ??kena increace vdimm ???
*
sometimes bro..coz at 1.8v,then being stressed by cpu,i dont 1.8v going to be enuf to run ddr972 even wif loose timing..u can use and boot,but not stable when get stressed

Added on February 24, 2008, 11:45 am
QUOTE(mois @ Feb 24 2008, 11:42 AM)
but the system now tested for 30mins le..stop it then go bios again?
after change vdimm to 2.0v, then how about the proc speed? 11x230=2530Mhz?
or can do higher?  brows.gif ..
*
of coz can do higher..but step by step bro..go and change the multiplier back..increase vdimm,and try stress

This post has been edited by alive88: Feb 24 2008, 11:46 AM
mois
post Feb 24 2008, 11:47 AM

Enemy Territory
*******
Senior Member
3,626 posts

Joined: Nov 2007
From: Hornbill land
QUOTE(alive88 @ Feb 24 2008, 12:42 PM)
sometimes bro..coz at 1.8v,then being stressed by cpu,i dont 1.8v going to be enuf..u can use and boot,but not stable when get stressed

Added on February 24, 2008, 11:45 am

of coz can do higher..but step by step bro..go and change the multiplier back..increase vdimm,and try stress
*
now i try test current system..if fail, i go change back... laugh.gif
RAM timing let it 5-5-5-18?
temptation1314
post Feb 24 2008, 11:47 AM

Specials : 1,000,000 Spam Post Attack
*******
Senior Member
2,287 posts

Joined: Jun 2007
From: Anno Domini Time Ultra: 1,000,000 Trans Am Attack!
Tomorrow when I'm on office, I'll show my SS brows.gif
My Corsair Value RAM OC'ed to 840Mhz sweat.gif not sure it's healthy for the RAM or not... tongue.gif
digswell
post Feb 24 2008, 11:49 AM

Look at all my stars!!
*******
Senior Member
2,484 posts

Joined: Nov 2007
From: Nilai,N.S.D.K
QUOTE(mois @ Feb 24 2008, 11:42 AM)
but the system now tested for 30mins le..stop it then go bios again?
after change vdimm to 2.0v, then how about the proc speed? 11x230=2530Mhz?
or can do higher?  brows.gif ..
*
i think without increace vcore can go around 240 or 250
mois
post Feb 24 2008, 11:52 AM

Enemy Territory
*******
Senior Member
3,626 posts

Joined: Nov 2007
From: Hornbill land
QUOTE(digswell @ Feb 24 2008, 12:49 PM)
i think without increace vcore can go around 240 or 250
*
really ar? i tried but cant boot..need to pump the vdimm first?
digswell
post Feb 24 2008, 11:58 AM

Look at all my stars!!
*******
Senior Member
2,484 posts

Joined: Nov 2007
From: Nilai,N.S.D.K
QUOTE(mois @ Feb 24 2008, 11:52 AM)
really ar? i tried but cant boot..need to pump the vdimm first?
*
See my cpuz ss....
Stock Vcore tu

Attached Image

try tis..
multipier=11x
Vcore =1.25 to 1.3
Vdimm 2.0 or 2.1
CnQ Off
HT 600 or 800 (3x or 4x)

This post has been edited by digswell: Feb 24 2008, 11:59 AM
alive88
post Feb 24 2008, 12:01 PM

Pata Pata Pon! Pon Pon Pata Pon!!
******
Senior Member
1,406 posts

Joined: Jun 2007
QUOTE(mois @ Feb 24 2008, 11:47 AM)
now i try test current system..if fail, i go change back... laugh.gif
RAM timing let it 5-5-5-18?
*
put 2.1 vdimm,then change the timing to 5-5-5-5-11-2t icon_rolleyes.gif
xixo_12
post Feb 24 2008, 12:03 PM

i!Retired!i
*******
Senior Member
7,318 posts

Joined: Nov 2006
From: Pulau Sipadan
got my ta690g edi brows.gif
alive88
post Feb 24 2008, 12:05 PM

Pata Pata Pon! Pon Pon Pata Pon!!
******
Senior Member
1,406 posts

Joined: Jun 2007
haha..no credit to rep la bro..tested already ar?
digswell
post Feb 24 2008, 12:05 PM

Look at all my stars!!
*******
Senior Member
2,484 posts

Joined: Nov 2007
From: Nilai,N.S.D.K
QUOTE(xixo_12 @ Feb 24 2008, 12:03 PM)
got my ta690g edi brows.gif
*
wow bleh oc la rclxms.gif ...pkai aper proc hmm.gif ..?? LE ker or F3 hmm.gif (ur Formula F3 ada lagi ker laugh.gif )

This post has been edited by digswell: Feb 24 2008, 12:06 PM
ah_khoo
post Feb 24 2008, 12:12 PM

- No Action Talk Only -
Group Icon
Elite
8,103 posts

Joined: Jan 2003
From: Tanah Lot @ Dungun, Terengganu.
QUOTE(xixo_12 @ Feb 24 2008, 12:03 PM)
got my ta690g edi brows.gif
*
fast fast show result lah... yawn.gif

oc jangan tak oc... brows.gif
temptation1314
post Feb 24 2008, 12:14 PM

Specials : 1,000,000 Spam Post Attack
*******
Senior Member
2,287 posts

Joined: Jun 2007
From: Anno Domini Time Ultra: 1,000,000 Trans Am Attack!
Eh, bro skalian, I try OC my TA690 go beyond 270-280 FSB, during bios startup got one message "....running at stock value, please configure..." tongue.gif sweat.gif forget... But when that message pop up and i insist to proceed to windows, the FSB back to 200 even thou I set 270 or 280 @ bios...

But now I tested with 280FSB stable already sleep.gif I wonder why ler?
cracksys
post Feb 24 2008, 12:14 PM

I'm a Vault Dweller!!
*******
Senior Member
3,668 posts

Joined: Jun 2006
From: Bikini Abyss
QUOTE(joe_star @ Feb 24 2008, 11:15 AM)
I dont think AMD C n Q will work properly with your overclocked proc as you have raised the voltages, while C n Q operates with stock voltages. Use crystal cpu ID. With it you can set the proc to operate at lowest possible voltage n multiplier at idle to save on electricity and heat and set it to your required oc levels for gaming and other stuff. It works to adjust the settings automatically just like C n Q smile.gif
*
QUOTE(digswell @ Feb 24 2008, 11:26 AM)
depend ....my dont hv any probelm with it
*
thanks ... i'll try crystal cid. i've tried enabling C&Q at 2.92ghz@stock voltage and i got BSOD, wth shakehead.gif

Added on February 24, 2008, 12:16 pm
QUOTE(temptation1314 @ Feb 24 2008, 12:14 PM)
Eh, bro skalian, I try OC my TA690 go beyond 270-280 FSB, during bios startup got one message "....running at stock value, please configure..." tongue.gif sweat.gif forget... But when that message pop up and i insist to proceed to windows, the FSB back to 200 even thou I set 270 or 280 @ bios...

But now I tested with 280FSB stable already sleep.gif I wonder why ler?
*
i got that one too sometime (along with blipping red led) ... i reboot after that and then my ta690g acted like nothing happen laugh.gif

This post has been edited by cracksys: Feb 24 2008, 12:16 PM
mois
post Feb 24 2008, 12:16 PM

Enemy Territory
*******
Senior Member
3,626 posts

Joined: Nov 2007
From: Hornbill land
QUOTE(digswell @ Feb 24 2008, 12:58 PM)
See my cpuz ss....
Stock Vcore tu

try tis..
multipier=11x
Vcore =1.25 to 1.3
Vdimm 2.0 or 2.1
CnQ Off
HT 600 or 800 (3x or 4x)
*
bro, cant boot..lol..vcore 1.334..
vdimm 2.0..
multiplier 11
5-5-5-15
speed 230..cant.. cry.gif
ah_khoo
post Feb 24 2008, 12:19 PM

- No Action Talk Only -
Group Icon
Elite
8,103 posts

Joined: Jan 2003
From: Tanah Lot @ Dungun, Terengganu.
QUOTE(temptation1314 @ Feb 24 2008, 12:14 PM)
Eh, bro skalian, I try OC my TA690 go beyond 270-280 FSB, during bios startup got one message "....running at stock value, please configure..." tongue.gif sweat.gif forget... But when that message pop up and i insist to proceed to windows, the FSB back to 200 even thou I set 270 or 280 @ bios...

But now I tested with 280FSB stable already sleep.gif I wonder why ler?
*
go to htt setting, set d 1st option (4got wat it is), change d value from auto to 16-bit. leave others unchange, save & exit. things shud be fine after that. smile.gif
cracksys
post Feb 24 2008, 12:20 PM

I'm a Vault Dweller!!
*******
Senior Member
3,668 posts

Joined: Jun 2006
From: Bikini Abyss
QUOTE(mois @ Feb 24 2008, 12:16 PM)
bro, cant boot..lol..vcore 1.334..
vdimm 2.0..
multiplier 11
5-5-5-15
speed 230..cant.. cry.gif
*
werd ...
what's ur ht link ?? my brisby could go 292*10 without vcore increment

try loosen those last number in ur timing ... 15 --> ++

@ah_khoo - notworthy.gif

This post has been edited by cracksys: Feb 24 2008, 12:22 PM
xixo_12
post Feb 24 2008, 12:22 PM

i!Retired!i
*******
Senior Member
7,318 posts

Joined: Nov 2006
From: Pulau Sipadan
QUOTE(digswell @ Feb 24 2008, 12:05 PM)
wow bleh oc la rclxms.gif ...pkai aper proc hmm.gif ..?? LE ker or F3  hmm.gif (ur Formula F3 ada lagi ker  laugh.gif )
*
formula F3 aper 2?? tak paham

QUOTE(ah_khoo @ Feb 24 2008, 12:12 PM)
fast fast show result lah...  yawn.gif

oc jangan tak oc...  brows.gif
*
poison jer kan tongue.gif
mois
post Feb 24 2008, 12:22 PM

Enemy Territory
*******
Senior Member
3,626 posts

Joined: Nov 2007
From: Hornbill land
QUOTE(cracksys @ Feb 24 2008, 01:20 PM)
werd ...
what's ur ht link ?? my brisby could go 292*10 without vcore increment

try loosen those last number in ur timing ... 15 --> ++
*
i wonder wad is HT link...i dont change that thing...
rainingzero
post Feb 24 2008, 12:22 PM

I miss my student life~
*******
Senior Member
2,497 posts

Joined: Jan 2006
From: Selangor
QUOTE(mois @ Feb 24 2008, 12:16 PM)
bro, cant boot..lol..vcore 1.334..
vdimm 2.0..
multiplier 11
5-5-5-15
speed 230..cant.. cry.gif
*
already disable CnQ??
coz that features make ur ocing unstable...
digswell
post Feb 24 2008, 12:25 PM

Look at all my stars!!
*******
Senior Member
2,484 posts

Joined: Nov 2007
From: Nilai,N.S.D.K
QUOTE(xixo_12 @ Feb 24 2008, 12:22 PM)
formula F3 aper 2?? tak paham
*
urs 3800+ f3 ader lagi kerr
« Next Oldest · Overclockers United · Next Newest »
 

115 Pages « < 37 38 39 40 41 > » Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
 0.0165sec    0.68    6 queries    GZIP Disabled
Time is now: 16th December 2025 - 06:21 AM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.