OK2. thnx bro.

Later zuzu came hopefully my RAM won't hold back laa. But still cannot beat bro db lorr. At least 4400+ only 4 members so far, and jackdante22 is trying to reach to the top

Not in a million years

. kidding only.

how about ur lapped x2 3600+lapped GeminII with my X2 4400+GeminII. also trade Delta fans with my super duper uber Evercool? haha...

If ram is your bottleneck, what you have to do is go to 3rd room, there's a cm casing with 4x1gb OCZ there, take it out and put at yours. Kawtim

1st try wif my 10th anny...
2.01 vdimm...



any tips to gain more, SIFUs?

Weyh, lapping easy onli nia. I have leftover sandpaper from 100 - 2000 grit.

---

Added on February 20, 2008, 8:20 pm10th anni have to wait for db,-pWs- and ongbs then

This post has been edited by mizivincible: Feb 20 2008, 08:20 PM

X2 3600+ + lapped GeminII = X2 4400+ + GeminII sure can But super duper uber Delta H fans with suk suk Evercool ? Not a chance

C'mon stress for 3.1GHz or 3.2GHz before we go out

Yeah I like that. Or maybe I can wait a bit and 'have a look' on OCZ nVidia SLi Edition ?

tight ..put at 5-5-5-5-11, and put at 2.2v
summore 3.0ghz using divider800...
urs is F3 rite.. so no need to worried about high temp.. supose can 3ghz as 24/7

trfc set to 75ns
mal set to 8
if u want more tight just set to 5-5-4-5-11-2T

it is based on my xperience..

actually 10th can do 5-5-5-5-11 with 2.0~2.1 onli.. so it depend on urs.. i just said to use 2.2v to test it first.. n u can reduce it if u like n think there is no error will appear

This post has been edited by xixo_12: Feb 20 2008, 08:36 PM

my vdimm highest is 2.01v oni...
fluctuate at 2.01~2.03v...

no worries.. 2.0 is just enough .. try first.. who know can run pretty well at ddr-1200

but try to loosen ur timing n other setting.. then u tweak one by one using memset.. if doesnt freeze.. congrat bro..

This post has been edited by xixo_12: Feb 20 2008, 08:38 PM

hmm.. if i'm not mistaken,
TF6100am2 has two spoil memory dividers.
when i use the 667 divider,
couldn't reach 1000Mhz no matter how.
and the 800 divider, it will stop at 2.7GHz-2.8GHz like that
I tried to fix it by using vdimm mod last time, but failed
it's something to do with the bios , the default sub timings too tight.
but i don't know how to tweak kaw kaw yet last time
also, bear in mind that you'll need more vdimm to oc if you're using integrated gc

anyway, bro byfc2010,
mind to show me a memset SS?
i see what can be fixed if the problem still there

This post has been edited by dblooi: Feb 20 2008, 09:03 PM

guys, i wanna ask, most of the time u all oc ur system


the ram timings:

u all set to auto first --> oc the htt to the wall --> then re-fix (tighten) the timings

or

loosen the timings to the max --> oc the htt to the wall --> then re-fix (tighten) the timings?



i wanna play around with the timings, but hell there's damn lotsa settings

do u all change the timings all of the settings? or just the main one (CL, tRCD, tRP, tRAS, tRC)?

this time with 3.1GHz





Bro -pWs-, please do update my OCing

it doesn't freeze immediately...
bt after restart windows will hang d...

bro -pws-, can update my overclock into database? thx

AMD X2 5000+BE Brisbane G2 | hengmy | Biostar Tforce590sli Deluxe | OCZ Value DDR2 667 | 824MHz | 4-4-4-12-16 | TTBTVX




Attached thumbnail(s)

ur BE cannot go higher?

very good result.....why dont try the multipier 15x

@hengmy, nice result Topping other BE on the lists

can boot into window @ 3.4ghz.. but cant pass orthos, can 10 minute only
dont knwo is my ram or vcore problem.. or ady hit the limit...

---

Added on February 20, 2008, 10:40 pmcoz wanted high ht value.. haha

---

Added on February 20, 2008, 10:41 pmthx.. but i wnted at least 3.4ghz

This post has been edited by hengmy: Feb 20 2008, 10:41 PM

1st super PI 1M SS with 10th anny...

vdimm 2.01V~2.03V...



continue OCing quest...wif sifu db...