so go for ram la..
poison lil bit..
gud ram can oc more.. we want moarrrr

y not push it further bro, i'm sure ya f3 is capable of 3.0GHz w/ that kinda voltage.

3.0GHz (10*300) w/ 667 divider, ram runnin 1000 @ 4/5-4-4-8 is just nice for ya 10 annith imo.


let see whether i can sell off mine 1st, but d temptation is strong...

This post has been edited by ah_khoo: Feb 21 2008, 10:11 AM

the force is strong in you
TA690G is good in ram overclocking

i'm still noob in ram clockin bro, trial & error is really tirin for an old man like me...

until now, i only have d chance to play w one pair of ram, that's d one i'm usin...

back in s939 days, i managed to play w few pair, that's y i'm more comfortable w ram overclockin on that platform.

too bad i'm not able to brin out d best of my dcdcl, they were capable of 1000 @ 5-4-4-12 on intel w/ 2.2v but not on d current rig...

This post has been edited by ah_khoo: Feb 21 2008, 11:03 AM

AMD Athlon 64 X2 4000+ Brisbane BH-G1 | AMD Athlon | Biostar TForce560A2+ | Kingston DDR2 667 Value | 533Mhz | 5-5-5-15-CR1 | Stock



Btw how to add voltage eh?I add via BIOS straight kena BSOD
Btw using stock voltage too.I guess might upping higher if got good cooler like Artic Freezer 64?Maybe?
Temperature Idle very cool oh 33C when stress 60++ when gaming 40-50++

This post has been edited by AMDAthlon: Feb 21 2008, 11:35 AM

check again d contact between hsf & d chip, it's kinda impossible to reach 60++ onlad for that kinda voltage. i assume ur not usin core temp which can't read brisby temp correctly. if possible, re-seat d hsf...

nice clock @ low voltage...

This post has been edited by ah_khoo: Feb 21 2008, 11:45 AM

Dont think so eh..Everest not accurate meh?

dont use the T-Utility Fan Control stupid monitor software
Close it coz it slow down the fan speed

Bro, my expreinece with this board is, beyond FSB 250 need to increase the chipset voltage ady, so do that 1st n then increase the core voltage. And your temp looks a lil high, i tink digswell is right, u can still use the biostar fan utility but set the fan to manual 100%

o.O

Increase the chipset voltage how much ah?Dont want so high..insufficient cooling

Btw,yes i use it and set it to 100% de..
Yeah temperature abit crazy but when idle very cool oh 33C...



This post has been edited by AMDAthlon: Feb 21 2008, 12:20 PM

Hmm sound like ur casing no enuf fan for intake and outlet
if so..better mod it

got 1 25CM fan and 1 80CM fan..i need more fan lor..Btw,chipset cooler good?And looking for cheap one.Which 1 you guys prefer?

@digswell, I see u r using the Aeneon rams..Can tell the performance of it ar? Chipset cooler? imo, i think CM Blue Ice II(cost around 50-70 i think)
Wah,different casing from mine..Mine also got 1x25cm fan, 2x12cm fan and 1x8cm fan xD

This post has been edited by Lacus: Feb 21 2008, 12:38 PM

wat i mean is the casing fan...u nid it to blow out the hot air in ur rig casing

like mine i using 4x 80mm fan for outlet and 1x 120mm and 2x 80mm for intake ..and my casing is Cooler master Alum....blar blar
So my cpu temp ide at hot day below 35C and night 28C.. (tis is oloedi oc from 2.2 to 2.8g)

---

Added on February 21, 2008, 12:43 pmPerformance is not very good ...all i can it just can oc below 1000mhz
chipset cooler i using cm blue ice (small tower)

This post has been edited by digswell: Feb 21 2008, 12:46 PM

mine ar..1 x25cm on the side panel blowing ar in, 1x12cm for air intake and 1x12cm for outtake. Another 1 8cm on the top outtake also. But i think depens on casing kua...Quite cooling compare to my old cheap icute casing XD

Bro Lacus, U were asking about Aneon Ram right ? Why dont you try Team Elite 800 that capable of doing beyond 1000mhz It uses promos chip which really oc-able.

---

Added on February 21, 2008, 1:42 pmWait till you see my GeminII with Two 120x120x38mm Sanyo Denki H series. That cooler alone is frigging heavy, not adding those two big fan. The weight is more than 1kg plus.Later if got chance I'll measure the weight But still my TA690G runs strong

---

Added on February 21, 2008, 1:50 pmWhy chipset cooler when u still using stock hsf ? Should change the hsf first to better one. If you want super air cooling, Thermalright IFX that cost you rm299 only the cooler alone

---

Added on February 21, 2008, 2:01 pmTried out my friend Asus M2A-VM, surprisingly, no ram timing setting. They original set at 5-5-5-15-21. I would say TA690G is fully equipped with oc setting

This post has been edited by mizivincible: Feb 21 2008, 02:01 PM

hmm, 2 sifu here already poisoning me with Crucial 10th Anniversary

Of course 10th anny is way better than those value ram that you mentioned. 1200mhz without any sweat, Im sure you cant resist the temptation. But is there still any seller that carries 10th anny ? Kinda rare nowadays.

Crucial 10th Anniversary is very good . .. am i right ???

You calling me??

How good the RAM for me also no use, coz I don't know how to fully utilize them at all