So, which is good ? 

IF compare to Team Elite DDR800 ? I wanna get it later lar.. Dunno which to buy.. Budget RM 190... 
Oops.. Sorry.. Kinda forgotten.. Thanks for reminding...

AMD x2 Brisbane 4000+ | Amedion | Biostar TF550 v1.3 | Mushkin DDR667 Value Ram | 874Mhz | 5-5-5-18-26-2T | Arctic Freeze64 Pro

[attachmentid=400035]

  Don't laugh lar ! using lousy mobo eh.. 

rma matter..
i think less one year buy.. u got easy to change..
then after one year.. u will face sum prob to change to new one.. they will baik2 first year.. then jahat2 after that..

---

Added on February 18, 2008, 9:42 pm
aper dah.. change 1t to 2t n push further la.. takkan la ram smpai situ kot??

  Sorry .. typo .. 0.1v

Haiz.. A lot of stressing, testing and setting need to be done today.. I still dunno my mobo's HTT, PSU or PRocessor.. Whichever is holding me back .. Always fail in orthos.. Silverstone SST400 shud be enuff for this rig coz i dun use 8800..

Patient, young overclockers, patient is the key ...

When you're scare ... You're becoming more into the dark side ...

Damn my Tforce550 mobo HT Link damn low only no errors ... Want vomit ... 6xx.. 

Everything maxed leh...
Forget at what volt already.. LEt me recall..
Vcore 1.6v
Chipset 1.7v
HT link 1.4v
Ram 2.1v

Your ram voltage isnt "maxed" yet

---

Added on February 19, 2008, 9:37 pm
Nope, cant increase voltage, but usually brisbane core can reach arnd 2.6-2.8ghz before needing vcore increase. Either way you can increase voltage in windows itself by using applications like crystalcpuID

tight ..put at 5-5-5-5-11, and put at 2.2v
summore 3.0ghz using divider800...
urs is F3 rite.. so no need to worried about high temp.. supose can 3ghz as 24/7

trfc set to 75ns
mal set to 8
if u want more tight just set to 5-5-4-5-11-2T

it is based on my xperience..

no worries.. 2.0 is just enough  .. try first.. who know can run pretty well at ddr-1200

but try to loosen ur timing n other setting.. then u tweak one by one using memset.. if doesnt freeze.. congrat bro..

568?2.0vdimm?thats the power of anny..impressive..

after one day of a very2 tired journey.. this is a pic of my rig (that mobo smells kedai..tarak habuk tau )..
ehem...will the tuniq weight will bend my mobo?

haha..yalor..many people manage to get 2.8Ghz with stock vcore..but i wasn't able to pass Orthos if i leave it vcore at auto..at 1.4V also stucked somewhere at 5~6 minutes..herm..wat could be the prob?could it be the PSU prob?as when i run orthos the +12V is rated at 11.6x..so any advices?I saw my fren's Enermax FMA II is holding at 11.90 during stressing..

y not push it further bro, i'm sure ya f3 is capable of 3.0GHz w/ that kinda voltage. 

3.0GHz (10*300) w/ 667 divider, ram runnin 1000 @ 4/5-4-4-8 is just nice for ya 10 annith imo. 
let see whether i can sell off mine 1st, but d temptation is strong... 

i used this mobo b4.. when low vcore <1.45 will  not have serious v drop problem. but after that will have high vdrop problem.. and i manage to use 667 diver very well, but not 533...

hmm.. i think the problem come from your PSU. coz b4 i used cm extreme 380w, 12v drop alot like 11.6x when full load.. after change to FMA II, it manage to stay at 11.90v at full load..

sound like no hv any hope with it