Wah.. The vcore so low..

his proc, ram, mobo all good.
and he ain't noob

the LED debug shows several number and it keep on like that..no boot at all.not even post.the hdd light and the dvd light just flashing following the rythm on the LED debug..to me,it seems like it keep on rstarting

it's on idle mode rite?look on speedfan indicator cpu core temp already show fire.

using stock?

pls update my result too bro. my updated specs are on my siggie. =D

btw, my vcore i + 0.1v is that ok? anything less and its not sable. =.=''

but my 2.7 can get default vcore tho.

whats the average most ppl can get for my processor on stock voltage ah?


Attached thumbnail(s)

great result
why not try 3GHz? your proc definitely able to do that
i owned a 3600+ once, it can do around the same like yours at stock vcore

p/s: Maybe you should use Super Pi latest version
you can download from here: http://www.xtremesystems.com/pi/super_pi_mod-1.5.zip

This post has been edited by dblooi: Feb 16 2008, 04:48 PM

haha bro. i try edi but so couldnt get it stable. was going to attempt it again but these few days im not feeling so well but i will definitely go for it again in the future.

here is my failed attempt. (can get into windows but unstable)



btw, do u still have any screens to ur highest clock on default vcore for me to refer to? thanks.

This post has been edited by awh85: Feb 16 2008, 04:50 PM

Fear not the power of 1.5V bro awh85 Unless your using the stock cooler

Sifu's, managed to reach DDR2 970 with my team value ram, but havent tested for stability. Tried for DDR2 1000mhz but instantly bsod.



Never really overclocked my ram before so was quite pleased about getting this high . Any advice on getting it stable? My timings are ald in the screenie, and I'm using 2.3v. Cooling is an issue I guess. Comments plz

This post has been edited by joe_star: Feb 16 2008, 05:00 PM

then fear i shall, the power of 1.5V since im using stock cooler =D

any good performing, silent, flexible (can use on lga775 and am2) HSF to recommend me? i might be looking around for to see if i can find any bargains in garage sales =D

Try 1.48V bro awh85

Btw you're using kalakatu's PSU right ? Should be able to achieve 3GHz since he did Or maybe need a proper cooling just in case ?

how unstable it is?
failed orthos?
hmm..the vcore should be sufficient for 3GHz
what's the cooler that you are using now?

btw, sorry bro,
i've lost all my 3600+ SS
but my 3600+ looks quite similiar v yours,
stock vcore 2.85GHz
from your SS , your oc looks good to me

This post has been edited by dblooi: Feb 16 2008, 05:02 PM

ya, i just got his PSU, i like the fan really much, good looking and takes a lot of air out of my system...temps also better already.

ill try it out someday bro, thanks.

Ok........then fear u shall, til you get a new cooler. What are your load temps now? Should be reaching 60 I tink. I'm using tuniq tower atm. With 1.55v @ 3.0ghz the load temp is 50C. But duno can trust the onboard DTS or not. Either way proc is still running so far so ok la . Hmm lastime i was considering getting Evercool Buffalo as it was only arnd RM70 n apparently did a decent job.

---

Added on February 16, 2008, 5:05 pmguys any comments?

This post has been edited by joe_star: Feb 16 2008, 05:06 PM

icic, its ok.

im using stock cooler but cant get 2.85 anyhow with stock voltage, so is it possible the problem there lies in my cooler?

the 3GHz failed coz SuperPi32M will fail after 1 or 2 mins and as wel as orthos failing 1 or 2 minutes into it as well.

besides that, if i open some webpages and listen to some songs or open many things at once, i will auto reboot. =.=''

any HFS which is good performing, silent, flexible (can use on lga775 and am2) and possibly some bling (LED)to recommend me?

awh85, maybe lowering HTT multiplier helps ? Tuniq Tower 120 seems affordable

someone said that Brisbane CPU temp can be trusted, it just the temp on core CPU #1 and CPU #2 cannot be trusted. forgot who said but IINM I did asked last time

@awh. whats ur vdimm? Still default? Nice result there

Edit = timing provided oledi

This post has been edited by za_az: Feb 16 2008, 05:14 PM

my load temps for 1.36 vcore at 2 300x9.5 is around 55c +/- IINM.


btw, can i ask, whats the benefit of OC-ing RAM?



hmm...my RAM at 713, is that considered ok? or can it go higher? if can go higher, can i know roughly how to do it? thanks? btw, my ram voltage as of now is default.

---

Added on February 16, 2008, 5:16 pmvdimm is ram voltage right? stock as of now...which is something like 1.95 if i remember correctly. i din change it.

This post has been edited by awh85: Feb 16 2008, 05:16 PM

EDITED: Hoho he did post for the timing. No vdimm posted before

Based on my exp, cooler just cools down my temp. It doesn't really helps me to go further. Last time with stock HSF I manage to go 2.85GHz stable, same goes now with GeminII. I just need a good PSU to go further

---

Added on February 16, 2008, 5:20 pmOC-ing RAM is for you to determine the RAM max bandwidth. Correct me if I'm wrong.

Or maybe it is unstable due to you didn't pump any vdimm ? Try to pump one or two times only

This post has been edited by afosz: Feb 16 2008, 05:20 PM

Thats good temps bro. Hmm about memory oc-ing, as of now I havent really notcied that much performance improvement except in benchmarks, but I think it will be beneficial in memory intensive apps.

@afosz, my bad din notice his timing Yup, i oso think the vdimm might need 1 step up Maybe 2.1v? Juz my opnion