Yup...Ram timing.
Mine 450w also enough alraedy wor

Ermm...i dun think is stabilizer problem.
I think is mobo problem. Before can do 3.1GHz, now cannot already
Still troubleshooting.

-pWs-

I'm running to dilemma. Biostar TForce 550 seems to have HTT wall at 240 (look at [H] reviews), so I stuck at 2.4GHz, but it seems that if I change motherboard the Windsor F2 don't clock well, but if I change CPU I'll hit 240HTT limit. What should I do?

Haha,i don't have any power supply at the moment.Two months already i didn't play with my rig.

this is my first result, i really need an advice from u guys since this is the first time I play on AM2, too much playing with C2d,

13 hours stable on orthos with this setting but I forgot to take a screen shot, I had to up my vcore until 1.4 to get this freaking stable, fsb set is 287 and running my ram at DDR2 1006, before this I also could get another test rocking stable which fsb set was 284 with only 1.35 as the vcore, is this considered as one of the good chips? thanks for ur feed back guys, enjoying AM2 now..

@anggajaya
Wellcome to the AM2 club.
Nice results for the brisby.

waa...why all other 4000 needs lower voltage than mine?

anggajaya, great result for 4000+ OCing to 3GHz

What RAM did you use ?

Nice results bro

Gong Xi Fatt Chai to all OCer

sempron?? no idea..

can anyone recommend me a dfi mobo ? not too expensive preferably ..
just wanna use it for oc abit and as long its stable then its fine.
anyone ??

AMD news: http://www.digitimes.com/mobos/a20080201PD211.html

-pWs-

I use crucial ballistix pc6400, honestly this ram is not that good... maximum i can achieve is only ddr2 1006, no matter i set up, it will be not stable if beyond that speed, anyone wants this ram? heu2e, pm me

F2 3800+...

i assume these 45nm will be dually core, rite?



what does it means by power consumption of the cache?

cache as processor? or cache as cache?

all these years the significant power drawer are from the cache itself?

if not mistaken..dual and quad core...

Reaching 2.8GHz on 3800+ F2 is great. I only managed a paltry 2.4GHz 1.4V What mobo did you use?

abit KN9S..using stock Vcore..i can get stable 2.5Ghz...

That's very good. I believe it's my CPU that suck at overclock. I achieve the same overclock on ASUS M2N-E. Never in my life I buy such a dumb CPU that won't overclock far. All my other CPU achieves at least 500MHz overclock without voltage increase. Should have buy Brisbane 3600+, but then again, that's my fault not to research before buying

higher than 2.5Ghz i must increase Vcore..damn suck i can get 2.8Ghz with 1.5Vcore

hi, my current setup is as follows:

AMD Athlon64 X2 3600+ AM2 Brisbane with stock cooler.
Biostar T-Force TA690G AM2 (bios is 06/05/07) lol just now i accidently typed 2008.
2GB Kingston Value RAM DDRII 667 (Dual Channel) both hynix HP-Y5
CoolerMaster eXtreme Power 430W


cpu-z with my systemps

im trying to overclock my cpu to 2.5-2.7 level from 1.9. Previously i was using the V12 setting on the Auto Overclock System giving me 240x9.5 = 2280 and it also increases my cpu voltage to 1.312.
now with my own manual overclock using stock cpu voltage (1.280 or something), erm...all the other ht, mem, nb voltage all default la (din play with any voltage). memory i changed to 533, the timings CAS and etc all i left default (auto) the npt fid (divider) i also left default.

basically i din change anything much except the bus (do u call it that for amd) and memory. i cant seem to get it over 245 and duno what the problem is. i dont think its the voltage as it doesnt do much after increase as well. i did manage to get it around 250 but not stable and sometimes didnt POST.

i think it should have something to do with the divider, ht frequency, etc right?

can anyone share some tips on how to get my system higher? (2.5 will do, coz i just wanna beat my friend with a x2 4000+, yea, im kiasu). if can, i dont wanna up the vcore higher than 1.35.

thanks a lot for reading (and helping out if u choose to)

This post has been edited by awh85: Feb 8 2008, 01:52 AM