Current Event : 1st LAN Party


Venue : Being decided, selected venue turned out to be unavailable. Originally Sri Relau complex, 4th floor, directly opposite PISA, near the place where the road splits to Relau.

Date & time : Being decided.

What to bring :
-PCs (none supplied or for rent )
-Snacks and food (stuff that can be cleaned up easily)
-Network cables (I'll bring extra, but better if you can bring your own)
-Extension cords and multiplugs
-Anything else you feel like bringing

How much
-Its just to compensate for electricity cost, should be around RM1-2 per person (assuming 300W/PC (A64 or C2D, single GFX) at commercial rates) for 10 hours)
-extra watt are to compensate for air-con electricity cost
-current electricity cost
-we may need to buy an extra router/switch if can't borrow enough, which probably comes up to RM10-20 per person.

Events
-mostly free gaming, though you can ask in advance for a time slot to do do a special session (OC session or whatever)
-you guys decide what you want to play, and all of us please install ready all the games
-probably spend the first hour setting up the network

What's available (for us to use, that is)
-tables, chairs, whiteboard, air-con
-maybe a water dispenser, but not confirmed
-no routers by default, but I'll bring my own 4 port netgear and the CNet 8 port which was in my garage sales
-I have permission to log onto the wireless network next door, but unfortunately I can't get permission for you guys, so if you need to go online you have to use my PC

What I need to know from you guys
-who is coming
-what are you bringing (food, games, extra routers, ect)
-what time are you coming and how long can you stay
-what do you want to play
-anything else?

Any questions, you can ask here or contact me at 016-4936208


Intro

With tribute to our founder, Acecombat (or KC, as some know him), I'm starting a new thread for POC as he will no longer be mantaining the old one. I'm lohwenli, you can call me Jaryl if you want. I'll be mantaining this new thread, but I'm not the leader of POC, (unless you want me to be ).

(mostly copied from previous thread)

Welcome to Penang's Overclocker Club official thread V2!!!!

Previous thread can be found here-
P.O.C thread V1 2200 reply with more than 18000 times viewed.
P.O.C thread V2 over 1600 replies and 17000 views

Enjoy your stay over here and feel free to discuss everything about Penang and about PC stuffs.

Rules
Strictly no SPAMMING over here,once found,u will be reported to the Admin and u will be suspended.

Business and promoting are allowed in this new thread!!!

Anyone may post here, you don't have to be from Penang. However, most of the discussion here will be heavily Penang-related (eg. PC shops in Penang). Other topics are also ok, but try to keep it PC related

This post has been edited by lohwenli: May 16 2008, 08:48 AM

grats to v3...is very fast

OC database
Last updated : 2nd January 2008

If you want to be in the database, submit your screenshot (showing CPU-Z & at least one of the stress tests), and one and info in the following [/I]manner :-

Nickname : Proc (including core name & revision) : Proc Speed & Vcore : Mobo : Ram : Ram Speed, timing & Vdimm: CPU Cooling

for example
lohwenli : Pentium 4 2.8Ghz (Northwood M0) : 3500Mhz@1.525vcore : Abit IS7 : OCZ Platinum EL DDR400 : DDR500@2.5-3-3-7, 2.8vdimm : Generic Thermaltake heatsink

To be in the database either:-
1. Penang is your hometown
2. you stay in Penang for long term (Study or work here)
And of course you must overclock la..anything more than the default setting counts, even if its just a 1 Mhz fsb increment.

Stress tests required for verification (need 1 at least to be in verified list, with exception of record runs using either normal ice, dry ice & LN2)
1. 1 hour prime95/orthos (1 instance per core for prime, 1 instance per 2 cores for orthos)
2. 32M super pi (1 instance per core, not counted if stress test takes less than 30 mins)
3. 1 hour OCCT (this may be revised to 30 mins)
4. Other stress tests may also be accepted, as long as they can stress ALL cores 100% and are at least 30mins-1 hour long. List will be added as necessary.
OCs which are verified stable 24 hours or more will receive special mention

Overclocks in purple are 24hours stable
Record runs using normal ice, dry ice or LN2 (basically any cooling that cannot last) will be listed in bold
Overclocks not verified with a screenshot of at least one stability test mentioned above are listed in italics and in event of ties will be placed below other overclocks (I will update as overclocks are confirmed, still scanning through the V1 & V2 threads for previous screenshots, help me out by pointing to your own ok)


Intel Core microarchitecture

Core 2 Quad (65nm)
AceCombat : Core 2 Quad Q6600 (Kentsfield G0) : 3970Mhz@1.60Vcore : Asus P5K Premium : Gskill DDR800 (model unknown) : DDR880@5-5-5-15 2T, unknown vdimm : CPU Cooling unknown
zeustronic : Core 2 Quad Q6600 (Kentsfield, revision unknown) : 3960Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown
AceCombat : Core 2 Quad Extreme Edition QX6700 (Kentsfield, revision unknown) : 3690Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown
intothefantasy : Core 2 Quad Q6600 (Kentsfield, revision unknown) : 3600Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown
k8118k : Core 2 Quad Q6600 (Kentsfield, revision unknown) : 3200Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown

Core 2 Duo & Pentium Dual Core (65nm)
warrior : Core 2 Duo E6600 (Conroe, revision unknown) : 4030Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown
cschun86 : Intel C2D E6750 (G0 stepping) : 3.7Ghz @ 1.392V : Gigabyte P35-DS3 rev 1.0 : Gskill PC8000 DDR2 1000mhz 4Gb Kit : 926mhz , 5-5-5-10@ 2.1V : Thermalright Ultra 120 Extreme & Thermalright HR-05 SLI/IFX
gsan: Intel C2D E6550 ( Conroe G0 ) : 3600MHz @ 1.32vcore : DFI LP DK P35-T2RS : 2x1gb Crucial 10th Anni ddr2 667 : DDR1028 @ 4-4-4-12, 2.3vdimm : Xigmatek S1283
neoxz : Core 2 Duo E6600 (Conroe, revision unknown) : 3500Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown
cschun86 : Core 2 Duo E6600 ES (Conroe B0) : 3200Mhz@1.40Vcore : Gigabyte P35-DS3 : Gskill DDR800 : DDR1068@5-5-5-15 2T, 2.1Vdimm : CPU Cooling unknown

danieljoey : Core 2 Duo E6600 (Conroe, revision unknown) : 3200Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown
horphi : Core 2 Duo E6300 (Conroe, revision unknown) : 3150Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown
PGV3910 : Pentium Dual Core E2140 (Conroe, revision unknown) : 3160Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown
michealelsie : Core 2 Duo E4300 (Allendale, revision unknown) : 3000Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown
KucingFight : Pentium Dual Core E2140 (Conroe, revision unknown) : 3000Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown
NSR : Core 2 Duo E4400 (Allendale, revision unknown) : 2000Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown


Intel Netburst microarchitecture

Pentium D (65nm)
pmmonkey : Pentium D 930 (Presler B1) : 4005Mhz@1.25vcore : Abit IP-35E : Kingston Valueram DDR2 667 : DDR2 800@5-5-5-15 2T, 1.85Vdimm : Thermalright SI-128
pmmonkey : Pentium D 930 (Presler B1) : 3300Mhz@1.25vcore : Intel D945GNT : Kingston Valueram DDR667 : Ram Speed, timing & Vdimm unknown : Thermalright SI-128
Fyonne : Pentium D 915 (Presler, revision unknown) : 3360Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown

Pentium 4 (90nm)
DraGGarD : Pentium 4 630 (Prescott, revision unknown) : 3200Mhz@unknown Vcore : Abit IP-35E : Ram unknown : Ram Speed, timing & Vdimm unknown : Noctua NH-U12F

Pentium 4 (130nm)
lohwenli : Pentium 4 2.8Ghz (Northwood M0) : 3500Mhz@1.525vcore : Abit IS7 : OCZ Platinum EL DDR400 : DDR500@2.5-3-3-7, 2.8vdimm : Generic Thermaltake heatsink
DraGGarD : Pentium 4 2.4c (Northwood, revision unknown) : 3300Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown


AMD K8 Microarchitecture

Athlon64 X2 Dual Core socket AM2 (65nm)
Powerslide : Athlon64 X2 3600+ AM2 (Brisbane G1) : 3000Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown

Athlon64 X2 Dual Core socket AM2 (90nm)
rainingzero : Athlon64 X2 3800+ AM2 (Windsor F2) : 2700Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown
Tachlio : Athlon64 X2 3800+ AM2 (Windsor F2) : 2500Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown
tapirus : Athlon64 X2 3800+ AM2 (Windsor F2) : 2480Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown

Athlon64 X2 Dual Core socket 939 & Opteron Dual Core socket 939(90nm)
Gsan : Athlon64 X2 3800+ 939 (Toledo E6) : 2900Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown
LittleLinnet : Athlon64 X2 4400+ 939 (Toledo E6) : 2310Mhz@1.4V Vcore : MSI K8N Neo4 Platinum : AENEON DDR400 1GB*2 : 210MHz, 2.5-3-3-7 & Vdimm@2.65V : Actic Cooling Freezer 64 Pro
overclockalbert : Opteron 170 939 (Denmark, revision unknown) : 2500Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown

Athlon64 single core socket 939/754 & Opteron single core socket 939(90nm)
ktek : Opteron 144 S939 (Venus, revision unknown) : 2700Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown
olcheong : Athlon 64 3000+ s939 (Venice, revision unknown) : 2600Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown
eeor83 : Athlon 64 3000+ s939 (Venice, revision unknown) : 2450Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown
@meno : Athlon 64 3000+ S939 (Venice, revision unknown) : 2250Mhz@unknown Vcore : DFI Lanparty NF4 Ultra-D : OCZ Platinum EL DDR400 : Ram Speed, timing & Vdimm unknown : Thermalright XP-90
PeterMaw : Athlon 64 3200+ S939 (Venice, revision unknown) : 2100Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown


Athlon64 single core socket 939 & Opteron single core socket 939(130nm)
TrOwA008 : Athlon 64 3200+ s939 (Winchester D0) : 2500Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown
speedrider : AMD64 3200+ (Winchester) : 2340Mhz@1.60 vcore : Abit AN8 Fatal1ty SLi : KVR DDR400 : DDR428@3-4-4-8, 2.8vdimm : Stock heatsink

AMD K7 Microarchitecture and earlier
AthlonXP (130nm)
TrOwA008 : Athlon XP 2400+ (Thoroughbred B, revision unknown) : 2200Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown

Statistics
32 Overclocks total in database

This post has been edited by lohwenli: Feb 6 2008, 05:44 PM

Teh Tarik Section (previous events)

V1:Completed
Date: 20 October 2007
Venue: One-Stop Complex
Time: 2pm until 7pm


From left:
neoxz, cch2007, powerslide, AceCombat, sonicscourge, @meno, shawnlut , lohwenli, NSR


we're having lunch together
V2:Completed
Date:29 November 2007
Venue:Green Lane McD
Time:8.30pm-11.30pm
Objective:knowing new friend and COD F3

we didnt take any pictures due to dark environment and actually.........................................we forgot.

1st OC party



This post has been edited by lohwenli: Apr 15 2008, 03:16 PM

Will clean up the top threads tomorrow, have to sleep already..
(falling sick )

Waaa... still put the pic meh? My hair also long until need to cut d

wah new thread new leader?

Grats for V3,
we have new thread leader,
not POC leader >.<

hope all will enjoy new thread leader
add me in the name list, i study at USM Engineering campus
later will add on my pc bcau "in progress built"

v3

so malu see the photo

use photoshop then send the pic to me

Yup, cos Ace not available to mantain any more.

I'll add you to our contact list, but you won't be in the OC list until you post your OC screenshot.

wow...this thread become hot and spicy now meh. Anyway, anyone got deal with the person than sell QX6850 at RM 1000?

Hmm, I also wish to know who is the buyer ^,^

Jaryl,
The OC database seriously needs update...
All POC members who have change in information, please update ur info here in the thread to make it easier for Jaryl to do the update.

Btw, i'm proposing a new format for the OC database.
Nickname:Proc:Mobo:Ram:Proc Speed:Ram Speed:Vcore:Vdimm: Cooling Device(eg-model of hsf, watercooling)

This will make a more complete list for everyone's reference.

grats to new leader lohwenli

This post has been edited by danieljoey: Dec 30 2007, 01:02 PM

Guys, anyone has a spare HDD for loan?
I need something around 20gb only.

Wanna try install windows and see hwo far the F3 can go.
Need to wait until i have my rams and cooler+fans with me before fully migrating to the new platform. My good old venice still needs to run for the mean time for me to browse POC Thread...

i just buy a new 320Gb will reach on 2molo, if can i will borrow u that 20Gb guy

---

Added on December 30, 2007, 6:05 pmsure bro got it
will send it 2 u after New Year

This post has been edited by pokok86: Dec 30 2007, 06:05 PM

did u guys gte my OC screenshot in the V2 of this thread

waa..new tread already..hahaha..good luck!!!

got new proc but maybe cant oc much since juz use cheapo mobo...
actually ..maybe will retire very soon..haha..budget very tight..can't do anything..so juz keep everything in stock..

This post has been edited by verz84: Dec 30 2007, 08:02 PM

Gonna retire? then sell to me ur stuffs. I've actually manage to sell off quite a number of my pcparts. Now only left the graphics card, which I think it's time to drop the price abit.

why new thread not as active as the old thread?

---

Added on December 30, 2007, 9:41 pmplease kindly add in my amd specs
Athlon XP 2100+ @ 2.18ghz 16*136mhz / stock vcore

This post has been edited by danieljoey: Dec 30 2007, 09:43 PM

mabe everybody is busy...2moro monday mar..pack all the books and make sure bring all the pencil case..prepare for school 2moro!!!!

This is near end of 2007 mah,
everyone taking the lift left for this year,
hope to get continuous holiday,
thats why not much ppl reply in the thread lo...

It's very common that LYN is not as active on weekends...Dunno why, maybe most people online from office...

Hmm, I think the reason not so much ppl online is because,
everyone went out expecially friday and saturday night,
and sunday night everyone sleep early for monday working...

usually weekdays night are quite active one...

oh finally back online..
just now looks like ghost thread..

i got no where to go..always here to kacau or help forumer

yeah...V3 already..gud luck to our TS...

got another 1 forumer from eng campus..can we do TT again for eng campus before go to island for our V3 TT...

will update my f3 and intel oc data...

Mr. Loh still havent add in my AMD specs

give him more time lor..not always in front of pc...so stay tuned..

This may be the reason - as stated in the first page "Strictly no SPAMMING over here,once found,u will be reported to the Admin and u will be suspended"

Me non-POC member lagi takut....

hai morning to every
ned some suggestion for my PSU

my rig is as below
P: E6550
GC: HD3870
Mobo: P35-DS3
Hdd: 320Gb(sata 2)
Ram: Crucial Ballistix Tracer PC6400 2GB Kit
Rom: Pioneer DVD/CD writer

tq
* how many W PSU that i ned 4 future upgrade to Q6600?

haha..i report u ad...

so u already grab ur Q6600???

what ur current psu???i think 560W more then enuf to power up ur rig..

mine using ST56F can power up my intel rig ad...

yeah, 550watt and above is enough already. can also ask sukhoi37, he is using 550watt if i'm not mistaken. powering his q6600, and 3870 CF mode...

Haha.... decided to wait for penryn instead..... Q9450

Edit : Ooopsss, my friend forgot to log out! kmarc here.....

This post has been edited by lim5659: Dec 31 2007, 11:53 AM

I tot why POC suddenly become Liverpool Discussion Thread...

*Torres rawks...But stupiak, 0-0 draw with MC...

Maybe can have another TT,
but classes is start and the assignment and lab repost have to start doing already...

Besides that, you guy saw shawty memory bulk?
http://forum.lowyat.net/topic/597115

omfg damn tempting...
he is just release another poison bomb to us >.<
does we really need 4gb?
thinking to cancel my mind to swap ram instead of sell it,
and then swap to this new 4gb babe...

Hi,i'm from penang and willing to join POC as stated,can i?
anyway,i tested 4GB and 2GB in every application and game,in game,nothing much improved,same fps,just waste of money from 2Gb to 4GB,cause until today all games can uilize with 2GB only.
anyway,i'm using QX6850 @ 3.825GHz,i just came back from Germany.

O .... one more POC high end user. Welcome To POC Paradise.
But im not POC member , just come here to Kacau nia.

I also did tested on both capacity and furthermore with 4 X 1GB and 2 X 2GB ( Current). From my result, there is very2 tiny improved but in term of stability, I found that 4GB (2X2GB) would be less hassle than 4 X 1GB.

For games that really demand RAM such as COH for instance, there will be less burden of memory if you set the graphic setting to its fullest rather than using 2GB where it will utilize almost all your RAM for the game alone. You cans ee the right bottom bar in the setup page of the COH graphic setup for this.

anyway, the higher rams capacity, is better. moreover, rams price cheap2 already. are u using DDR3?? if like that, must cost a bomb..
games nowadays just utilize 2gb of rams. its more than enough already. but for building a server, higher than 2gb is recommended...

edit: are u from penang?? post ur ocing result screenshot here, can be part of our member. make sure u are able to join our TT..

This post has been edited by rainingzero: Dec 31 2007, 02:49 PM

yup,when come to overclocking,4x1GB definitely worse than 2x2GB,but compare 2x2GB with 2x1GB,2x1GB easier to overclock,
i running 8800 ultra SLi in Germany with my rig which is QX6850,all in Germany,so right now i cant have the screenshot to u guys.


yup,i using one Striker II Formula and one Blitz Extreme,using DDR3 now from Team Xtreem,i bought from newegg is not so expensive.
i unable to join TT,cause i will go back to Germany on tuesday.

hmm, for XP of course 2GB is enough already,
but for future Vista use,
is it Vista able to ultilise 4Gb Ram?

Yes if it's 64bit vista.

wow..super high end la that guy....wonder how much is his whole setup costs...

if compare to mine..

wah high end user from Germany

XP/Vista 64bit can fully utilise 4GB ram de...

Agreed, though I suggest a slight change in the order
Nickname : Proc : Proc Speed : Vcore : Mobo : Ram : Ram Speed & timing :Vdimm: Cooling Device(eg-model of hsf, watercooling)

for example
lohwenli : Pentium 4 2.8Ghz (Northwood M0) : 3500Mhz@1.525vcore : Abit IS7 : OCZ Platinum EL DDR400 : DDR500@2.5-3-3-7, 2.8vdimm : Generic Thermaltake heatsink

I'm gonna dig through the old V2 & V1 threads over the next few weeks to find those missed out.

Well, actually we're not that strict..as long as nobody gets pissed off..I for one do not like it when there's a whole bunch of pointless posts..lose track of what we're discussing about..

I'll start a side list of those who haven't sent in their screenshots.

Welcome, the more the merrier.

Got my mobo... gonna play abit of oc since no date for new year.

Amd_hardcore : Core 2 Duo E6300 (Allendale C0) : 3000Mhz@1.525vcore : Biostar P965 T-Force : Kingston Value Ram 2 x 1 GB 667Mhz : DDR2 - i dun touch the timing : SWIFTECH APOGEE GT ~ SWIFTECH 120MM X 2 RADIATOR ~ OEM GIGABYTE PUMP ~ OEM GIGABYTE RESEIVOIR ~ CLEARFLEX 60 TUBING

if got TT , pm me...

This post has been edited by amd_hardcore: Dec 31 2007, 11:29 PM

happy new year to all POC member

Happy New Year P.O.C
Mr.Loh update my AMD already?

Happy New Year!!!

well,this is my second rig pic that in my handphone.

It's:
Intel Core 2 Quad QX6800 G0 @ 3.6GHz 450*8 1.435vcore
Thermalright IFX-14 with Nidec Beta V with Artic Cooling Mx-2
BFG N680i SLi rev.A1 replaced MX-2 to all bridges
Crucial Ballisitx Tracer 1066MHz 4x1GB @ 900mhz 3-4-3-8 2.4vdimm
BFG nVidia 8800 Ultra SLi 680MHz/2200Mhz with Thermalright HR-03 with Artic Cooling MX2 with Vizo Vantec LED fan
Be Quiet! 850W Real Power PSU
Western Digital Raptor 150GB x4 RAID Zero
Dell 2707WFP LCD 1920*1200
Razer Lachesis
Saitek Eclipse I Red Edition

anyway,tested my rig able to run Crysis retail version with full resolution and max setting.

Main rig i'll upload when i back to Germany

aiyyooo... dream pc ka...

hehehehe

WOAH !!! thats AWESOME !!!

---

Added on January 1, 2008, 1:20 am8800 ULTRA SLi..... kc you've got an competitor

This post has been edited by danieljoey: Jan 1 2008, 01:20 AM

wow... thats cool...
new year count down I got no date too,
start to clean my V2000 and job done now,
just left the last part --> paste the acrylic...

btw, any USM eng campus POC member have high cfm fan wana sell?
I am looking for 1 or 2 maybe...

i got 2 80mm 4800rpm fan wanna sell...
fan grill included and four rubber mounting screw..

---

Added on January 1, 2008, 1:32 amit looks like vizo windstorm

This post has been edited by danieljoey: Jan 1 2008, 01:32 AM

pm me the best price of it,
where you can COD?
and also let me know the noise level of them fan...

80mm actually is optional for me,
120mm is the one I am looking for...

we discuss in pm...

wormy

nice rig man

cschun,

click my siggy 120mm high speed fan

Thanks,i won some hardwares of it from gaming competition last time by BFG,so u can see most of my hardwares from BFG.

anyway,i believe there is some forumer from penang have higher end rig than mine,who is KC btw?

OMG, your rig really damm powerful~

KC is the previous POC's leader, 17year old "ladies" sexy + cute.

u can try search Acecombat that is him~

This post has been edited by Complete: Jan 1 2008, 11:18 AM

ur rigs really damn nice lor... 4 x 150Gb raptor somemore. me wanna buy 34gb raptor also cant afford...
my upgrade this sem hold due to financial prob. have to stick to current rig...

her la....not him...

if u want high cfm fan i have choice for u..

try Delta AFB1212SHE 120x38mm Super High Speed... Link

i want buy it this friday from bombman..i already reserve 4 for me..2 of them is mine..another 1 my fren..and 1 more left in case my fren want it to..if u want i can sell it to u..

this very good fan..152cfm 3700 rpm..bombman can make us controller if u want to control from lowest to highest speed..but 1 controller for rm20...if u buy 2 fan and custom made controller for both just add rm20..

but me and my fren want try mod by ourself that controller...might try 1st..just copy from my previous delta fan that have controller too...if u can mod byself it much better..we just buy controller...u can come to my room see that controller if u want...

that fan cost RM45...

BTW did u know how to mod acrylic??i want make 2 blowhole for cool my gc...using that fan...

KC is AceCombat Ex P.O.C Leader....

New year, new board, new oc result.


Jeng jeng jeng jeng... a newbie's work!!



pmmonkey : Pentium D 930 3.0GHz : 3750MHz@1.25vcore : Abit IP35e : KVR DDR2 667: never touch ram settings... 5-5-5-15 : TR SI-128

Ok, now need to learn how to kacau the ram timings and other things.

This post has been edited by pmmonkey: Jan 1 2008, 02:57 PM

KC is a girl? unbelievable,then i really her.
anyway,i going back tommorow.

She was Leader for u guys last time?then what happened to her right now?
i searched about her but found nothing,but i saw she sold all her SLi,cross-fire,X38,Core Extreme,now using DDR3 with Maximus Extreme?

cause i saw her signature there,it has one Maximus Extreme.

What is the price for the fan only?
let me know the price of 1 unit and 2 unit...

What I drolling now is the metalzone bulk fan,
120mm x 25mm, 72cfm+-, 35db+-
the price at RM25 only...

I already have self-modded fan controller,
and it is faulty right now,
later if I got time, will make another one....

---

Added on January 1, 2008, 4:09 pmactually is he lar...
all the POC member are male one,
just only one day why they siao siao,
all said change to female tag

This post has been edited by cschun86: Jan 1 2008, 04:09 PM

good if u already have...can show me.. i want make 1..

1 for rm45
2 for rm90

i will try ask him discount coz buy lot from him..will update u later..if u want tell me before this friday..so i can collect for u also...

I just tested the fan controller,
seems like it doesnt working >.<
duno wats wrong with it,
will check it later,
btw, the fan controller is come together with the casing...

if this one spoil,
maybe later will figure out new circuit and design one myself later...

@cschun86
ok..me also just copy from previous one..

@acecombat
did u have any cooler for sale???

lol...
I am lazy to design one,
but have to use simulation program to test it 1st,
dun wan simply make a failure item

Updated the requirements for the OC database, there will be a seperate list for verified and unverified overclocks. A copy is here for those lazy to read the front page.

If you want to be in the database, submit your screenshot (showing CPU-Z & at least one of the stress tests), and one and info in the following manner :-

Nickname : Proc (including core name & revision) : Proc Speed & Vcore : Mobo : Ram : Ram Speed, timing & Vdimm: CPU Cooling

for example
lohwenli : Pentium 4 2.8Ghz (Northwood M0) : 3500Mhz@1.525vcore : Abit IS7 : OCZ Platinum EL DDR400 : DDR500@2.5-3-3-7, 2.8vdimm : Generic Thermaltake heatsink

To be in the database either:-
1. Penang is your hometown
2. ypu stay in Penang for long term (Study or work here)

Stress tests required for verification (need 1 at least to be in verified list, with exception of record runs using either normal ice, dry ice & LN2)
1. 1 hour prime95/orthos (1 instance per core for prime, 1 instance per 2 cores for orthos)
2. 32M super pi (1 instance per core, not counted if stress test takes less than 30 mins)
3. 1 hour OCCT (this may be revised to 30 mins)
4. Other stress tests may also be accepted, as long as they can stress ALL cores 100% and are at least 30mins-1 hour long. List will be added as necessary.
OCs which are verified stable 24 hours or more will receive special mention


Do me a favour and give me your spec again

This post has been edited by lohwenli: Jan 2 2008, 04:35 AM

Haha, mine will be later,
wana swap ram with ppl 1st,
then will test how far it can go...

AMD Athlon XP 2100+ 136*16=2.18ghz stock vcore

still not enuf...give him more detail like he mention



easy for us to in case need it as reference...

Made some minor corrections to the OC requirements, all specs mentioned are now required (you can include other things if you want). Was typing in a hurry earlier.
Thinking of starting a list for GPUs as well, how about it?

hmm, GC can be included also,
but I think need to do a seperate list...
coz not everyone OC GC...

Hehe... my pentium D rawks.
4005MHz and increasing. Then will leave for 24hrs.
2 oc attempts a day, lets see how far can this baby D can go on normal hardwares.



This post has been edited by pmmonkey: Jan 2 2008, 10:48 AM

damn, 4ghz already?

u guys on intel looks like have some good fun ocing

cschun,

where is the pic of ur v2000?

I'm not sure about that, anyway to be a member you just need to OC something, doesn't matter what. Thing is, listing for GC OC is different from CPU OC (it'll be something like Core/Shader/Memory. Also thinking of a benchmark database.

Nasty... Will update when you're done.

My crappy oced 3800+ F2:

Orthos:


SuperPI:

SuperPI done a few weeks ago. lazy to run SuperPI again...

Rainingzero : AMD X2 3800+ (Windsor F2) : 2800Mhz@1.55vcore : Asus M2N-E : Micron D9DPN : DDR700@4-4-4-12, 1.95vdimm : AC Freezer 64 Pro

This post has been edited by rainingzero: Jan 2 2008, 12:41 PM

later >.<
coz still not put the things inside,
and haven paste the acrylic up...
and have to get fan 1st...

too bad metalzone like on vacation,
didnt online for few days >.<

guys, im on a p35-ds3 rev 2.0 with e4300 and 2gb 667 kingston value rams
i want to oc my proc to be 3ghz and fix my mem to 667 ... how ?
coz right now i'm limited by the oc'ing ability of the mem ..

i cannot manually set fsb and mem speed asynchronously ah?

This post has been edited by mmohdnor: Jan 2 2008, 04:24 PM