lol... you wait cschun86 sleep at night then you curi curi go his room take out his psu lo

just got 2900gt and now wanna get 3850 ? damn rich la u...

dont kesi kesi here la.. i know your coming rig quite powerful

just finish installing the new mobo, will tweak it later

tested on P35-DS3, full load @ 3.3GHz, 54~56'c but today changed to DK P35 T2R-S, the heatsink installed at horizontal position because crash with the NB heatsink, full load 66~68'c

cannot tell, secret

visit your house better la, got many high end stuff

din try the max, now I wanna change my NC-U6 into this mobo and try to install the heatsink in vertical position, the temp really rise a lot

this mobo really got many OC option compare to DS3... have to spend time to tweak with it

nvm, my father's rig put at my housetown

I would recommend go for Tower 120... I bought this S1283 last time because I did not notice that there is another bulk selling Tower 120... If I know it, sure I will go for Tower 120

---

Added on January 5, 2008, 1:25 pmgsan: Intel C2D E6550 ( Conroe G0 ) : 3306MHz @ 1.38vcore : DFI LP DK P35-T2RS : 2x1gb Crucial 10th Anni ddr2 667 : 472 @ 4-4-4-12, 2.2vdimm : Xigmatek S1283

additional info:
this E6550 is based L726B batch, retail unit. and the ram is based D9GMH chipset. NB changed to NC-U6 and the S1283 installed at vertical position, original fan come with S1283 running at full speed, ~2100rpm

vcore reading:
bios set | bios reading | cpu-z reading (idle/load) | SG reading (idle/load)
1.38v | 1.38v | 1.376v/1.376v | 1.37v/1.37v

vdimm reading:
bios set | bios reading | SG reading (idle/load)
2.2v | 2.2v | 2.19v/2.17v



This post has been edited by gsan: Jan 6 2008, 01:35 AM

I believe tower 120 is perform better than s1283... btw, it is at normal room temperature, no air-cond, side panel closed.

FYI, at first, I installed the s1283 horizontally because if at vertical position, it will crash with the NB heatsink. but the temperature damn high, 66~68'c during full load.

This post has been edited by gsan: Jan 5 2008, 09:03 PM

http://forum.lowyat.net/index.php?showtopi...7&hl=windwithme

yeah... the power of 4 phase digital PMW + 16 MOSFET

your S1283 installed vertically or horizontally? now I change to vertically, temperature back to normal, 3.3GHz full load @ 54~56'c

bro, could you post a screenie of core temp for your E6600?

This post has been edited by gsan: Jan 6 2008, 02:52 AM

the value of the VID

as I said before during TT last time, nowadays Intel proc no longer produce the same VID a.k.a vcore for every same eg. E6750. last time all the proc eg. P4 2.4C have the same default vcore, but now, not every E6750 got the same vcore, eg. some is 1.325v, some is 1.350v. that's why on the box you'll see it label max 1.35v for the proc

the DK NB heatsink is a bit taller, that's why crash with S1283. but tower 120 is taller than the NB heatsink, I guess it wont have any problem during installation.

bro, here is the screenie, 476 @ 4-4-4-8 and still priming. actually there is a lot of dram tweaking option on DK P35, but I set the main timing only, the rest left with Auto.

btw, how's your new intel rig?

haha... lazy to take off and install the heatsink already... but anyway, thanks ya

tonight I got discussion @ 9pm, after finish it, will take the mobo for you.

ya, it is standard, push-pull type.

EIST and C1E disable?

@tapirus

nice oc result... btw is it prime stable?

pokok86 also rich la... his new intel rig is almost complete... hehe

you also from usm? main campus? btw, what proc you're going to pair with this DK P35?

dont kesi kesi here la why you dont post your items screenie at the BUY CLUB there?