Current Event : 1st LAN Party


Venue : Being decided, selected venue turned out to be unavailable. Originally Sri Relau complex, 4th floor, directly opposite PISA, near the place where the road splits to Relau.

Date & time : Being decided.

What to bring :
-PCs (none supplied or for rent )
-Snacks and food (stuff that can be cleaned up easily)
-Network cables (I'll bring extra, but better if you can bring your own)
-Extension cords and multiplugs
-Anything else you feel like bringing

How much
-Its just to compensate for electricity cost, should be around RM1-2 per person (assuming 300W/PC (A64 or C2D, single GFX) at commercial rates) for 10 hours)
-extra watt are to compensate for air-con electricity cost
-current electricity cost
-we may need to buy an extra router/switch if can't borrow enough, which probably comes up to RM10-20 per person.

Events
-mostly free gaming, though you can ask in advance for a time slot to do do a special session (OC session or whatever)
-you guys decide what you want to play, and all of us please install ready all the games
-probably spend the first hour setting up the network

What's available (for us to use, that is)
-tables, chairs, whiteboard, air-con
-maybe a water dispenser, but not confirmed
-no routers by default, but I'll bring my own 4 port netgear and the CNet 8 port which was in my garage sales
-I have permission to log onto the wireless network next door, but unfortunately I can't get permission for you guys, so if you need to go online you have to use my PC

What I need to know from you guys
-who is coming
-what are you bringing (food, games, extra routers, ect)
-what time are you coming and how long can you stay
-what do you want to play
-anything else?

Any questions, you can ask here or contact me at 016-4936208


Intro

With tribute to our founder, Acecombat (or KC, as some know him), I'm starting a new thread for POC as he will no longer be mantaining the old one. I'm lohwenli, you can call me Jaryl if you want. I'll be mantaining this new thread, but I'm not the leader of POC, (unless you want me to be ).

(mostly copied from previous thread)

Welcome to Penang's Overclocker Club official thread V2!!!!

Previous thread can be found here-
P.O.C thread V1 2200 reply with more than 18000 times viewed.
P.O.C thread V2 over 1600 replies and 17000 views

Enjoy your stay over here and feel free to discuss everything about Penang and about PC stuffs.

Rules
Strictly no SPAMMING over here,once found,u will be reported to the Admin and u will be suspended.

Business and promoting are allowed in this new thread!!!

Anyone may post here, you don't have to be from Penang. However, most of the discussion here will be heavily Penang-related (eg. PC shops in Penang). Other topics are also ok, but try to keep it PC related

This post has been edited by lohwenli: May 16 2008, 08:48 AM

OC database
Last updated : 2nd January 2008

If you want to be in the database, submit your screenshot (showing CPU-Z & at least one of the stress tests), and one and info in the following [/I]manner :-

Nickname : Proc (including core name & revision) : Proc Speed & Vcore : Mobo : Ram : Ram Speed, timing & Vdimm: CPU Cooling

for example
lohwenli : Pentium 4 2.8Ghz (Northwood M0) : 3500Mhz@1.525vcore : Abit IS7 : OCZ Platinum EL DDR400 : DDR500@2.5-3-3-7, 2.8vdimm : Generic Thermaltake heatsink

To be in the database either:-
1. Penang is your hometown
2. you stay in Penang for long term (Study or work here)
And of course you must overclock la..anything more than the default setting counts, even if its just a 1 Mhz fsb increment.

Stress tests required for verification (need 1 at least to be in verified list, with exception of record runs using either normal ice, dry ice & LN2)
1. 1 hour prime95/orthos (1 instance per core for prime, 1 instance per 2 cores for orthos)
2. 32M super pi (1 instance per core, not counted if stress test takes less than 30 mins)
3. 1 hour OCCT (this may be revised to 30 mins)
4. Other stress tests may also be accepted, as long as they can stress ALL cores 100% and are at least 30mins-1 hour long. List will be added as necessary.
OCs which are verified stable 24 hours or more will receive special mention

Overclocks in purple are 24hours stable
Record runs using normal ice, dry ice or LN2 (basically any cooling that cannot last) will be listed in bold
Overclocks not verified with a screenshot of at least one stability test mentioned above are listed in italics and in event of ties will be placed below other overclocks (I will update as overclocks are confirmed, still scanning through the V1 & V2 threads for previous screenshots, help me out by pointing to your own ok)


Intel Core microarchitecture

Core 2 Quad (65nm)
AceCombat : Core 2 Quad Q6600 (Kentsfield G0) : 3970Mhz@1.60Vcore : Asus P5K Premium : Gskill DDR800 (model unknown) : DDR880@5-5-5-15 2T, unknown vdimm : CPU Cooling unknown
zeustronic : Core 2 Quad Q6600 (Kentsfield, revision unknown) : 3960Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown
AceCombat : Core 2 Quad Extreme Edition QX6700 (Kentsfield, revision unknown) : 3690Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown
intothefantasy : Core 2 Quad Q6600 (Kentsfield, revision unknown) : 3600Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown
k8118k : Core 2 Quad Q6600 (Kentsfield, revision unknown) : 3200Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown

Core 2 Duo & Pentium Dual Core (65nm)
warrior : Core 2 Duo E6600 (Conroe, revision unknown) : 4030Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown
cschun86 : Intel C2D E6750 (G0 stepping) : 3.7Ghz @ 1.392V : Gigabyte P35-DS3 rev 1.0 : Gskill PC8000 DDR2 1000mhz 4Gb Kit : 926mhz , 5-5-5-10@ 2.1V : Thermalright Ultra 120 Extreme & Thermalright HR-05 SLI/IFX
gsan: Intel C2D E6550 ( Conroe G0 ) : 3600MHz @ 1.32vcore : DFI LP DK P35-T2RS : 2x1gb Crucial 10th Anni ddr2 667 : DDR1028 @ 4-4-4-12, 2.3vdimm : Xigmatek S1283
neoxz : Core 2 Duo E6600 (Conroe, revision unknown) : 3500Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown
cschun86 : Core 2 Duo E6600 ES (Conroe B0) : 3200Mhz@1.40Vcore : Gigabyte P35-DS3 : Gskill DDR800 : DDR1068@5-5-5-15 2T, 2.1Vdimm : CPU Cooling unknown

danieljoey : Core 2 Duo E6600 (Conroe, revision unknown) : 3200Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown
horphi : Core 2 Duo E6300 (Conroe, revision unknown) : 3150Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown
PGV3910 : Pentium Dual Core E2140 (Conroe, revision unknown) : 3160Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown
michealelsie : Core 2 Duo E4300 (Allendale, revision unknown) : 3000Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown
KucingFight : Pentium Dual Core E2140 (Conroe, revision unknown) : 3000Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown
NSR : Core 2 Duo E4400 (Allendale, revision unknown) : 2000Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown


Intel Netburst microarchitecture

Pentium D (65nm)
pmmonkey : Pentium D 930 (Presler B1) : 4005Mhz@1.25vcore : Abit IP-35E : Kingston Valueram DDR2 667 : DDR2 800@5-5-5-15 2T, 1.85Vdimm : Thermalright SI-128
pmmonkey : Pentium D 930 (Presler B1) : 3300Mhz@1.25vcore : Intel D945GNT : Kingston Valueram DDR667 : Ram Speed, timing & Vdimm unknown : Thermalright SI-128
Fyonne : Pentium D 915 (Presler, revision unknown) : 3360Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown

Pentium 4 (90nm)
DraGGarD : Pentium 4 630 (Prescott, revision unknown) : 3200Mhz@unknown Vcore : Abit IP-35E : Ram unknown : Ram Speed, timing & Vdimm unknown : Noctua NH-U12F

Pentium 4 (130nm)
lohwenli : Pentium 4 2.8Ghz (Northwood M0) : 3500Mhz@1.525vcore : Abit IS7 : OCZ Platinum EL DDR400 : DDR500@2.5-3-3-7, 2.8vdimm : Generic Thermaltake heatsink
DraGGarD : Pentium 4 2.4c (Northwood, revision unknown) : 3300Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown


AMD K8 Microarchitecture

Athlon64 X2 Dual Core socket AM2 (65nm)
Powerslide : Athlon64 X2 3600+ AM2 (Brisbane G1) : 3000Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown

Athlon64 X2 Dual Core socket AM2 (90nm)
rainingzero : Athlon64 X2 3800+ AM2 (Windsor F2) : 2700Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown
Tachlio : Athlon64 X2 3800+ AM2 (Windsor F2) : 2500Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown
tapirus : Athlon64 X2 3800+ AM2 (Windsor F2) : 2480Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown

Athlon64 X2 Dual Core socket 939 & Opteron Dual Core socket 939(90nm)
Gsan : Athlon64 X2 3800+ 939 (Toledo E6) : 2900Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown
LittleLinnet : Athlon64 X2 4400+ 939 (Toledo E6) : 2310Mhz@1.4V Vcore : MSI K8N Neo4 Platinum : AENEON DDR400 1GB*2 : 210MHz, 2.5-3-3-7 & Vdimm@2.65V : Actic Cooling Freezer 64 Pro
overclockalbert : Opteron 170 939 (Denmark, revision unknown) : 2500Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown

Athlon64 single core socket 939/754 & Opteron single core socket 939(90nm)
ktek : Opteron 144 S939 (Venus, revision unknown) : 2700Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown
olcheong : Athlon 64 3000+ s939 (Venice, revision unknown) : 2600Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown
eeor83 : Athlon 64 3000+ s939 (Venice, revision unknown) : 2450Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown
@meno : Athlon 64 3000+ S939 (Venice, revision unknown) : 2250Mhz@unknown Vcore : DFI Lanparty NF4 Ultra-D : OCZ Platinum EL DDR400 : Ram Speed, timing & Vdimm unknown : Thermalright XP-90
PeterMaw : Athlon 64 3200+ S939 (Venice, revision unknown) : 2100Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown


Athlon64 single core socket 939 & Opteron single core socket 939(130nm)
TrOwA008 : Athlon 64 3200+ s939 (Winchester D0) : 2500Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown
speedrider : AMD64 3200+ (Winchester) : 2340Mhz@1.60 vcore : Abit AN8 Fatal1ty SLi : KVR DDR400 : DDR428@3-4-4-8, 2.8vdimm : Stock heatsink

AMD K7 Microarchitecture and earlier
AthlonXP (130nm)
TrOwA008 : Athlon XP 2400+ (Thoroughbred B, revision unknown) : 2200Mhz@unknown Vcore : Mobo unknown : Ram unknown : Ram Speed, timing & Vdimm unknown : CPU Cooling unknown

Statistics
32 Overclocks total in database

This post has been edited by lohwenli: Feb 6 2008, 05:44 PM

Teh Tarik Section (previous events)

V1:Completed
Date: 20 October 2007
Venue: One-Stop Complex
Time: 2pm until 7pm


From left:
neoxz, cch2007, powerslide, AceCombat, sonicscourge, @meno, shawnlut , lohwenli, NSR


we're having lunch together
V2:Completed
Date:29 November 2007
Venue:Green Lane McD
Time:8.30pm-11.30pm
Objective:knowing new friend and COD F3

we didnt take any pictures due to dark environment and actually.........................................we forgot.

1st OC party



This post has been edited by lohwenli: Apr 15 2008, 03:16 PM

Will clean up the top threads tomorrow, have to sleep already..
(falling sick )

use photoshop then send the pic to me

Yup, cos Ace not available to mantain any more.

I'll add you to our contact list, but you won't be in the OC list until you post your OC screenshot.

Agreed, though I suggest a slight change in the order
Nickname : Proc : Proc Speed : Vcore : Mobo : Ram : Ram Speed & timing :Vdimm: Cooling Device(eg-model of hsf, watercooling)

for example
lohwenli : Pentium 4 2.8Ghz (Northwood M0) : 3500Mhz@1.525vcore : Abit IS7 : OCZ Platinum EL DDR400 : DDR500@2.5-3-3-7, 2.8vdimm : Generic Thermaltake heatsink

I'm gonna dig through the old V2 & V1 threads over the next few weeks to find those missed out.

Well, actually we're not that strict..as long as nobody gets pissed off..I for one do not like it when there's a whole bunch of pointless posts..lose track of what we're discussing about..

I'll start a side list of those who haven't sent in their screenshots.

Welcome, the more the merrier.

Updated the requirements for the OC database, there will be a seperate list for verified and unverified overclocks. A copy is here for those lazy to read the front page.

If you want to be in the database, submit your screenshot (showing CPU-Z & at least one of the stress tests), and one and info in the following manner :-

Nickname : Proc (including core name & revision) : Proc Speed & Vcore : Mobo : Ram : Ram Speed, timing & Vdimm: CPU Cooling

for example
lohwenli : Pentium 4 2.8Ghz (Northwood M0) : 3500Mhz@1.525vcore : Abit IS7 : OCZ Platinum EL DDR400 : DDR500@2.5-3-3-7, 2.8vdimm : Generic Thermaltake heatsink

To be in the database either:-
1. Penang is your hometown
2. ypu stay in Penang for long term (Study or work here)

Stress tests required for verification (need 1 at least to be in verified list, with exception of record runs using either normal ice, dry ice & LN2)
1. 1 hour prime95/orthos (1 instance per core for prime, 1 instance per 2 cores for orthos)
2. 32M super pi (1 instance per core, not counted if stress test takes less than 30 mins)
3. 1 hour OCCT (this may be revised to 30 mins)
4. Other stress tests may also be accepted, as long as they can stress ALL cores 100% and are at least 30mins-1 hour long. List will be added as necessary.
OCs which are verified stable 24 hours or more will receive special mention


Do me a favour and give me your spec again

This post has been edited by lohwenli: Jan 2 2008, 04:35 AM

Made some minor corrections to the OC requirements, all specs mentioned are now required (you can include other things if you want). Was typing in a hurry earlier.
Thinking of starting a list for GPUs as well, how about it?

I'm not sure about that, anyway to be a member you just need to OC something, doesn't matter what. Thing is, listing for GC OC is different from CPU OC (it'll be something like Core/Shader/Memory. Also thinking of a benchmark database.

Nasty... Will update when you're done.

Updated the OC database with the new format. All similar processors are now grouped together, equivalent server & desktop chips will be grouped together but different core counts and transistor size will still be grouped seperately.

A lot of information is missing, as previously didn't request for processor revision, mobo, ram & cooling info (damn there's a lot of 'unknowns' in the list). Please help out to add in you missing info, btw overclocks using different hardware (Proc, mobo, ram, cooling) will count as seperate OC attempt, but same hardware but different settings (eg vcore) will still count as an improvement of the same overclock.

If you ever decide to throw that away, throw it to me instead. Not really interested in buying it, just rather salvage it for parts than see it contribute to the ever growing piles of electronic trash.

386 PSU don't hope to sell, it cannot be used for ATX systems (its AT form factor, not ATX). Hard disk I think good for paperweight only..its got even less capacity than thumbdrives nowadays..

Hey! I'm only using 20"..not wide screen somemore..
House PC worse still..17" CRT..

Even with angpow and I sell off a large chunk of my rig, also cannot afford la.. 24" is out of my reach..


The mushkin's casing is nice though, but there is a issue about ripple voltage..damn scary lo..

What am I, the big bad wolf?

Guys, how about a TT next week?

Possible times
-Monday-Friday 8pm onwards.
-Saturday-Sunday 12noon till 10pm (have to get back early cos have to wake up early on weekends).

Suggested venue
-Greenlane McD
-Khaleel (outside USM yeap chor ee gate)

Just make your own suggestion on time and venue. I will make the final decision.

Things to discuss
-starting regular TT meets (like every month)
-CC Lanparty (lets go frag each other)
-any thing you wanna crap about..

Btw rainingzero, @meno & my stuff you can put together, whichever of us you meet you can pass all at one shot. Your fan regulator I'll post to you (free) if I can't meet you.

---

Added on January 8, 2008, 6:05 pmWoof woof

This post has been edited by lohwenli: Jan 8 2008, 06:05 PM

You can chat about anything to do with PC as much as you want. Other things I'll close one eye, as long as you don't fill pages with it..


3850 is cooler than 8800GT/GTS, thats for sure. 3870 is about the same as 8800GT when both are loaded, but 3870 is still cooler than 8800gt on idle.

Replied your PM on this.

Done

Trust me, its a lot of fun..
And there are a few games which support this, supreme commander and some flight simulators. The experience is unbeatable..
But too bad, I'm too broke to set it up..only get to play for a while with borrowed LCD.

This post has been edited by lohwenli: Jan 15 2008, 06:50 AM

It applies to all DDR2 ram. Manufacturers are taking heavy losses due to massive stockpiling last year in anticipation of Vista, so now they've shut down many of the DDR2 production lines to clear stock and push prices up to profitable levels before resuming production. They're also slowly moving over to DDR3, but don't expect DDR3 to become affordable (but still above DDR2 price) in anything less than 1-2+years. Flash & GDDR ram are also affected, even worse in fact. Samsung is selling off their GDDR3 stock below cost, 1/8 of the usual already low price of other manufacturers.

There's no way it'll remain silent at 610W, only at low-medium load it'll be silent. At 83% efficiency its still got 100W+ of wasted heat to dump out of the PSU. And thats assuming it doesn't have to deal with the heat of the PC itself.

Yeah, ram prices are very near rock bottom. Any lower and manufacturers will start taking losses.

Usually if hard disk play hide & seek with you, check the cable..
If still got problem, check the board, if no problem then time to RMA the HDD..for Seagate I have no worries anymore, their RMA damn reliable and fast, just make sure you send to Seagate directly and not through the shop. Go online, fill up the form, & post to them. I poslaju on Fri, got my replacement on Wed, delivered right to my doorstep. The packaging damn terror man, box is big enough to stuff 8 hdd but only contain 1..rest is protective foam..duduk on it also no problem..

Its AUTOSOL la..

GRAB IT!!!
Seriously, thats a damn good deal..stupid card just needs to be reflashed to a lower speed..the factory OC is unstable..

Recap finish lama dah..didn't I tell you?

Yeah, Pristine is closed at 1-stop..
I went to BJ this week, it looks like its closing down, but I'm not sure..

We could use the temp sensor for our 'project'..adrian, what day are you free after new year?
Damn, I forget you're not online much..probably you won't read this at all..