Hmmm... I noticed something interesting today. I got a belt pouch for my N82. Each time I take out my phone from the pouch, the screen show as if it entered camera mode and back to standby mode.

I did some test and noticed that the magnet causes the camera to switch on (@_@)

I put the back of my phone with the camera cover to one of the magnets (which is near the camera cover when the phone is in the pouch) and viola, camera interface activated, and as I keep the phone there, I can even take shots (which are black because the cover is closed). When I put the phone 1 inch away, it goes back into standby mode.

I then tested by putting the phone in the pouch and just do some light shakes (the pouch is slightly thicker then the phone) and the camera activates and closes and activates and closes, sometimes the forward camera activates (@_@)

So something at the cover mechanism is reacting to the magnet on the pouch. Anyone else experience this? I got the pouch from Novacell.

Does anybody know anything about this mymaxis deal of RM1688 for N82? Apparently bloody maxis locked the left soft-key to "mymaxis" which is some suckass wap portal. anybody knows how to remove this?

plus there is an acute "shortage" of N82 in low yat and sg wang all the low life dealers jacked up the price to "RM2899" - that's a figure they pulled out of their ass. 

yup, all-in-one and separate download for Garmin XT as well

probably the built in camera switch uses the magnetism mechanism to detect the opening and closing of the switch hence if you bring a magnet close the phone will mistaken it as you opening the shutter switch. just a guess

Today, when my fren took a look at my N82, he returned it to me immediately with an ERROR on the screen and says it needs to be restarted - that was quite scary. Anyone encountered this problem before?

price for ap set increased also.
haih...
why why why????

hi there add me to the list too~~
just bought an AP set from lowyat..
rm1740
well,too bad got it slightly more expensive compare to all of you
did survey from sg wang till lowyat
all giving me rm 1.8-rm 1.9k omg

anyway to leave the backlight on when using GPS?
i tried the GPS just now,and the max i can leave the backlight on was 60 seconds..

damn kao annoying having to keep pressing a button to re enable the damn light.

or is there a setting im missing here?

Wat program using??Garmin or Nokia Maps??

Wen navigating it will always in backlight on condition..

If "GPS Data" use backlight setting for the phone i.e. 60sec.

For Garmin XT can set the light time in settings.

OK two big problems:

1. I am using GMXT with the 6 months ago map as provided in the guide. I realized that the map shows update slower than I drive and I wasnt even going fast, I was doing about 50 - 70kmh only. And if I took a different route than its shown on the GPS, it takes too long to even realized I took a different route and equally as long to re-calculate route. Do you face these problems with the 2.20 maps? Anyone would like to share their experience?

2. Playing with the camera-mode gave me another error message and told me to restart. After I restart, my relative set off fireworks tonight and I took the video of the 148 shots of fireworks. Just when it's about to finish, it showed another error and the video was not recorded successfully.

I used the original memory card provided. I doubt it's the card speed. I've seen other users reporting the same error I have on other forums. I am using GMXT 4.10.60 and map v2.15. Sheesh... Maybe gonna reset my phone later.

---

Added on February 15, 2008, 9:15 amLooks like I need to wait for the US version of the firmware cause right now the latest firmware is only released in EU.

Changes / Improvesment made from firmware 10.0.046 to version 11.0.117:
    *  Camera application:
          o Improvements of 'Unexpected error...' probability when starting up with quick succession of camera lens cover open/close
    * Music player (Music player stability):
          o Fix for music player freeze when operating app from accessory remote controller e.g. BT headsets, AD-54 etc.
    * Map application:
          o Reset fix when opening Map app from landmark app
          o Long Map app closing time
          o Address search in Chinese character

i cannot find at malsing for the All-in-one for 2.20

do you patch the file together? or it is all in one from malsing?

last time i patch the file together the road name are showing by initial only

example: Kuala Lumpur it come out K L only