xixo,no psu yet ka?waiting for u to OC..
still no one tried the ta770?my hands are really itchy...
n my ram is freezing...keep asking for more vdimm...they dont want blanket,they want to get burnt inside

guys!help2!tuniq tower 120 or ttbtvx?which is better?if the performnce is on par,ill pick ttbtvx,coz tuniq cost me 50 more

This post has been edited by alive88: Jan 2 2008, 08:45 PM

overclock result of TA770

don't wanna comment anything about it until i try it by my own


Attached thumbnail(s)

nearby 3800+ F3 ... almost or 3.4... for stable clock

Bro pws
how much u pump vdimm for 5-4-4-7-11?

on da way..haha..
i can give pinjam my 690g.. haha.. xda la freezing ram tue

Dude, just check. My Vcore is able to go to 1.676. I think your board or bios had issue.

can't go higher than that?? too little for extreme ocer like dblooi..haha

Nope but 1.676 is high for me. Unless your going for water cooling. Maybe also cause the board was design for Phenom.

true , max 1.676v support is more than enough for stable overclock (24/7 usage)
but i guess still not enough for extreme overclockers like bro xixo_12 and AoiNatsume

I dont think MSI is that kinda board manufacturer like abit, biostar and others.

maybe MSI's R&D is fully concentrate on intel platform development , no time for AMD
anyway all the best to bro AoiNatsume , hope he solve the problem somehow.
IMHO, if use water cooling + ice , most probably oc will stop at 1.7v
( Tried to pump 1.8vcore b4, cannot raise the clock speed also due to the temp )
1.67v is around 1.7v .... shouldn't make a big gap

whahhah thats damn good..1.8v even iced also no go eh db?

*Please do not try this at home,folks*

1065MHz 5-5-4-5-11-2t 2.2V now


All extreme overlockers here

-pWs-

different proc got different potential

sorry bro pws, me just free to online now
will attach my screeny soon ...

---

Added on January 3, 2008, 12:41 amPWS,
seems like bro CV aldy answered yr question
ya, if using WC becareful on the PWM side, especially when running orthos.

If my memory serve me right, u told me b4 u RMA yr mobo twicw due to Orthos right?

My DFI rig was busy running Orthos@ 3.4G, 1.575Vcore for whole afternoon...
refer CPU-Z for my setting....will let u know why I added the heatsinks


Pls refer to your mobo pic, I highlighted the PWM MOSFET where I attached my digital thermal probe.
I am running WC, with my setting as shows by CPU-Z.

(Ambient temp around 26C in air-cond room, my rig is put outside of casing, ventilation is better than opened case)
All my PWM MOSFETs got small copper heatsinks on it, without top 120mm fan running, the Idling temp around 50C+.
Once running orthos, around 10 mins later the MOSFETs temp will shoot up >90C.
Keep in mind that PCB is quite good at heat transfer (due to the copper trace, especially on the packed PWM side, thicker trace found due to high current load)
Those 90C+ heat will transfer to surrounding components (mostly via convection I believe), so think by yourself what is the CAPs temp look like?

At this time those heatsinks I stuck on top of CAPs, temp >65C cos I can't even rest my hand on it >10 sec!!!
Well, I think it is time to turn on my 120mm fans on top of PWM circuit....

Within 1 min my temp measuring point drop to <60C
Those heatsinks on top of CAPs <40C.

So conclusion is I will never run orthos test >1hr without extra cooling
Although those electrolyte CAPs are designed to stand around 100C, judge your self will the lifespan of mobo drop without extra cooling?

Heatsinks might not be necessary but extra fan to me is a MUST when running Orthos >1hr.

Hmm...time to stop my Orthos now and check how is the temp look like
After 2 mins the temp measured below 40C with the 120mm fan running

I treated my mobo nicely with extra cooling since Socket A platform and me used > 4 mobos for the last 5 yrs (3 mobo were Abit NF7-S V2.0).
2 of the NF7 kong due to stupid lighting kissed my mobo via LAN/ phone line. The other mobos still working till recently I sold it off)

OK, time to surf Garage Sales.....

This post has been edited by ongbs: Jan 3 2008, 01:41 AM


Attached thumbnail(s)

haha if cooloing nice sure can...thats what he said to me

need help..it seem i stuck at HTT = 300..

kenot go higher..need advise so that i can up some more my htt..more into OC my ram..

try to get the most out of it..thinking of 1150 - 1300mhz..

any advise ..ermm

[attachmentid=371001]

Proc: 5000+ Black Edition
Ram : Crucial Ballastix Tracer PC6400 2x1g

thanks

This post has been edited by apengfx-: Jan 3 2008, 12:53 AM

@ongbs
Thanks for the advice.
Is time for me to garage sales too

@apengfx
More details on your rig please?

-pWs-

woah..thanx for this info bro...
I will heed your advise and add a fan blow to pwm.Oh..its me rma 3 time DFI...dunno why

aiyo...my bad...
thought was bro PWS