mind to list down your rig? what's the mobo that you are using now?
and what's the vdimm that you currently use?
from the SS , it seems u need more vcore

Proc: AMD 64 x 2 5000+ Black Edition (300x10.5@1.3125v)
Mobo: DFI Lanparty UT nf590 sli-mr2g
Ram: Crucial Ballastix Tracer PC 6400 1G x 2 (currently running : 1052 Mhz 5-4-4-12 @ 2.2v)
PSU: Silverstone strider 560watt


i increse the HTT and lower the cpu multiplier so that it will maintain at that speed(stability tested). do i still have to increse the vcore?

tq

increase ur voltage.. n try to use 5-5-5-15, u must play with ur vdimm or vcore.. htl, try to lower down first.. u must put this into last step..

my x2 3600+ is gone...



waitin for...



This post has been edited by ah_khoo: Jan 3 2008, 09:06 AM

okay. try first

thanks

bro, just a suggestion, why not put up all d specs in ya siggy, easier for you and others when it comes to opinion seekin.

btw, nice rig u have there...

@ah_koo
retail 3800+ mana angkut??

nice if have SLI summore..haha

aik bro, my nick is ah_khoo, not ah_koo leh...

angkut dari lain forum loh... manyak harta karun over there...

hopefully luck will be with me...

This post has been edited by ah_khoo: Jan 3 2008, 09:25 AM

What forum?? Share2

-pWs-

my H malfuntion...wakaka
gud luck bro

i'm in sgp, so u guys will roughly have some ideas where it's.

clue:


i've made 3600+ d "korban" for this unproven f3, hopefully it won't fail me else i'll be damned pissed...

just as i start to love my el cheapo 3600+ but came this irresistible (thou unproven) f3, somethin gotta be sacrificed and sadly it's d poor f2. tried last nite it managed to run @ lower voltage after almost 24hrs of burn in.

This post has been edited by ah_khoo: Jan 3 2008, 09:42 AM

If you failed, you can always get Black Edition.

well... extreme once awhile just for a change
well,, its basically due to my disatisfaction with my old gigabyte mobo which max out at 1.5v thus im unable to go more than 3.5Ghz.

though my main purpose of getting this board is in preparation for phenom's new stepping, its still rather disappointing....

then again, the board quality is extremely good. It will be able to withstand huge heavy heatsinks, well, mainly it was indeed designed for crossfire X

And regarding the voltage issue, its with the bios. The old bios are able to go 1.57v (ver1.0) and the new bios which come shipped with my board(v1.1) is maxed out at 1.47. Currently im getting support from msi hopefully they will come out with a better bios =)

i would rather take d hard way which makes d result pursuit sweeter...

well, am on lite oc only so extreme voltage is not a must for me. i hate seein temp > 65'c on load and i hate noise + settin up wc oso, so i gotta settle for moderate oc.

This post has been edited by ah_khoo: Jan 3 2008, 09:58 AM

my temps when running 3.55Ghz @ 1.55v barely even hit 40c on full load... if you were me im sure you will be pretty pissed that the board limits you before the temp does.

if d temp won't kill ya chip, d voltage will. it's too much for my liking, guess we're not on d same side.

seriously d temp is awesome with that amount of voltage...

bro AoiNatsume, interview you a bit
how's your balistix tracer? nice?
1066 or 800?

My mobo do not have a function for changing cpu multiplier.
Just using Auto OC from the bios and got 2.6Ghz max higher.

Who teach you can OC normal processor using multiplier?
We mainly use FSB bro, unless its black edition.

dont worry...i pump till 1.69 before and my proc still nice....dare not go further though

---

Added on January 3, 2008, 1:25 pmbut sometimes we lower the multiplier to get higher speed

---

Added on January 3, 2008, 1:30 pmyour mobo is 7050 pv? i tried to google but nothing...issit 7050-m2?

This post has been edited by dj.eRicZzz: Jan 3 2008, 01:30 PM