wow , bro ongbs lap ur proc????
still have warranty onot??
AMD® Socket-AM2/AM2+ Overclocking thread (V4), Cockcroach AMD :P
|
|
 Dec 26 2007, 02:41 PM
|
 
Senior Member
848 posts Joined: Jan 2007 From: Ipoh Perak Malaysia  
|
|
Quote|
|
|
|
|
Dec 26 2007, 02:44 PM
|
Senior Member
1,083 posts Joined: Sep 2004
|
QUOTE(amd_hardcore @ Dec 26 2007, 02:41 PM) wow , bro ongbs lap ur proc???? aiya..x kisah warranty lah...this F3 from china, wanna claim warranty kah? still have warranty onot??   Nanti i kan lap till all wording gone! Make sure it really flat  tengah run Orthos ni  This post has been edited by ongbs: Dec 26 2007, 02:47 PM Attached thumbnail(s) 
|
|
|
Dec 26 2007, 02:45 PM
|
|
Senior Member
848 posts Joined: Jan 2007 From: Ipoh Perak Malaysia
|
hheheheheh...
if u can get 2000 grit sand paper pm me ya.... i oso want it.... |
|
|
Dec 26 2007, 02:46 PM
|
Junior Member
54 posts Joined: Aug 2006 From: Ipoh , Perak . 
|
QUOTE your vcore.... quite high adiwhat's ur cooling? Mind to share? from the SS, you are overclocking your ram adi... what you can do is .. a) change command rate to 2T b) lower down the memory divider to 533 or 400 c) change trfc to 195ns ( if cannot boot, change back to 127.5, judge the situation by yourself ) look at your SS, i afraid your proc adi reach the limit  Thank for suggestion from dblooi , i use stock cooler only , Normal use like download movie and watch movie the cpu temp reach between 50c and 57c !!Maybe i will change other powerful cooler later , but my big problem is i lower down the memory divider to 533 or 400 , it directly no display and not any beep sound come out ! If change command rate or trfc also like that !!!  Got any suggestion again thanks...... |
|
|
Dec 26 2007, 02:51 PM
|
Senior Member
1,347 posts Joined: Jan 2003
|
QUOTE(ongbs @ Dec 26 2007, 02:44 PM) aiya..x kisah warranty lah...this F3 from china, wanna claim warranty kah? wow..that is hot.The smart guardian known to be off about 9-10c..if measure with coretemp.. Nanti i kan lap till all wording gone! Make sure it really flat tengah run Orthos ni that mean core temp shud about about 58-59c liao laaaa |
|
|
Dec 26 2007, 02:59 PM
|
|
Senior Member
1,083 posts Joined: Sep 2004
|
QUOTE(HMV DVD @ Dec 26 2007, 02:46 PM) Thank for suggestion from dblooi , i use stock cooler only , Normal use like download movie and watch movie the cpu temp reach between 50c and 57c Powerful cooler? Seem u need it badly, My F3@3GHz using Germin II <50C full load! (2x120 fans running at low speed, quite) !!Maybe i will change other powerful cooler later , but my big problem is i lower down the memory divider to 533 or 400 , it directly no display and not any beep sound come out ! If change command rate or trfc also like that !!! Got any suggestion again thanks...... Wanna buy my few mths old Germin II? Me bought RM149 that time (4 to 6 mths, forgot liau), since we are both from Ipoh, easier COD ma.... Added on December 26, 2007, 3:01 pm QUOTE(CV6149 @ Dec 26 2007, 02:51 PM) wow..that is hot.The smart guardian known to be off about 9-10c..if measure with coretemp.. ya lah, me wanna test my Thermaltake SilentWater WC ma...just passed 2hrs Orthos test with radiator fan running at low speed! that mean core temp shud about about 58-59c liao laaaa  Yr F3 lap till mirror-like ka bro? This post has been edited by ongbs: Dec 26 2007, 03:07 PM |
|
|
|
|
|
Dec 26 2007, 03:02 PM
|
|
Senior Member
1,347 posts Joined: Jan 2003
|
QUOTE(ongbs @ Dec 26 2007, 02:34 PM) Me near J.Jusco, and u? I cant take any picture ..no digicam....not lapped till mirror-like lah bro... Just lapped the edge more with 1000 grid sand paper. Will upload photos later  (Photos updated). I lap cause wanna make sure the proc surface is flat, to me I feel that even lap till mirror-like the results not much different.  i lap with 800>1000>2000..make it flat..check with razor blade...n no till the copper like came out la... |
|
|
Dec 26 2007, 03:42 PM
|
Senior Member
1,404 posts Joined: Apr 2006 From: ...... 
|
QUOTE(ongbs @ Dec 26 2007, 02:59 PM) Powerful cooler? Seem u need it badly, My F3@3GHz using Germin II <50C full load! (2x120 fans running at low speed, quite) bro ongbs busy cari business here Wanna buy my few mths old Germin II? Me bought RM149 that time (4 to 6 mths, forgot liau), since we are both from Ipoh, easier COD ma.... when you gonna start , let me know ok?  maybe i can bring my stuffs and oc together |
|
|
Dec 26 2007, 04:21 PM
|
|
Senior Member
1,083 posts Joined: Sep 2004
|
QUOTE(dblooi @ Dec 26 2007, 03:42 PM) bro ongbs busy cari business here No lah..u ah...OC Nut... when you gonna start , let me know ok? maybe i can bring my stuffs and oc together Dun want u to rip and rape my pity F3  |
|
|
Dec 26 2007, 04:25 PM
|
Senior Member
857 posts Joined: Feb 2007
|
QUOTE(ongbs @ Dec 26 2007, 02:34 PM) Me near J.Jusco, and u? i live near maxwell college there. = = i also using geminII.But mine orthos at AMD 4000 2.7Ghz get 49celcius...not lapped till mirror-like lah bro... Just lapped the edge more with 1000 grid sand paper. Will upload photos later (Photos updated). I lap cause wanna make sure the proc surface is flat, to me I feel that even lap till mirror-like the results not much different. QUOTE(amd_hardcore @ Dec 26 2007, 02:45 PM) hheheheheh... wow if could find it in ipoh tell me also.if u can get 2000 grit sand paper pm me ya.... i oso want it.... |
|
|
Dec 26 2007, 04:41 PM
|
Senior Member
3,102 posts Joined: May 2005 From: Penang *̡͌l̡*̡̡
|
QUOTE(amd_hardcore @ Dec 26 2007, 02:45 PM) hheheheheh... Butterworth got a lot la~ If need buy i can help on that if u can get 2000 grit sand paper pm me ya.... i oso want it.... But do post the result here woo |
|
|
Dec 26 2007, 06:10 PM
|
Senior Member
1,051 posts Joined: Feb 2005 From: Somewhere Out There 
|
can get from Ace hardwares, i got my 1200 and 2000 grit from there, already stock up 5 pcs of each for future use hehe.
|
|
|
Dec 26 2007, 08:41 PM
|
|
Senior Member
857 posts Joined: Feb 2007
|
Where is Ace hardware?
|
|
|
|
|
|
Dec 26 2007, 09:23 PM
|
|
Senior Member
3,102 posts Joined: May 2005 From: Penang *̡͌l̡*̡̡
|
Hi, all i need some help my friend wanna buy new AMD Quad Core.
May i know what type quad core u all recommend?? The mobo he choose is DFI 790Fx-M2R http://www.xtremesystems.org/forums/showthread.php?t=169064 but still cant find in Malaysia~ Can anyone help me on this?  This post has been edited by tachlio: Dec 26 2007, 09:24 PM |
|
|
Dec 26 2007, 09:38 PM
|
|
Senior Member
1,051 posts Joined: Feb 2005 From: Somewhere Out There
|
QUOTE(Oxburg @ Dec 26 2007, 08:41 PM) Where is Ace hardware? Ace hardware which i know of are as below- The Summit USJ - Mid Valley - Ikano - Sunway Pyramid New Wing |
|
|
Dec 26 2007, 10:40 PM
|
Senior Member
653 posts Joined: Jan 2007 From: Originated From Hell. Status: Lazy.
|
PWS,
Please add me to the list: AMD X2 5000+ Black Edition| DevilMan | MSI K9A2 - AMD 790FX | Team Elite DDR2 PC2-6400 2GB Kit | DDR2 800Mhz | 5-5-5-15-24 | Xigmatek HDT S1283 This post has been edited by DevilMan: Dec 26 2007, 10:55 PM Attached thumbnail(s) 
|
|
|
Dec 26 2007, 10:49 PM
|
Senior Member
2,827 posts Joined: Mar 2007 From: MALAYSIA
|
QUOTE(ongbs @ Dec 26 2007, 02:44 PM) aiya..x kisah warranty lah...this F3 from china, wanna claim warranty kah? Bro ongbs,you run 3.1Ghz with 1.488V? Nanti i kan lap till all wording gone! Make sure it really flat tengah run Orthos ni Not too high ka the voltage? |
|
|
Dec 26 2007, 10:58 PM
|
Senior Member
971 posts Joined: Aug 2006 From: Penang
|
QUOTE(DevilMan @ Dec 25 2007, 10:30 PM) 8x at pcie 2.0 is equally pcie 1.0 16x. so it will be running 16x 8x 16x 8x pcie 2.0. Well no, if running Crossfire with 2 cards then its 16x 16x PCIE 2.0. If crossfireX with 4 cards then it drops to 8x 8x 8x 8x PCIE 2.0. This is explained on AMD's website (on the page about the 790FX chipset).QUOTE(CV6149 @ Dec 26 2007, 02:06 AM) Just lap my beloved proc.The IHS is damn worst without lap. 10C..at first I thought, no way..The edge is sticking up than the middle..now is flat and smooth. improve about 10c from load temp.. But the weird thing is still the diff temp btw the core. It doesnt change much!.... But then I saw you're using watercooling..no wonder la.. QUOTE(^KamilskaZ^ @ Dec 26 2007, 01:27 PM) btw,interested to here if realy that LE1600 it's can really oc 3ghz since it's come by stepping f3. @meno managed to overclock one to 2.9Ghz on a mobo without voltage adjustments. No screenshot cos didn't have time to install windows before he left (he's staying in penang, the system is at his hometown).any result of it? QUOTE(ongbs @ Dec 26 2007, 12:54 PM) haha bro, me also lap my F3 last night, but not till mirror like lah! as u said, the edge feel higher...just lap the side more. the AMD stepping/wording still can see! QUOTE(ongbs @ Dec 26 2007, 02:34 PM) Me near J.Jusco, and u? Wow, yours is pretty uneven before lapping (based on the difference caused by lapping). None of the X2s I've used have been that uneven.not lapped till mirror-like lah bro... Just lapped the edge more with 1000 grid sand paper. Will upload photos later (Photos updated). I lap cause wanna make sure the proc surface is flat, to me I feel that even lap till mirror-like the results not much different. |
|
|
Dec 26 2007, 11:07 PM
|
|
Senior Member
1,083 posts Joined: Sep 2004
|
QUOTE(ocz @ Dec 26 2007, 10:49 PM) Bro ongbs,you run 3.1Ghz with 1.488V? wat to do...my DFI not stable running 3GHz@stock Vcore Not too high ka the voltage? Added on December 26, 2007, 11:09 pm QUOTE(lohwenli @ Dec 26 2007, 10:58 PM) .............................. yalor, so me lap it kaw2 aldy Wow, yours is pretty uneven before lapping (based on the difference caused by lapping). None of the X2s I've used have been that uneven. This post has been edited by ongbs: Dec 26 2007, 11:09 PM |
|
|
Dec 26 2007, 11:09 PM
|
|
Senior Member
2,827 posts Joined: Mar 2007 From: MALAYSIA
|
QUOTE(ongbs @ Dec 26 2007, 11:07 PM) wat to do...my DFI not stable running 3GHz@stock Vcore Ya,i think you're right.Mine running 3.2Ghz need 1.45V only BUT the vdimm is 2.25v.I tried 2.15v but cant boot always error. |
|
Topic ClosedOptions
|
| Change to: |  0.0262sec
 0.50
 6 queries
 GZIP Disabled
Time is now: 6th December 2025 - 12:45 PM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.