3870 X 2 + foxconn quantum board = 28k++ 3DMark, i wonder when play crysis = smooth game when use tis combination, emm planing to buy tis card, wanna try Cross fire

able to hit 28k++ in 3dmark?
wonder what version of 3dmark used for bency

Artifacts? You mean stuttering intro movies? Those aren't artifacts btw...That is a known issue with HD3850 cards...7.12 solved it and its back with 8.1...

OMFG,
very disappointed with the 3dmark06 score,
anyone know whats the problem with my 3870?

I am using E6600 @ 3.2Ghz,
2 x 2gb ram @ 1066mhz...


Attached thumbnail(s)

Thats a good score..whats wrong with that? DOnt put too much emphasis on 3D mark btw...they tend to be like that...unexplainably good or extremely bad scores...but yours aint bad

good score?
i thought it could archieve 10k above >.<

@cschun86 - ur score kinda low for a 3870 paired up with E6600...mine with Athlon X2 4000+@2.8ghz can achieve around 9200+

ok wat... 9k ++ for E6600 is reasonable

Nah... I use cheap and simple equipments but the cleaning process is time consuming and tiring if you really wanted to clean out most all of the dust inside your case . I'm using syelek brush (can buy at hardware shop which the fur made from goat's fur) and normal water paint brush (remember the old-school-times? ). Basically I just sweep the dust off the hardware with the two brushes mentioned. I'll deattach the fans from the casing for cleaning. Then I'll use cloth (feel "wet" but isn't "wet ~ sorry as I no idea how to describe it ) to wipe the dust off my case . If the cloth is dry, the dust wouldn't be able to wiped away easily. That's how I do the maintenance on my rig .

Combination of brushes and cloth .

Then why would our body's electrostatic charge will harm the equipments even it's not turned on?

Hi guys

You may want to check this site out

http://209.85.175.104/search?q=cache:wlFxx...lnk&cd=14&gl=fr

How the heck do electrostatic harm the equipments? When you put the heatsink on the CPU, electrostatic ions are formed. When you screw, ions are formed. Almost anything you do physically will cause ions to form. Even when the electronics perform their functions, and when heat is produced, ions are formed. Do they harm your computer? Care to explain?

Electromagnetism has the potential to affect, but not electrostatic ions.

either overclock your now processor higher or get a new quaddies n clock even more confirm can get 15k instantly

This post has been edited by skylinegtr34rule4life: Jan 29 2008, 04:38 PM

oc some more la
lol

The rig doesnt mean for hardcore OCing,
I wana use it at 7/24 setup,
i think this is the best to set at 3.2ghz lo..

I am waiting Q9xxx to come out,
then i will kutip the Q6600 that ppl dump out

---

Added on January 29, 2008, 5:01 pmThe rig doesnt mean for hardcore OCing,
I wana use it at 7/24 setup,
i think this is the best to set at 3.2ghz lo..

I am waiting Q9xxx to come out,
then i will kutip the Q6600 that ppl dump out

This post has been edited by cschun86: Jan 29 2008, 05:01 PM

that ain right
show me ure cpuz screenshot..
and need to see ure sm2/sm3/cpu scores.

My OC spec is like below,
just the GC is change,
and i can provide u the sm2/sm3/cpu score,
becoz I am using the 3dmark06 basic version only...


Attached thumbnail(s)

omg u got the lowest based on the 3dmark06 online result there...
with such proc I dun think you should get that kind of score.
too many app in background perhaps?

already try vacuum on my board and cpu also.last week and seriously dead by electrostatic.

first problem my P4 Ht can't enabling HT on bios and windows show only one cpu graph.when enabling on bios,it's hang and try reset already kong both.

now where the problem come if not from vacuum 1500 watt?

Hmm, I am not sure also,
this afternoon i test again,
shut off all application,
shut off antivirus,
and bare in mind that i am using 2 x 2gb ram >.<

9.3k score also for this afternoon bency...

---

Added on January 29, 2008, 5:19 pmhmm, i think using vacum cleaner would not a problem,
but just remember to discharge it,
dun switch on immediately after u clean it,

are u switch on immediately after u clean it?

This post has been edited by cschun86: Jan 29 2008, 05:19 PM

not by rushing to installed.just take a call and around 20mnt and that result happen.