yes, it works.

just me ocd…haha.

btw i am not using the built in wifi…i connect to other access point.

btw…anyway to turn off that bright green light on wps button?

This post has been edited by BOTAK_WAI: Aug 23 2023, 01:50 AM

most of the suggestion is to cover it with electrical tape haha, if your not using WPS , maybe disable for both 2.4G and 5Ghz not sure if that would do the trick since its a WPS button.


Im having a hard time tracing the connected device on each wifi , maybe its time to just configure it as a passthrough device

ya…just tape it…haha.

already disable wps and all wifi, but the light won't go off 😂

u can rename those connected devices under connectivity column mah…
just that u need figure out the mac address for each device lo…mafan abit.

having a seperate access point means you can place the X50-5G near to the window or corner of wall or somewhere facing nearer to the cell tower, while the separated access point can place at more strategic location for better wifi coverage.

This post has been edited by BOTAK_WAI: Aug 23 2023, 12:55 PM

yeah but you wont know which wifi the device is connected haha

Use a masking tape 😂😂😂

I notice when i play dota connected to the Tplink-X50 using U home 5G it's really laggy. Anyone has this experience? Or should i get a mesh wifi or another access point wifi router?

use a card and blue tack 😂
tape will leave residue 😂

test using lan cable to verify lo

This post has been edited by BOTAK_WAI: Aug 24 2023, 03:58 PM

How u guys lock nr5103e to only 5g n not fall back to 4g??

choose nsa/4g (auto switch)

tick only b28 and n78

place the router at the place with signal strength stronger than -85 (-80 is stronger than -85)

yeah.. i allready lock to this b28 and n78 but it tends to fall to 4g/lte sometimes... speedtest shows less than 50mbps.

mine now shows -97.. guess i got to move the router around to find a spot.. wish this router have the option to use a battery pack.

where do ur see the running temp?

also does it have an app or way to track the connected devices data usage?

-97 signal too weak la

why need see the running temp? the router doesn't even get warm at all.

I bought a Three Zyxel 5103E router. I inserted a Unifi mobile sim into it and it works. But when I inserted a U Home sim into it... it didn't work. Shows connection down status. It did detect the sim card.

Funny thing is that the U Home sim works in my phone.

This post has been edited by mintec: Aug 24 2023, 09:34 PM

Can I use a normal mobile 5G postpaid plan sim card in a 5G router like the TPLink Deco X50 5G?

U need to set apn my3g settings for umobile

Just curious coz many mention running on 5g fires it up. Hahaha. Im usin the zyxel as the main wifi.

Its weird that some part in my house can get -85 but 5g status bar is only 2 n lte is full.

Bear in mind rm38 postpaid got monthly quota of 30gb

u got turn off roaming or not?

if your location signal is ok and your hotspot quota enough, i don't see why not.

Yes