Try to use this value.
Copy it on a paper with full name..and see whether the option exist in bios.
CHange it to this..use div 533 dun put too much volt.2.v shud be enuff....
then try it...

Let us know if this ok..

Walau eh, another crazy nut busy for whole night, SPI 1M result only improve 1s (Iced WC - infected by our OC Guru - bro dblooi )

Max 3800+F3 speed that able to boot into XP and passed SPI 1M test was 370x10=3.71GHz, DDR2~1250MHz, PI 1M = 23.687s.

Mobo: Abit AN9 32X, Am2 3800 F3, mod WC with Thermatake Waterblock
+ Thermaltake 400L/h Pump + Swiftech Radiator (able to mount 2x120mm fans but this time fans were taken out to soak the radiator into the iced water).

Refer to photo attached, radiator coolant during action was around 18C. CPU under load still >40C@1.6V.

Previously with WC alone this rig max speed passed SPI 1M was 3.5GHz@ 24.453s. Can't go any further, I judged the max speed limit by the F3 proc.
The purpose to carry out this test is to confirm the previous max speed 3.5GHz was limited by the F3 proc not the Abit mobo.

But I am not like our OC Guru bro dblooi, brave enough to pump iced water directly into waterblock (i just soak the whole radiator into iced water )

The max speed 3.71GHz achieved at Vcore= 1.6V, Vdimm=2.3V, DDR2~1250MHz 5-5-5-5-12 (need to borrow 10th Anni Crucial from bro db liau )
refer the attached photo for detail.

Sorry I didn't attached CPU-Z screeny cos it keep on crashing with the Abit Guru program

This post has been edited by ongbs: Oct 30 2007, 05:57 AM


Attached thumbnail(s)

Nice result you hav bro. Go for 100% oc

-pWs-

This SS is the only thing i can manage to do.Orthos always failed.
Many people said that Biostar TA690G can go far in OCing,and thats is true.
But the problems is that i cant bring it to far with 3800 Windsy F2.

Maybe ill try again after this OR later.

I think still can go more a bit.
Loosen the MAL and increase some vcore if needed.

-pWs-

Actually im still in the process of getting to know the mobo bios.
So many things to change here and there and so many options (not like gigabyte)

Average ive seen windsy F2 user can only OC until 2.6 with stock HSF.

This post has been edited by ocz: Oct 30 2007, 08:31 AM

Many options only fun ma.
Yup...around 2.6GHz.
But who knows? Maybe u get the same gem processor as Sempronic do

-pWs-

Sempronics procs? cannot lar,thats 1 in a million i think.

O tried to clocked to 2.5Ghz but the problems is my windows always restart after a while and when i run 3d mark,it stuck.
I have increase the vdimm and vcore.But still the same probs occur.

Maybe you guys can help me a bit here.

Play w MAL and tref. And play w multi and div too

-pWs-

congrats ongbs for breaking in 23s zone
i'm sure u can go further if you straight away pump ice water into waterblock

@ocz..
windsy u baru lagi ker?
dulu mcm rasa u pkai lain

@ongbs
jgn dgr ckp dblooi.. rosak baru tau

---

Added on October 30, 2007, 10:45 ambro play with divider, hard to push more if ram limiting ur OC

This post has been edited by xixo_12: Oct 30 2007, 10:45 AM

kalau db boleh ganti F3 baru .....i bukan dengar ja oh....terus bubuh dry ice atas F3 loh
dapat -20C kasi core F3 pecah terus pun tak ape

---

Added on October 30, 2007, 1:05 pmdon't lah bro, i haven't figure out how to terbalik my mobo yet
btw bro, which waterblock r u using?

This post has been edited by ongbs: Oct 30 2007, 01:14 PM

Nolah bro xixo..its my oldie windsy

Only now can perform a bit after changed mobo..

Its his brand new life.

Oh ya,is it possible for windsy to run vcore above 1.5v-1.6v with stock HSF?

dun think so gua...
f2 windsy very hot le...

try r, who knows
using stock is not recommended..

Anyone here use MSI K9VGM-V mobo for overclocking?

if u ask like that, sure u cant find the ppl.. ask about the bios setting.. almost same ..maybe can help

hmm... im kinda newbie in oc... juz wanna learn learn...
btw, i heard that the Black edition of AMD is pretty gd at oc...

but the price too xpensive.. futher more the stock speed alredi high..
so didnt feel any different

btw ain't MSI board no gud for ocing?
even u get the bez proc oso not nice to learn wif right?