Is ok. Have fun
And please do SPI 32M to enter the AM2 proud member list

-pWs-

690g member in da house.. hope u can show ur skill using this mobo..

what a crazy fellow ~

haha he alreadi enter the extreme oc guy..
so nothing weird..
got superb hardware

yesterday i was damn sad...i thought i burn my ram already...just 3 days old lol...yesterday after oc oc oc..i can reach 2.6 but then after that, suddently auto off and cant on back...then found out is the ram problem...tried reset bios..and everything still cant on, i even try every single slot...then just now i took a 512mb and put in here to use it temporary while test my 1gb at other computer...it sucessfully boot...then i was like...:swt:...then i take n put back my 1gb to my comp n try and it boots like normal....

actually what happen ah?

This post has been edited by dj.eRicZzz: Oct 29 2007, 01:46 PM

loL...
so use ice water to cool down ur oced rig...
wif fish pump...
so it's ice water fish cooling....

@dblooi
took some pic let us see ur working area la~

thats rite...wanna c ur haven..

my setup now stable enough..what do i need to change?

Mobo Tforce 550

Brisbane 3600+ @ 2.7GHz
vcore 1.3v in bios

ram Micron D9
ram speed i set to Auto and the ram oced to 540MHz
timing set to AUTO. only command per... i set to 2T
vdimm = 2.10v

** i suspect the problem comes from the ram

It is always better for you to attach the ss.
CPU-z w CPU Tab and Memory Tab. If can, Memset as well.

-pWs-

shutdown?? what is ur psu??
I have experience this b4.Im lucky didnt take any of my hardware...

I have read and article by xbitlabs...and nforce 590sli mobo full load during 3d play could consume about nearly 400w of power!!!
This quite shocking to me.....this shud not take as an accurate figure since we using a diff chipset/mobo...but take it as a ball park...
add that with hdd,gc,overclock proc power consumption=???watt
F3 3.3g takes about 150w already(roughly

SO tepuk dada tanya poket!!
heheh

here is the link..

http://xbitlabs.com/articles/chipsets/disp...i_17.html#sect0

This post has been edited by CV6149: Oct 29 2007, 06:31 PM

ur ram bro.. try to loose ur timing, n play with safe voltage.. use divider as wel.. then to OR back..

1. timing i set to auto..so any recommend timing to try?

2. what do u mean by safe voltage?2.1v not safe edi?


-pWs- i'll try to run memtest later.

wut ram u using now??
any active cooling at the ram??

FYI, -pWs- mentioned about memset, not the memtest, this two have different application

2.1v is safe for the value ram only with no heatspreader

This post has been edited by xixo_12: Oct 29 2007, 07:06 PM

it's micron d9gkx and no passive or active cooler.

Sorry missread..i thought memtest

i have memset with me now.so what i supposed to try?

wow gkx.. i think it able to hit high mhz with low voltage..
now u try to stay at 2.1 only..
try to lower ddr533, n push again the HT

try this timing 5-5-5-15
trfc set to 195

@sjn
tell here how the thing going.. glad to help ppl

Thanx bro..ill learn abit then if i success,ill send over the SS to you so that i can join all the AM2 sifoo..

---

Added on October 29, 2007, 10:05 pmHuhuhu...thanx for the warm wellcome
I dont have any skills to show unless you give me a bit of your OCing skills.


This post has been edited by ocz: Oct 29 2007, 10:05 PM

i try to increase the trfc to 195ns..others same as before.

300HTT and all the ram setting set to auto except 2T.vdimm stick to 2.1v

test with rightmark RAMtest

bro show ur cpuz lar...
easier for us to refer ur settings oso...