AMDŽ Socket-AM2/AM2+ Overclocking thread (V3), Phenom... Here AMD goes
|
|
 Oct 22 2007, 04:51 PM
|
 
Junior Member
85 posts Joined: Apr 2006 From: SamaGagah | Prai Industrial Area   
|
I'm currently using Asus M2N-E ( latest bios )... I seem to be stuck at 2.9GHz on my brisbane 4000+...
Right now i'm using Multiplier = 10.5X, FSB = 278MHz, Vcore = 1.35V, Vdimm = 1.95V (My Mobo's Highest Setting)... any idea of how to reach at least 3.0 on this mobo... The settings are not very flexible though... |
|
|
|
|
|
Oct 22 2007, 04:57 PM
|
 
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(dblooi @ Oct 22 2007, 04:08 PM) all the best in ur try... Dun hav. Lowya one  oh ya, DFI ultra2-M2 don't have CMOS setting reload function rite?  QUOTE(bh-4 @ Oct 22 2007, 04:51 PM) I'm currently using Asus M2N-E ( latest bios )... I seem to be stuck at 2.9GHz on my brisbane 4000+... How much your max vcore supported??Right now i'm using Multiplier = 10.5X, FSB = 278MHz, Vcore = 1.35V, Vdimm = 1.95V (My Mobo's Highest Setting)... any idea of how to reach at least 3.0 on this mobo... The settings are not very flexible though... -pWs- |
|
|
Oct 22 2007, 05:05 PM
|
Senior Member
3,569 posts Joined: Apr 2007
|
QUOTE(xixo_12 @ Oct 22 2007, 03:26 PM) here is 32M Good SPI 32M time 22min 59s -pWs- update mine k.. 3800+ X2 Windsor F3 | xixo_12 | Biostar TA-690G | Crucial 10th Anniversary DDR2-667 | Xigmatek S963 3399mhz also the timing is below single stick only [attachmentid=315617]  This should be the lowest AM2 time so far in this thread  High OC + good stability  |
|
|
Oct 22 2007, 05:10 PM
|
Senior Member
1,347 posts Joined: Jan 2003
|
QUOTE(dblooi @ Oct 22 2007, 04:08 PM) all the best in ur try... Press DEL+INSERT both when restart pc after hang or failed oc setting.. oh ya, DFI ultra2-M2 don't have CMOS setting reload function rite? currently running orthos for 3.3g@1.35v btw dblooi i bought new psu already....fedup! FSP 600w gln |
|
|
Oct 22 2007, 05:15 PM
|
Senior Member
1,404 posts Joined: Apr 2006 From: ......
|
QUOTE(-pWs- @ Oct 22 2007, 04:57 PM) Dun hav. Lowya one haha nola...just a bit inconvenient ..... hehe How much your max vcore supported?? -pWs-  QUOTE(CV6149 @ Oct 22 2007, 05:10 PM) Press DEL+INSERT both when restart pc after hang or failed oc setting.. why fedup bro? what happen? currently running orthos for 3.3g@1.35v btw dblooi i bought new psu already....fedup! FSP 600w gln  |
|
|
Oct 22 2007, 05:19 PM
|
|
Senior Member
1,347 posts Joined: Jan 2003
|
oh no, silap2...fedup with old psu..not new one..hahahha
 the new is f**** great!! This post has been edited by CV6149: Oct 22 2007, 05:20 PM |
|
|
|
|
|
Oct 22 2007, 05:21 PM
|
|
Senior Member
1,404 posts Joined: Apr 2006 From: ......
|
QUOTE(CV6149 @ Oct 22 2007, 05:19 PM) oh no, silap2...fedup with old psu..not new one..hahahha haha ic...drooling the new is f**** great!!  i solve my PSU problem adi...change to a thicker wire...actually i misplaced it oredi |
|
|
Oct 22 2007, 05:26 PM
|
|
Junior Member
85 posts Joined: Apr 2006 From: SamaGagah | Prai Industrial Area
|
QUOTE(-pWs- @ Oct 22 2007, 04:57 PM) Dun hav. Lowya one i dunno what the max is... i never scrolled up until the top but i saw until 1.65 is available... How much your max vcore supported?? -pWs- blurry... no matter what i do it seems like the proc is unstable at 2.95GHz... it doesnt restart but failed orthos and 32M pi |
|
|
Oct 22 2007, 05:41 PM
|
Senior Member
1,051 posts Joined: Feb 2005 From: Somewhere Out There 
|
aiks.. just noticed BH-4 is in AMD OC thread too, ur hsf should arrive to your place by wednesday
 Btw, 1.65 is pretty good already, my board only goes max up to 1.55vcore... |
|
|
Oct 22 2007, 05:47 PM
|
Senior Member
7,318 posts Joined: Nov 2006 From: Pulau Sipadan
|
QUOTE(dblooi @ Oct 22 2007, 04:34 PM) something wrong with the temp reading program , or bios alreadi update to R69AM913.bst quite weird..  QUOTE(ronaldjoe @ Oct 22 2007, 05:05 PM) Good SPI 32M time 22min 59s ya ke?? dunno pown..haha This should be the lowest AM2 time so far in this thread High OC + good stability Added on October 22, 2007, 6:07 pmsum one helping me in temp, me myself dunno how to think about it, haha This post has been edited by xixo_12: Oct 22 2007, 06:07 PM |
|
|
Oct 22 2007, 08:53 PM
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(bh-4 @ Oct 22 2007, 05:26 PM) i dunno what the max is... i never scrolled up until the top but i saw until 1.65 is available... Use lower div somemore. blurry... no matter what i do it seems like the proc is unstable at 2.95GHz... it doesnt restart but failed orthos and 32M pi If tat speed cannot, then try to increase Vcore. -pWs- |
|
|
Oct 22 2007, 10:29 PM
|
Senior Member
986 posts Joined: Jul 2006 From: :: infront the steering ::
|
QUOTE(dblooi @ Oct 22 2007, 04:32 PM) what happen to ur monitor? my monitor already rosak ar.... btw....did u try 3.6GHz already? and have to RMA my crucial.... using backup value ram how to OC so high? 3.3ghz is the highest for this RAM...cannnot go more... |
|
|
Oct 22 2007, 11:34 PM
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(sempronic @ Oct 22 2007, 10:29 PM) my monitor already rosak ar.... So RMA the ram alraedy? Manage to contact him??and have to RMA my crucial.... using backup value ram how to OC so high? 3.3ghz is the highest for this RAM...cannnot go more... -pWs- |
|
|
|
|
|
Oct 22 2007, 11:37 PM
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
Aiks...still cannot boot 3600MHz...
 But w some update here  
DDR1280 Crucial 10th really nice ram -pWs- This post has been edited by -pWs-: Oct 22 2007, 11:37 PM |
|
|
Oct 22 2007, 11:57 PM
|
|
Senior Member
1,347 posts Joined: Jan 2003
|
arghhhh poison la you pws.....
what volt u feed ur anny? |
|
|
Oct 22 2007, 11:59 PM
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(CV6149 @ Oct 22 2007, 11:57 PM) arghhhh poison la you pws..... Our board max vdimm what volt u feed ur anny? -pWs- |
|
|
Oct 23 2007, 12:06 AM
|
Senior Member
1,701 posts Joined: Jul 2006 From: Malaysia
|
yay...i'm new here...trying to OC my 4200+ ..
so far, now i'm using 2.5ghz and stable, 1.248v bus speed 229.5 |
|
|
Oct 23 2007, 12:13 AM
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
QUOTE(dj.eRicZzz @ Oct 23 2007, 12:06 AM) yay...i'm new here...trying to OC my 4200+ .. Your processor IIANM can reach 2.5-2.7GHz. so far, now i'm using 2.5ghz and stable, 1.248v bus speed 229.5 Is it Windsor F2?? -pWs- |
|
|
Oct 23 2007, 12:19 AM
|
|
Elite
8,545 posts Joined: Aug 2006 From: 224.0.0.6
|
Below are two ss tested w SPI 1M using different divider.
27.922s 
26.750s 
Conclusion: Higher ram speed yields more good SPI result  -pWs- |
|
|
Oct 23 2007, 12:36 AM
|
|
Senior Member
1,347 posts Joined: Jan 2003
|
dj ericzz,
that proc shud be able to get 2.7ghz@1.45v OT stable with good cooling This post has been edited by CV6149: Oct 23 2007, 12:45 AM |
|
Topic ClosedOptions
|
| Change to: |  0.0323sec
 0.52
 6 queries
 GZIP Disabled
Time is now: 20th December 2025 - 05:53 AM |
Quote