kindly use PM button if it related to personal matter

@-pWs-
using wut cooling?? ur NH-U12F??
temp at 3.5ghz plz...

Should be around 50 + - for core temp

-pWs-

idle or full load?

what happen after u tried? Cannot boot into windows?
or stucked there and need to clear CMOS?
how much vcore that u use?

yeah...i adi dump it...the new fish pump very powerful...
but too bad no time to OC lately...many things to do

haha hardmod ur fish pump ar??

Half load

Ermmm...the bios keep restarting.
Vcore: 1.575v

-pWs-

yeah.....2000 L/H fish pump
hopefully my waterblock won't spoil bcoz of the strong water flow

hmm...icic. need more vcore i guess

edited: oh ya, in my case...my trfc has loosen to 105ns ...75ns cannot tahan..though i face no problem when i try it with 800 divider
the problem is not bcoz of vcore i guess...

This post has been edited by dblooi: Oct 22 2007, 02:37 PM

Okie. Hehe..
I will lower down the trfc and try again.
I thought u said can SM the ram ma

-pWs-

edited:
internet prob...

This post has been edited by xixo_12: Oct 22 2007, 02:59 PM

tis is the new result..

[attachmentid=315610]

@dblooi
u can use tis at ur WTS thread

This post has been edited by xixo_12: Oct 22 2007, 03:02 PM

Nice result w good SPI1M score.
But your both cpu-z ss showing cpu details only.
Where is your memory details? What timing you use??

-pWs-

here is 32M

-pWs-
update mine k..

3800+ X2 Windsor F3 | xixo_12 | Biostar TA-690G | Crucial 10th Anniversary DDR2-667 | Xigmatek S963 3399mhz


also the timing is below
single stick only

[attachmentid=315617]

@xixo_12
Updated. May I know how much vcore you use for your 3.4GHz???

-pWs-

adding +0.3xx in bios, xx dun remember, 1.472 as shown in cpuz.. but sumtimes it flactuates.. but the temp using xigmatek alredi reach at 60C and not thinking to add more, but it pass SPI edi, orthos 1024FFT around 15min also pass

i thinks cpu-z read wrong info . 1.472v wont be 60c on xigmatek 963 testing pi 32m , i thinks ur vcore >1.47v

all the best in ur try...
oh ya, DFI ultra2-M2 don't have CMOS setting reload function rite?

haiyo guys......
will back in OC stuff later....
need to send back my RAM to RMA....
then need to find a monitor...
mine already gone...

what happen to ur monitor?
btw....did u try 3.6GHz already?

something wrong with the temp reading program , or bios