acctually some times not the different of the wyre from china and malaysia or taiwan.some times u buy a malaysia at brand als wilt melt or spoil event u havent start move into ur house.

---

Added on May 20, 2012, 11:17 pmdc motor is better for folding gate but the sound is very lound.....acctually the swing gate can last longer than arm gate...even it always water go inside the base.....if the new set of swing gate can be last at least 3 or 4 yrs for new installation part als cheap after repair

---

Added on May 20, 2012, 11:27 pm


acctually malaysia brand n italy brand sliding gate is als good
some of the italy brand have overhead cut
sliding gate motor can last longer than swing

This post has been edited by soonys: May 20 2012, 11:27 PM

I did not connect my autogate system to pillar light because I already had one with individual switch. I prefer to switch on my pillar light the whole night and not only when the gate open. Besides, I have a motion sensor spotlight installed directly above my car porch wall, so whenever my gate open it sense movement and automatically switch on. Much more brighter than pillar light.

when I bought the house....I choose opposite of the street light! so it's already bright enough for my car park, pillar light are just for decoration for me

I'm from Pg Island with sliding autogate. May I know how much for the motor & which brand? Please share. Thanks.

for sliding gate u can try to use mag , celmar , n genious for malaysia brand if italy u can try to use FAAC , DEA AROUND rm1400-2200 the price does metter the important is service

hi guys. i've been looking high and low for auto gate with installation and wiring. maybe i haven't found the right one. any recommendation for a budget but good unit? my budget is around 1k++ all in. if u guys have contact it'd be great.

if there's any seller here also welcome to pm. thanks!

What is yoru 1k++?

1001? 1100? 1500? or 1999.

expect to be minimal 1.5 to 2k inclusive of wiring..

Without hacking a basic wiring maybe already 300 to 500. A reasonable autogate is about 1.0 to 1.3k..

Hi, can anybody recommend a good sliding autogate? and the price package range?

I was quote RM1,300+ for a sliding autogate

if ur ppl want to install wiring in conceal i suggest u ppl better take a underground cable it can more save for u if long term......for sliding u can use g-force ,celmar ,or mag for malaysia brand dea ,faac ,came for italy brand

---

Added on June 5, 2012, 9:00 pmif u say wiring without hacking rm300 to rm500 u should know wat mm the wiring is

---

Added on June 5, 2012, 9:01 pmim a installer n consultant also at kl,sel area

This post has been edited by soonys: Jun 5 2012, 09:01 PM

Maybe you can quote the requester. I am not the one required. Wiring can be very expensive too. A nicely done gi expose wired can be costly but really solid and nice.

We, Weng Shin Enterprise Sdn Bhd has been established in 1990,With our professional engineers and sales personnel,we has been work in this industrial more than 10 years.

We are able to offer custom- made design that is able to suit different clients needs and provide them with up market quality products.
We also provided many design to let our clients to have a extra choice.

We are sincerely looking forwards to co-operating with you and we believe with our best price and high quality service, we could be your best partner.

We are specialist in Stainless Steel,Wrought Iron,Mild Steel Gate,Windows,Grills and Other S/S M/S products design,making,install.We are also specialist in poly carbonate.

VISIT US~http://wengshinent.blogspot.com/

Hi

Anybody know what's the market rate for mild steel gate now? I've been getting quotes ranging from RM210 to RM320 pf

Thanks

I was quoted rm190per sqft by issac k&y engineering for wrought iron

This post has been edited by Biskut coklat: Jun 13 2012, 10:56 PM

how much does an autogate system with lock at the bottom cost?
to prevent this from happenning
http://www.youtube.com/watch?feature=playe...d&v=I66U0DCcQls

You meant solenoid lock rite?

This video is fake where the "Gear Lock" has been released, this is why the robber can open the door easily with minor force. I guess those with DCMoto or Casa Asia autogate system installed will understand my meaning.

Attached is the picture of how to release or lock the gear.

This post has been edited by mhhee: Jun 14 2012, 09:14 AM


Attached thumbnail(s)

Correct term should be, override

Hi Biskut

Mind sharing your gate supplier contact? Thanks

This post has been edited by random101: Jun 14 2012, 09:38 AM

any user of unigate by delux? m attracted to the trackless system...

Can i use CAT 5 Network Cable for the 7-Core cable? 3-Core Power Cable enough?