Thank you for the reply. Do you provide that?
Care to PM price and package?

Those are the model we deal with as authorize dealer and installer at Klg Valley.

If interested and staying within Klg Valley can whatsapp us at 0122019294 - Alex Lee

For Dnor Turbo 880 now got Merdeka Offer RM1,499/= while stock last only

https://www.facebook.com/photo?fbid=2445904...459122263711446

This post has been edited by dblcss: Aug 7 2025, 11:18 PM

Hi anyone can advise if DC 975 will be suitable for a 24.5ft x 6 ft fully aluminium trackless gate?

Yes can support.

No issue with it. GFM975 basically built upon GFM925W with new controller board with far better speed controller. But of course the newer GFM975 has around 1-2 second slower operation than GFM925W but better speed cushioning.

AFAIK DCMoto seems to no longer produce sliding gate motor. They only focus on swing / swing fold / trackless fold operated motor.

Sliding gate you can consider DC brushed motor local or Italy and DC Brushless motor from Italy that comes in 24V and 36V.

Just wondering for gate width of 189” of this type foldable, non trackless type, what’s the estimated cost?


Attached thumbnail(s)

Gate folding metal about RM7-8K with autogate system

Hi sifus,

This is my first time buying and installing a front gate for my new house.

Specifications:

Stainless steel frame
Aluminium panels
Size approximately 14 feet x 5.5 feet
Swing gate
Comes with an inner door
Dnor auto gate supplied separately; installation cost paid

I have a few questions:

1. For the part highlighted in red in the photo — is that cover piece normally included, or does it require a top-up? I thought it was included based on the design I selected, but when installation day came, the seller said I had to top up RM300 (we negotiated down to RM250). Is this a common practice or not? The second photo shows my current gate waiting for that cover piece.

2. What worries me more is that after three days, the wall near the gate looks like it’s starting to crack. I noticed some other sellers recommend using three hinges instead of two. Should I ask my gate supplier to add one more hinge to each gate leaf?
Please refer to the last four photos.

I would really appreciate any advice.

Anger bar normally depand on the gate fabricater, sometime when the price quoted is very low of cause whatever add on will be chargeable. Normally for full aluminium frame type will be included to cover the gap.

Wall hinge area crack is due to the weak pillar plaster. When there's movement on the gate open close by autogate sometime will hv a bit of pressure that put force on the hinge area which cause the plaster to crack. Hopefully the inner wall is solid not those weak type then shld be ok. If inner pillar wall is weak then will hv problem in long term. Putting more hinge won't help if it's the inner wall problem.

trackless gate seller will never tell you most dev original pillar cannot actually install them unless it is proved construct with rebar. The worse type entirely made out of sand bricks.

3 hinge 2 hinge has no difference if the underlaying structure is weak. And plaster crack means the structure has deformed locally.

hi sifu, i am using DCMOTO GFM925.
Recently i found that the arm seem will stuck half way randomly.
a small push will solve this issue when open/close.
any how i can fix this issue? is it the arm going weak now?

anyone using WSS autogate? how was the workmanship, service. Recently visit home expo they offer quite attractive package compare with others brand.

Hmmm how old is ur system???
If more then 2-3 years, hv u ever change the backup battery b4?
If more then 2-3 years and nvr change backup battery b4. Try take out the old battery and reset the system by disconnecting power supply connector transformer to board for 5-10 second then connect back, Will hear 7 beeping mean already reset. Try open close a few time see the system still got stuck half way. First time run after reset slow dun worry just the board testing out the gate pressure. if no problem then buy a new backup to replace the old one. After a few month if still happen open or close half way then need to change the board already.

You mean the whole gate system or autogate only???
The whole system mean gate and autogate system.
If autogate only then it's the motor system to open close gate.

Thank you sifu.
is the battery part of the problem?
never change the backup battery since installed, probably near to 5 years.

Can I just switch off the main power supply at home and restart back? would it do the same trick? wanted to reduce risk of electrocuted.

Normally we will ask customer to change backup battery 2-3 years to prevent acid leak and sometime will short circuit the board. Customer normally never change.

Yes can of the main hse DB if scare kena shock. Remember take out the battery then only reset the board and dun put back since already 5 years.

Considering Delux autogate 16-18ft. Any negative feedback ? how is their motor?
Where can i sell my used sliding gate motor, it is still very good. Replacing because renovating house.

Hi there. Our company will be providing upgrade package from Dnor Turbo 880 to DC moto 975W or Fagolli F2552 at a special rate for lawyat reader who are having problem their Dnor Turbo 880 model and cannot be settle. For those who are interested do feel free to contact us at 0122019294 for more details.

This post has been edited by dblcss: Nov 23 2025, 10:54 PM