Jo_da48, didn't you read the earlier post? watch the video over and over again, and you will find out this video are FAKE! I mean omg, look at the auntie? what kind of react she's trying to give? worst actor of the year~

---

Added on May 7, 2012, 10:50 pmYou couldn't compare yourself with the theft, I mean that's your autogate, I'm sure that you wont use 100% of your strengh to force pushing it, but the theft will use their 200% of energy to make sure your gate are destroyed to let them get in easily...


for professional house breaker, they got all the tools to get in your house! nowdays, bosch and makita are selling their proud products, using only battery powered tools, and they will cut off all of your padlock easily....dont have to find any socket outlet~

---

Added on May 7, 2012, 10:56 pmyeah~ I like the idea leave it without gate! but that could only happened staying in the rich garden, such as Gita Bayu or Country Height at Bangi,
I went inside the Gita Bayu before, and all the house are without gate, even with gate....it's only 1~2 ft tall, just for decoration purpose
it looks nice~

This post has been edited by len9zai: May 7 2012, 10:56 PM

Are you sure it is FAKE? 100% or own interpretation?

I use my full strength, because I want to check the mount on the wall. it sure are stronger than submerged system.

For house with balcony power, trip the mcb, and on it only when you need to use.

This post has been edited by weikee: May 8 2012, 10:25 AM

you watch it again, and you will find out the auntie keep looking at the camera...

---

Added on May 8, 2012, 6:59 pmYea, I don't trip the mcb, I installed another switch at behind the wall because I'm lazy to reach out DB everytime I want to use it....
as I said before....They dont have to use any power supply from your house anymore, grinder powered by li-ion battery are more than enough to cut anything!

This post has been edited by len9zai: May 8 2012, 06:59 PM

I already installed my DCMOTO 905 autogate system yesterday. Installer was fast and efficient. Initially, I plan to install my autogate system the next or next 2 days after my gate was installed because I dont want to be so rush. Therefore, I did not make any appointment earlier but once my gate was installed, it keeps open and close by itself from slight wind blow. In addition, my gate do not have padlock latch on the outside and I also could not reach the inside padlock latch from the outside so it gives me problem of how to lock my gate when I'm away.
I made a last minute call to my autogate installer at 2pm and he came at 4pm. It took him about two and a half hour to install the whole system. I'm glad that he came at such a short notice.
My DCMOTO was installed without the siren and I'm kinda feel like having one. Do you guys think its necessary to have one? Please advised.

Mine installed by today =D , stock reach earlier~ so
it took them about 3 and half hour to installed it
why do you need siren anyways?
may I ask who do you called for installation?

Good to hear that you dont have to wait till 15 May. It's really torturing having to use bricks to hold your gate still. I cant even wait for 1 day so I just ignore the 2 years warranty. I did called Winson but he's too busy and he only free to come over on Saturday noon which he told me he already had an appointment in the morning. By the way, do you live in BMC and could it be you whom he mention??
My autogate system was installed by Mr.Lim from Spectra Alarm. The siren can be use as panic alarm just like your car. In case you see someone behave strangely in front of your house or you happen to see shoes thefts climb over your gate, thats when you can use it. I dont know if its really necessary but the function was there in the remote control and keypad.

I think it's me that he mention about... what does BMC stand for anyway?
oh I know what do you mean...I understand the wiring, just have to add relay to do that stuff....planning to do myself =p

BMC stands for Bandar Mahkota Cheras. You're going to install the siren too?

---

Added on May 13, 2012, 7:53 pmI think i have the answer

I met a potential alarm supplier today (highly recommended by my colleague)...he was explaining to me about alarms and he showed me the difference between china wires and local wires...all he did was...

1) China wire : Lighted the Copper wires with a Lighter....it melted and fall off in a few seconds

2) Local wire : Lighted the copper wires with a Lighter....the copper turned red (like hot rods) but didnt melt and fall off..

I think this is the major difference...

He also mentioned...the main reason why, a lot of false alarms were caused by china wires......he then cut a piece of my existing alarm wires...and burn it...well..the result was...its china wires...no wonder i got a few times of false alarms in the middle of the night...I m not sure if he is correct...just sharing my information here with you guys on what i learnt today

I think i m gonna get my alarm and cctv frm this guy...price reasonable..and he explains a lot of things..to the extend he took out his mini tv and connect the cctv cams to show me how clear it is and which angle and location to put my cctv cams in my house...Live Demo...

I havent decided on my autogate yet..need some inputs


anyone has recommedations for Sliding Motor that slides relatively fast?

I noticed many sliding motors are very slow...

thx peeps

This post has been edited by coconutzz: May 13 2012, 07:55 PM

For sliding motor...I think FAAC not bad!

---

Added on May 14, 2012, 12:43 amoh, I live at serdang/kajang, near balakong jaya~
I'm not sure about it....I prefer install pillar light only...
does your package come with pillar light?
OTS Winson worker are actually the guy from this video lol http://www.youtube.com/watch?v=eqryQZOW4pk

This post has been edited by len9zai: May 14 2012, 12:50 AM

Hi lhsmedphy,
Mind to share your experience with the Rienzo autogate (GS2000?) that you are using? How is the after sales service from GSS gateway?

Thank you.

acctually some times not the different of the wyre from china and malaysia or taiwan.some times u buy a malaysia at brand als wilt melt or spoil event u havent start move into ur house.

---

Added on May 20, 2012, 11:17 pmdc motor is better for folding gate but the sound is very lound.....acctually the swing gate can last longer than arm gate...even it always water go inside the base.....if the new set of swing gate can be last at least 3 or 4 yrs for new installation part als cheap after repair

---

Added on May 20, 2012, 11:27 pm


acctually malaysia brand n italy brand sliding gate is als good
some of the italy brand have overhead cut
sliding gate motor can last longer than swing

This post has been edited by soonys: May 20 2012, 11:27 PM

I did not connect my autogate system to pillar light because I already had one with individual switch. I prefer to switch on my pillar light the whole night and not only when the gate open. Besides, I have a motion sensor spotlight installed directly above my car porch wall, so whenever my gate open it sense movement and automatically switch on. Much more brighter than pillar light.

when I bought the house....I choose opposite of the street light! so it's already bright enough for my car park, pillar light are just for decoration for me

I'm from Pg Island with sliding autogate. May I know how much for the motor & which brand? Please share. Thanks.

for sliding gate u can try to use mag , celmar , n genious for malaysia brand if italy u can try to use FAAC , DEA AROUND rm1400-2200 the price does metter the important is service

hi guys. i've been looking high and low for auto gate with installation and wiring. maybe i haven't found the right one. any recommendation for a budget but good unit? my budget is around 1k++ all in. if u guys have contact it'd be great.

if there's any seller here also welcome to pm. thanks!

What is yoru 1k++?

1001? 1100? 1500? or 1999.

expect to be minimal 1.5 to 2k inclusive of wiring..

Without hacking a basic wiring maybe already 300 to 500. A reasonable autogate is about 1.0 to 1.3k..

Hi, can anybody recommend a good sliding autogate? and the price package range?

I was quote RM1,300+ for a sliding autogate