Fagolli now even after increase price about RM600/= perft run all in except optional items. Max width up to 21ft for the mean time

Technically is due to the advertisement and make believe that their gate is premium with trackless system. A normal 23’ wrought iron powder coated folding gate system cost just somewhere RM 8K with the motor system. In terms of durability, both gate uses ball bearing for mechanism movement and it will worn out as years goes by.

exactly; better buy the gate and autogate system separately

Actually DELUX unigate uses third party motor which is DC moto.

And Fargolli is using DC Moto GFM925 too

For normal swing or folding gate yes can get gate and autogate system from separate vendor but for trackless is normal sold one whole full set because of the pricing and knowledge of setting it up. And not all autogate installer are familiar with folding gate system especially trackless. The installer must hv knowledge on how to find out the gate is installed properly or not. Even normal track gate the gate installer also dunno how to properly test the gate after installation. They will just hold the center second pc gate to push and pull to show customer the gate dun derail and get stuck. and that is not the proper way. Vendor who have real knowledge will really know how to test the gate before installing the autogate system and put the customer mind at ease. If you get a cheap installer without knowledge to install the gate or the autogate system then the customer will be the one stuck in the middle when both vendor push the blame left and right when something goes wrong like derail, gate stuck when opening or motor stop when too much pressure.

A few of our customer face this problem with gate vendor but after we speak to the gate vendor about the problem then they will quietly settle the problem. They may be able to built the gate but doesn't mean they can know how to properly test it.

Anyway how you want to decide who to appoint is up to the customer but make sure the vendor really experience one.

Anyway all the best and Gong Xi Fa Cha to all who celelabrate CNY. Huat ahhhhhhhh

Fagolli is using DC Moto because it's a subsidiary of the company. Delux use to use DC Moto also but maybe because to cut down their cost for the autogate system they go for arm type now which is so ugly when combine to trackless system. For me not because we are supporting any brand just in our point of view with DC Moto the trackless system look more impressive and elegant. Design and outlook after installation play a big part when customer are paying such high price compare to normal track metal gate system. If not important then just pay RM6-8K all in for a normal swing or folding track metal gate. Why pay so high if u just want a gate system that open and close when you get home or go out if not you want the design and outlook. For security purpose of cause the is none when someone want to go in your car porch area with the additional autolock also no use because they can just climb in. The autolock is just to make their job more difficult and delay them from easily access in. For security is better hv an IP camera which can alert you on the HP when there's any movement within your car porch area. Even better more if u hv an alarm system which u can trigger from your HP app when CCTV app alert you when it's not false alarm.

This post has been edited by dblcss: Jan 19 2020, 03:49 PM

hi, i recently changed my gate and kept the old autogate system with solenoid lock.
after few days only (silly me) i noticed my new gate not actually locked due to the person who installed the new gate position the solenoid lock bit higher (right picture) compared to original gate (left picture).
I plan to call the contractor back to install it a bit lower but i also noticed the circled part is missing.
can it still can lock w/o the circle part?


tq in advance!

For those gates around RM 6K to RM 8K can work as good as those trackless ones ONLY the gate fabricator get the right measurement for gate bearing hinges position. Most iron gate fabricator choose to ignore this problem they face, that’s where trackless gate being the answer. I’ve solved numerous folding gate having issue with centre bottom roller getting stuck upon trying to close the gate. And there are times I manage to open wider than before like shaving a few inches more space for customer to move in and out their vehicle.

Did you change the underground motor system?

Judging from both picture, your installer had “purposely” disable the solenoid lock by removing the locking mechanism pin. Looking at the second photo, I don’t see the pin in place. Somewhat being removed.

nope no change.
he said the pin already broken when he remove it from old gate.
can the lock still functioning w/o the pin?
right now i assume it is not functioning bcoz it's not fully touch the stopper.

Hey,If budget not a problem what is the best autogate system in market?

My gate specs is swing type.10feet

not sure about who's the best.. but Mydelux Unigate among the good 1.. will cost you somewhere around RM12k for 10ft

Once the pin removed, the locker mechanism won’t work. The only way is to replace the unit in order to have your gate locked by the locking system.

My suggestion is that your motor have to install way on top as each motor side takes somewhere 7 to 9 inches of your gate length in which installing at the centre or bottom might be hit your vehicle.

Im sorry.I dont quite understand what u trying to say.

I mean any motor swing system will do for your 10 feet length gate but the motor must be installed on top for clearance.

Anyone can recommend auto gate contractor for area pandan indah? Going to upgrade existing auto gate

Ur gate width a bit small compare to those renovated and make wider type. So when u add the autogate system each side will take up 6-8 inch away. Well normally is still ok to install the motor at the bottom of the gate as long u dun drive too near to the gate when going in and out time. Hv to be more careful. Unless u are driving a lorry then too bad. Normal car is ok even Toyota Camry.

If u are located within Klang valley and interested to use our service are welcome to contact us at 0122019294.

I plan to do auto gate system for my existing 14ft swing type gate..the gate made of wrought iron. Location Serdang. Need wiring too.
Can any contractors give quotation?