Lol.. Dindnt plan to sell it off huh shinjite? Make it as torrent pc?

Nah, I will let my lil brother use
All my torrents and stuffs all will be using my new PC

i think the problem that i face b4 is cause by the cable ... that what's make my hard disk won't boot ... and the other one ... the ram slot ... i think i can't run dual channel anymore ... only single channel for me now ... something wrong with the third ram slot ... if i put ram there .. monitor won't display .... isk .... too bad ...

hmm.....have you try using slot 2&4?? you still can get dual channel.

Ops.. What happened to ur rigs sang.. After changed the PSU u seems like having some problems! Maybe during the time u disassemble the PSU and accidentally loosen some pc parts? Hm... Is pity u can run dual channel atm.

By then guys, got a question here. As if in this case, i have 1.5G of ram. Which means, 2x 512mb and 2x256mb. Can i activate the dual channel function? Lets sey, Slot 2&4 for 512mb and 1&3 for the 256mb. Is that possible?

might be something wrong with ur ram stick too.
Have you check the rams stick if it is workable on other PC or other slow?
or try slot 2 and slot 4

---

Added on September 23, 2007, 2:21 pmyou can try plugging it...
then use CPUZ to check if the memory is running under dual mode.

This post has been edited by choongkeat: Sep 23 2007, 02:21 PM

Theorically, it is possible. but would be depending on other factors such as mobo limitations. Read more @ http://en.wikipedia.org/wiki/Dual-channel_architecture

Ic.. Cos i just grab a pair of Corsair XMS, then plan to run 1.5G ram if can. Due wanna test vista ultimate.

I saw some news and forums saying that Vista will be turn back into XP after SP1 of vista..
not sure how true is that...

Wah.. True? Meaning vista will be changed back into XP agian? Any source?

just a prank lah...

oredi try with that but wn't work ... rite now i'm on 216Mhz FSB ... can boot windows but restart after that ... set the vcore at 1.4125V .. can boot windows and restart ... then up the vdimm (this is for ram rite?) to 2.65V .. still testing at the moment ... suddenly my firefox got problem la .. iskk ... keep pop up the error msg and then close ... any clue guys?

This post has been edited by sang_karim: Sep 23 2007, 03:39 PM

i suggest you don't oc for now. reset your cmos and use stock for few days first to see if it is stable or not.

i'm reducing the fsb to 214Mhz and seems ok ... before upping the vcore n vdimm oredi priming at 214FSB for 1 1/2 hours and no prob ... when past 214FSB it's keep restarting ... is it the vcore n vdimm not enough juice?

Lol.. Want to OC.. Atleast set u vcore til 1.45v then slowly raise ur fsb. If can, set ur vidimm to 2.85v for safety. So ram need high voltage then can operate at high speed properly.

ooo...at first just go set the vcore to 1.45V and vdimm 2.85v aaa?? i thought only raise that when oc got problem ... hehe ... if like that ... i'll go set that first la ... hehehe

guys, does it worth to upgrade to a C2D platform now? currently using a 2.8C proc...

IMO.. Its depend either do u have the budget to migrate. If got, do make a move a learn something new over there.

@sang_karim

Hm.. Before do that, i mean up vdimm and vocore do make sure ur cooling system can function well. Always rmb, more voltage more heat produced. As for me, i will always make sure the system will get enough juice before pushing it. Thats why i always up my vcore and vdimm at certain level before start the OC job.

Or u may try up the fsb slowly either is 1 or 2mhz step by step until the system become unstable then start do tweaking on ur bios such like up vdimm, vcore, change the ram timing and so fort. But that will cost u alot of time thou.

BUMP sket for old skool architecture thread

oredi set the vcore to 2.45V and vdimm 2.85V at bios ... at cpuz vcore reading is 1.5V ... set the fsb rite now at 218MHz ... it restart after can boot windows ... now giving 2nd chance ...

**system restart again ... reduce the fsb at 217MHz .. i geuss my system is not gud enough for oc la ... ... u guys set the dram frequency at 400MHz or auto in bios? when i set to auto it's give me 3:2 divider ...

This post has been edited by sang_karim: Sep 23 2007, 10:36 PM