@pengster

Haha.. Powerlogic wasnt a cap palang PSU eh. Even 300W also its a quality type. My cap palang were refer to those 500W under RM80 type. Hm.. Have u ever try with change ur GC and OC again? Might be ur 68GS consuming too much power?

@Pengster

Kabu's might be right. Maybe is the driver problems. If u didnt format before, try reformat and OC again. It might be help.

@Mowgli

Hi bro.. Another old school user? Haha.. Well.. S478 mobo? Low end such like AsRock still can be found in market. Cost around 16x-17x guess. If u wanna get the high end type.. Then it will be hard. By then, ur using P4P8-- E Deluxe eh.. Good mobo there. Wanna find backup mobo?

---

Added on November 4, 2007, 1:32 pmHm.. Ur question should be as in Hardware Q&A. Sub forum of Hardware section. Wrong place. Anyways, answer for ur question. YES. There is. Next time google it 1st before ask.

This post has been edited by fylon: Nov 4 2007, 01:32 PM

@herojack41

Thats what google for. Search for it and u will know. Anyways, nVidia agp card only available until 7 series. Highest is 7900GS.

@Ray

Lol.. That card is the is rare of the rarest. Can say is quite impossible to find in the market. By then, 79GS still can be found in market.

@Ray

Yea. B2B order. Galaxy 79GS Cost around RM560.. Anyone interested can PM me for more details. *Do some businesss here..*

@herojack41

Ofcause. AGP mid range card cost around 300-400 lidat.

78GS no more on market liao. Galaxy stop producing it. That was once my dream card. But now got replace my 68GT. Anyways, u got PM about the GC thingy. Haha..

Duh.. Havent get into museum.. There were still some on the market. Btw.. 79GS need to B2B order lo. The dealer over here did not keep stock de. As less ppl looking for it.

@KahLooN

Haha.. Not really. But since im working at pc shop.. More or less can help them spy abit on the item there were looking for. By then, what type of thermal grease/paste are u guys using here? Just wanna do some survey. I was using AS MX-2.. Seems not bad.. Could keep my Prescott stay 39-41'c on idle (depend on weather).

@Ray

Seems like u had started to prepare for new game.. But anyways, i think NSF: ProStreet isnt require so much on GC. Atleast better then dirt which need GC that with SM3.

@KahLooN

Lol.. I was using MX-2. Seems not bad.. Could keep the heat monster well. By then, i read from article says, MX-2 worth buying due to the quantity more then AS5. Yup.. I was one of the NSF fan as well. Played almst all the series from the beginning until the latest Carbon.

@superdav007

Yea.. Agreed with kahloon.. Since ur using 2.8G.. No point to get high end GC, it would just bottleneck ur overall performance. Nothing much can come out. 76GT will serve u well already.

Ray.. Im downloading now thou.. Wait for me!!! Wanna try on my system also.. See how it perform. But seems like 9550 still enough juice for this game. Well.. Maybe is enough for low/mid setting. Right? Whats the setting are u using?

@Sang

Oh.. All default wo. Hmm.. Vidimm is 2.5v or auto i forgot already. Should be auto if im not mistaken. As for vCore.. I set it in auto mode as well.

@Ray

Atleat playable ma. Right? Haha.. I just tried the game this morning. Touch abit la. But seems like the graphic setting cannot be adjust so nothing much can comment for the game.

@Kabu

Haha.. Cannot yet.. No casing eh! Now hunting for casing lo. By then about the fan DUCK.. Hard lo.. The marker seems like dun wan to do business like that. PM for several time still no reply.

Yea.. Still stick with the old 10mm fan + zalman 90mm. But after change new mobo, the fan rpm get back to normal 1.9k.. Think should be the mobo problem last time. Now? Cant hunt any better hsf yet. So still stick with the hyper 6..

Haha.. Yea! Playable.. Hm.. How to capture the fps on nvidia card? Haha.. Way too long stick to ati last time. Now swap back to nvidia need to learn again.

---

Added on November 5, 2007, 12:12 pmOwh? Hm.. But i had check the vcore and vidimm using everest on 3.76G. The value for vcore was 1.3v+ never get more then 1.4v, and its same with vidimm. By then i think ur timing too tight that why cannot boot. Try 2.5-3-3-8 and see how.

This post has been edited by fylon: Nov 5 2007, 12:12 PM

@sang

Yea.. I put everything in auto/default mode then when did the oc. But 3.76G is my limit for stock setting. By then, urs not so bad too. As for ram, i will suggest u stick with CL2.5. Later take some SS and upload here.

@Ray

Ic.. Using fraps? Not same actually. For ati, there were a small program name ATiTools comes along in the 3rd party driver which can be use in game the measure the fps without another software.

P/s: By then, had u try ProStreet with ur 59XT? Swap to ur main rigs and try run the game and see how. Maybe that card can peform better then 9550?

This post has been edited by fylon: Nov 5 2007, 01:41 PM

@Ray

Owh.. That a bad news. If ur 59XT with u, it might be can perform better then 9550. Shorting off vitamin $? Haha.. Well.. Get a mid end type will do already. 76GT seems like not bad.. Can play almost all the game around.

@Kabu

Yup. 2 fan 2gether and set like what u mentioned just now. Front push in and the back pull out. What to do.. The sifu dont wanna make the fan 'duck' for me.

@sang_karim

Hows ur test sang? Found out ur maximum speed of ur proc and ram on stock voltage? Haha.. Here is the SS of my system voltage meter. My vdimm was set to 2.65v..




* Sorry for the weird reading on everest due im using Chinese language in my system. It messed up with the 'c wording.

Anyways, i think just im lucky to get this proc and ram. Really impressed with its performance. 3.84G with 1.4vcore & 2.75 vidimm.

@herojack41

Haha.. Still planning to get P4P800 Dlx? P4P800SE is enough juice already. Sang & I was using this mobo as well. Good one. For ur case, dont need to change mobo already, ur current one is doing good now. I suggest u better invest ya money on new PSU. Thats what the thing that u need to concern on if ur planning to OC ur rigs. Better PSU, supply better and stable voltage and prevent ur other hardware got burnt due not enough power. As i had experience this before, my previous XMS ram kit were burnt 1 stick due of instability voltage from psu.

And also, from ya hardware list.. Can see that ur using alot of hardware component in ur system. Is better u get a true power / pure power type.. Ever consider of getting 600W PSU?

@kabu

Haha.. Yea! I bought the zalman is beacause of the 100mm were going half dead. By then, that 90mm is quite noisy. 2.6k rpm.. Yup. Now were using sandwich fan for the hyper6.

@edministrator

Lol.. Heat? U didnt help to pump some oil in?

Haha.. Me also old liao la. Just did some casual OC to cap with my current daily usage. By then, havent found any nice cooler yet. Haha.. Now still stick my old pal.. Hyper6+.. Using push an pull system. Manage to keep my rigs on 40'c @ 3.6Ghz. Full load 44'c-47'c.. Not bad lo..

Yo pengster.. Now draw back to 2.6Gh? Haha.. Well.. If u wanna keep ur system stable thats the only way. Hm.. My mx-2? It was b2b order from my work place. I do see some forumer here is selling it, but include postage the price is higher then i bought at local here. So i choose to buy at here.. Cost me RM45.. But the quantity alot.. Worth the $$~ Hehe..

By the, whats ur 68GS score in 3dmark03? Since ur mem & core speed are faster then mine.

@Ray

Lol.. I was wander how pengster 68GS perform in his system. As his GC are far better then mine in term of both mem & core speed. Mine only mange to squeeze out 12.6k score on 30Mark03 (with official driver ofcause). And will have artifact if i OC the mem to 550 instead of 525.

@Mowgli

Haha.. Bro.. Ur P4P800E Dlx dead dy? .. Thats a bad news.. Hmm.. Maybe u try one a thread on garage sales and see what others can offer u? Haha.. I get mine with that tactic as well.

Btw way guys.. Finally i got the reply from AllnGap about my fan 'duck', it will cost me around 60+ for a custom made fan dap together with the adapter. Is worth to grab? Just wanna listen opinion from u guys.

Lol.. By default, 68GT were core 350 & mem 500 (total 1G). But mine were like Pre-clocked. Core 375 (25mhz more then normal) & Core 525 (25mhz more then normal). Last night try to OC the card but i found defect on Core 390 & Mem 550.